| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 4.4.0 and prior to version 4.14.3, a stack-based buffer overflow vulnerability exists in the Wazuh Database synchronization module (`wdb_delta_event.c`). The SQL query construction logic allows for an integer underflow when calculating the remaining buffer size. This occurs because the code incorrectly aggregates the return value of `snprintf`. If a specific database synchronization payload exceeds the size of the query buffer (2048 bytes), the size calculation wraps around to a massive integer, effectively removing bounds checking for subsequent writes. This allows an attacker to corrupt the stack, leading to a Denial of Service (DoS) or potentially RCE. Version 4.14.3 fixes the issue. |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 3.9.0 and prior to version 4.14.3, multiple stack-based buffer overflows exist in the Security Configuration Assessment (SCA) decoder (`wazuh-analysisd`). The use of `sprintf` with a floating-point (`%lf`) format specifier on a fixed-size 128-byte buffer allows a remote attacker to overflow the stack. A specially crafted JSON event can trigger this overflow, leading to a denial of service (crash) or potential RCE on the Wazuh manager. The vulnerability is located in `/src/analysisd/decoders/security_configuration_assessment.c`, within the `FillScanInfo` and `FillCheckEventInfo` functions. In multiple locations, a 128-byte buffer (`char value[OS_SIZE_128];`) is allocated on the stack to hold the string representation of a number from a JSON event. The code checks if the number is an integer or a double. If it's a double, it uses `sprintf(value, "%lf", ...)` to perform the conversion. This `sprintf` call is unbounded. If a floating-point number with a large exponent (e.g., `1.0e150`) is provided, `sprintf` will attempt to write its full string representation (a "1" followed by 150 zeros), which is larger than the 128-byte buffer, corrupting the stack. Version 4.14.3 patches the issue. |
| An out-of-bounds read vulnerability exists in the EMF functionality of Canva Affinity. By using a specially crafted EMF file, an attacker could exploit this vulnerability to perform an out-of-bounds read, potentially leading to the disclosure of sensitive information. |
| A flaw has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This issue affects the function UPnP_AV_Server_Path_Setting of the file /cgi-bin/app_mgr.cgi. Executing a manipulation can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been published and may be used. |
| Mumble before 1.6.870 is prone to an out-of-bounds array access, which may result in denial of service (client crash). |
| A weakness has been identified in LB-LINK BL-WR9000 2.4.9. The affected element is the function sub_44E8D0 of the file /goform/get_virtual_cfg. Executing a manipulation can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in LB-LINK BL-WR9000 2.4.9. The impacted element is the function sub_44D844 of the file /goform/get_hidessid_cfg. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Mattermost versions 11.3.x <= 11.3.0, 11.2.x <= 11.2.2, 10.11.x <= 10.11.10 fail to properly validate User-Agent header tokens which allows an authenticated attacker to cause a request panic via a specially crafted User-Agent header. Mattermost Advisory ID: MMSA-2026-00586 |
| Heap-based buffer overflow vulnerability in Softing Industrial Automation GmbH smartLink SW-PN and smartLink SW-HT (Webserver modules) allows overflow buffers.This issue affects:
smartLink SW-PN: through 1.03
smartLink SW-HT: through 1.42 |
| telnetd in GNU inetutils through 2.7 allows an out-of-bounds write in the LINEMODE SLC (Set Local Characters) suboption handler because add_slc does not check whether the buffer is full. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.24.0, a size_t underflow in the IMA-ADPCM and MS-ADPCM audio decoders leads to heap-buffer-overflow write via the RDPSND audio channel. In libfreerdp/codec/dsp.c, the IMA-ADPCM and MS-ADPCM decoders subtract block header sizes from a size_t variable without checking for underflow. When nBlockAlign (received from the server) is set such that size % block_size == 0 triggers the header parsing at a point where size is smaller than the header (4 or 8 bytes), the subtraction wraps size to ~SIZE_MAX. The while (size > 0) loop then continues for an astronomical number of iterations. This vulnerability is fixed in 3.24.0. |
| Improper Input Validation vulnerability.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.14, from 10.1.0-M1 through 10.1.49, from 9.0.0-M1 through 9.0.112.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.0 through 8.5.100. Older EOL versions are not affected.
