| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Mobile User Security (MUS) service on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.3(2) does not properly authenticate HTTP requests from a Web Security appliance (WSA), which might allow remote attackers to obtain sensitive information via a HEAD request, aka Bug ID CSCte53635. |
| Unspecified vulnerability in the SIP inspection feature on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.3(2) allows remote attackers to cause a denial of service (device crash) by making many SIP calls, aka Bug ID CSCte20030. |
| Memory leak on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) allows remote attackers to cause a denial of service (memory consumption) by making multiple incorrect LDAP authentication attempts, aka Bug ID CSCtf29867. |
| Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) allows remote attackers to bypass SMTP inspection via vectors involving a prepended space character, aka Bug ID CSCte14901. |
| The WebVPN implementation on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) permits the viewing of CIFS shares even when CIFS file browsing has been disabled, which allows remote authenticated users to bypass intended access restrictions via CIFS requests, aka Bug ID CSCsz80777. |
| Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) permit packets to pass before the configuration has been loaded, which might allow remote attackers to bypass intended access restrictions by sending network traffic during device startup, aka Bug ID CSCsy86769. |
| emWEB on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) allows remote attackers to cause a denial of service (daemon crash) via a request for a document whose name contains space characters, aka Bug ID CSCsy08416. |
| Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) allows remote authenticated users to cause a denial of service (device crash) via a high volume of IPsec traffic, aka Bug ID CSCsx52748. |
| Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2(4) and earlier allows remote attackers to cause a denial of service (block exhaustion) via multicast traffic, aka Bug ID CSCtg63992. |
| Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2(4) and earlier allow remote attackers to cause a denial of service via a flood of packets, aka Bug ID CSCtg06316. |
| The Neighbor Discovery (ND) protocol implementation in the IPv6 stack on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2(3) and earlier, and Cisco PIX Security Appliances devices, allows remote attackers to cause a denial of service (CPU consumption and device hang) by sending many Router Advertisement (RA) messages with different source addresses, as demonstrated by the flood_router6 program in the thc-ipv6 package, aka Bug ID CSCti24526. |
| Unspecified vulnerability in the IKE implementation on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 7.0 before 7.0(8.11), 7.1 and 7.2 before 7.2(5), 8.0 before 8.0(5.15), 8.1 before 8.1(2.44), 8.2 before 8.2(2.10), and 8.3 before 8.3(1.1) and Cisco PIX Security Appliances 500 series devices allows remote attackers to cause a denial of service (device reload) via a crafted IKE message, aka Bug ID CSCte46507. |
| Unspecified vulnerability in the SIP inspection feature on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.0 before 8.0(5.17), 8.1 before 8.1(2.45), and 8.2 before 8.2(2.13) allows remote attackers to cause a denial of service (device reload) via crafted SIP packets, aka Bug ID CSCtd32106. |
| A vulnerability in the Secure Sockets Layer (SSL) VPN functionality of the Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause a reload of the affected system or to remotely execute code. The vulnerability is due to an attempt to double free a region of memory when the webvpn feature is enabled on the Cisco ASA device. An attacker could exploit this vulnerability by sending multiple, crafted XML packets to a webvpn-configured interface on the affected system. An exploit could allow the attacker to execute arbitrary code and obtain full control of the system, or cause a reload of the affected device. This vulnerability affects Cisco ASA Software that is running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, Firepower Threat Defense Software (FTD). Cisco Bug IDs: CSCvg35618. |
| A vulnerability in the Secure Sockets Layer (SSL) Virtual Private Network (VPN) Client Certificate Authentication feature for Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to establish an SSL VPN connection and bypass certain SSL certificate verification steps. The vulnerability is due to incorrect verification of the SSL Client Certificate. An attacker could exploit this vulnerability by connecting to the ASA VPN without a proper private key and certificate pair. A successful exploit could allow the attacker to establish an SSL VPN connection to the ASA when the connection should have been rejected. This vulnerability affects Cisco Adaptive Security Appliance (ASA) and Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliances (ASAv), Firepower 4110 Security Appliances, Firepower 9300 ASA Security Modules. Cisco Bug IDs: CSCvg40155. |
| A vulnerability in the ingress flow creation functionality of Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause the CPU to increase upwards of 100% utilization, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to incorrect handling of an internal software lock that could prevent other system processes from getting CPU cycles, causing a high CPU condition. An attacker could exploit this vulnerability by sending a steady stream of malicious IP packets that can cause connections to be created on the targeted device. A successful exploit could allow the attacker to exhaust CPU resources, resulting in a DoS condition during which traffic through the device could be delayed. This vulnerability applies to either IPv4 or IPv6 ingress traffic. This vulnerability affects Cisco Adaptive Security Appliance (ASA) and Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliances (ASAv), Firepower 2100 Series Security Appliances, Firepower 4110 Security Appliances, Firepower 9300 ASA Security Modules. Cisco Bug IDs: CSCvf63718. |
| A vulnerability in the implementation of Security Assertion Markup Language (SAML) Single Sign-On (SSO) authentication for Cisco AnyConnect Secure Mobility Client for Desktop Platforms, Cisco Adaptive Security Appliance (ASA) Software, and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to establish an authenticated AnyConnect session through an affected device running ASA or FTD Software. The authentication would need to be done by an unsuspecting third party, aka Session Fixation. The vulnerability exists because there is no mechanism for the ASA or FTD Software to detect that the authentication request originates from the AnyConnect client directly. An attacker could exploit this vulnerability by persuading a user to click a crafted link and authenticating using the company's Identity Provider (IdP). A successful exploit could allow the attacker to hijack a valid authentication token and use that to establish an authenticated AnyConnect session through an affected device running ASA or FTD Software. This vulnerability affects the Cisco AnyConnect Secure Mobility Client, and ASA Software and FTD Software configured for SAML 2.0-based SSO for AnyConnect Remote Access VPN that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCvg65072, CSCvh87448. |
| A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly validating IP Version 4 (IPv4) and IP Version 6 (IPv6) packets after the software reassembles the packets (following IP Fragmentation). An attacker could exploit this vulnerability by sending a series of malicious, fragmented IPv4 or IPv6 packets to an affected device. A successful exploit could allow the attacker to cause Snort processes on the affected device to hang at 100% CPU utilization, which could cause the device to stop processing traffic and result in a DoS condition until the device is reloaded manually. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.2.1 and 6.2.2, if the software is running on a Cisco Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCvf91098. |
| A vulnerability in the Transport Layer Security (TLS) library of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of the affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a malicious TLS message to an interface enabled for Secure Layer Socket (SSL) services on an affected device. Messages using SSL Version 3 (SSLv3) or SSL Version 2 (SSLv2) cannot be be used to exploit this vulnerability. An exploit could allow the attacker to cause a buffer underflow, triggering a crash on an affected device. This vulnerability affects Cisco ASA Software and Cisco FTD Software that is running on the following Cisco products: Adaptive Security Virtual Appliance (ASAv), Firepower Threat Defense Virtual (FTDv), Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCve18902, CSCve34335, CSCve38446. |
| Multiple vulnerabilities in the Application Layer Protocol Inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerabilities are due to logical errors during traffic inspection. An attacker could exploit these vulnerabilities by sending a high volume of malicious traffic across an affected device. An exploit could allow the attacker to cause a deadlock condition, resulting in a reload of an affected device. These vulnerabilities affect Cisco ASA Software and Cisco FTD Software configured for Application Layer Protocol Inspection running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCve61540, CSCvh23085, CSCvh95456. |