Tomcat did not validate that the host name provided via the SNI
extension was the same as the host name provided in the HTTP host header
field. If Tomcat was configured with more than one virtual host and the
TLS configuration for one of those hosts did not require client
certificate authentication but another one did, it was possible for a
client to bypass the client certificate authentication by sending
different host names in the SNI extension and the HTTP host header field.
The vulnerability only applies if client certificate authentication is
only enforced at the Connector. It does not apply if client certificate
authentication is enforced at the web application.
Users are recommended to upgrade to version 11.0.15 or later, 10.1.50 or later or 9.0.113 or later, which fix the issue. |
| A flaw was found in the interactive shell of the xmllint command-line tool, used for parsing XML files. When a user inputs an overly long command, the program does not check the input size properly, which can cause it to crash. This issue might allow attackers to run harmful code in rare configurations without modern protections. |
| Improper Validation of Specified Index, Position, or Offset in Input vulnerability in Mitsubishi Electric CNC M800V Series M800VW and M800VS, M80V Series M80V and M80VW, M800 Series M800W and M800S, M80 Series M80 and M80W, E80 Series E80, C80 Series C80, M700V Series M750VW, M720VW, 730VW, M720VS, M730VS, and M750VS, M70V Series M70V, E70 Series E70, and Software Tools NC Trainer2 and NC Trainer2 plus allows a remote attacker to cause an out-of-bounds read, resulting in a denial-of-service condition by sending specially crafted packets to TCP port 683. |
| Heap Overflow in TLS 1.3 ECH parsing. An integer underflow existed in ECH extension parsing logic when calculating a buffer length, which resulted in writing beyond the bounds of an allocated buffer. Note that in wolfSSL, ECH is off by default, and the ECH standard is still evolving. |
| mmstu.c in VideoLAN VLC media player before 3.0.22 allows an out-of-bounds read and denial of service via a crafted 0x01 response from an MMS server. |
| A flaw was identified in libsoup, a widely used HTTP library in GNOME-based systems. When processing specially crafted HTTP Range headers, the library may improperly validate requested byte ranges. In certain build configurations, this could allow a remote attacker to access portions of server memory beyond the intended response. Exploitation requires a vulnerable configuration and access to a server using the embedded SoupServer component. |
| In the Linux kernel, the following vulnerability has been resolved:
tunnels: fix kasan splat when generating ipv4 pmtu error
If we try to emit an icmp error in response to a nonliner skb, we get
BUG: KASAN: slab-out-of-bounds in ip_compute_csum+0x134/0x220
Read of size 4 at addr ffff88811c50db00 by task iperf3/1691
CPU: 2 PID: 1691 Comm: iperf3 Not tainted 6.5.0-rc3+ #309
[..]
kasan_report+0x105/0x140
ip_compute_csum+0x134/0x220
iptunnel_pmtud_build_icmp+0x554/0x1020
skb_tunnel_check_pmtu+0x513/0xb80
vxlan_xmit_one+0x139e/0x2ef0
vxlan_xmit+0x1867/0x2760
dev_hard_start_xmit+0x1ee/0x4f0
br_dev_queue_push_xmit+0x4d1/0x660
[..]
ip_compute_csum() cannot deal with nonlinear skbs, so avoid it.
After this change, splat is gone and iperf3 is no longer stuck. |
| dr_libs dr_wav.h version 0.14.4 and earlier (fixed in commit 8a7258c) contain a heap buffer overflow vulnerability in the drwav__read_smpl_to_metadata_obj() function of dr_wav.h that allows memory corruption via crafted WAV files. Attackers can exploit a mismatch between sampleLoopCount validation in pass 1 and unconditional processing in pass 2 to overflow heap allocations with 36 bytes of attacker-controlled data through any drwav_init_*_with_metadata() call on untrusted input. |
| Golioth Pouch version 0.1.0, prior to commit 1b2219a1, contains a heap-based buffer overflow in BLE GATT server certificate handling. server_cert_write() allocates a heap buffer of size CONFIG_POUCH_SERVER_CERT_MAX_LEN when receiving the first fragment, then appends subsequent fragments using memcpy() without verifying that sufficient capacity remains. An adjacent BLE client can send unauthenticated fragments whose combined size exceeds the allocated buffer, causing a heap overflow and crash; integrity impact is also possible due to memory corruption. |
