Export limit exceeded: 348912 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (348912 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31748 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: comedi: me_daq: Fix potential overrun of firmware buffer `me2600_xilinx_download()` loads the firmware that was requested by `request_firmware()`. It is possible for it to overrun the source buffer because it blindly trusts the file format. It reads a data stream length from the first 4 bytes into variable `file_length` and reads the data stream contents of length `file_length` from offset 16 onwards. Although it checks that the supplied firmware is at least 16 bytes long, it does not check that it is long enough to contain the data stream. Add a test to ensure that the supplied firmware is long enough to contain the header and the data stream. On failure, log an error and return `-EINVAL`. | ||||
| CVE-2026-31445 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: avoid use of half-online-committed context One major usage of damon_call() is online DAMON parameters update. It is done by calling damon_commit_ctx() inside the damon_call() callback function. damon_commit_ctx() can fail for two reasons: 1) invalid parameters and 2) internal memory allocation failures. In case of failures, the damon_ctx that attempted to be updated (commit destination) can be partially updated (or, corrupted from a perspective), and therefore shouldn't be used anymore. The function only ensures the damon_ctx object can safely deallocated using damon_destroy_ctx(). The API callers are, however, calling damon_commit_ctx() only after asserting the parameters are valid, to avoid damon_commit_ctx() fails due to invalid input parameters. But it can still theoretically fail if the internal memory allocation fails. In the case, DAMON may run with the partially updated damon_ctx. This can result in unexpected behaviors including even NULL pointer dereference in case of damos_commit_dests() failure [1]. Such allocation failure is arguably too small to fail, so the real world impact would be rare. But, given the bad consequence, this needs to be fixed. Avoid such partially-committed (maybe-corrupted) damon_ctx use by saving the damon_commit_ctx() failure on the damon_ctx object. For this, introduce damon_ctx->maybe_corrupted field. damon_commit_ctx() sets it when it is failed. kdamond_call() checks if the field is set after each damon_call_control->fn() is executed. If it is set, ignore remaining callback requests and return. All kdamond_call() callers including kdamond_fn() also check the maybe_corrupted field right after kdamond_call() invocations. If the field is set, break the kdamond_fn() main loop so that DAMON sill doesn't use the context that might be corrupted. [sj@kernel.org: let kdamond_call() with cancel regardless of maybe_corrupted] | ||||
| CVE-2026-31446 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free in update_super_work when racing with umount Commit b98535d09179 ("ext4: fix bug_on in start_this_handle during umount filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups reads during unmount. However, this introduced a use-after-free because update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which accesses the kobject's kernfs_node after it has been freed by kobject_del() in ext4_unregister_sysfs(): update_super_work ext4_put_super ----------------- -------------- ext4_unregister_sysfs(sb) kobject_del(&sbi->s_kobj) __kobject_del() sysfs_remove_dir() kobj->sd = NULL sysfs_put(sd) kernfs_put() // RCU free ext4_notify_error_sysfs(sbi) sysfs_notify(&sbi->s_kobj) kn = kobj->sd // stale pointer kernfs_get(kn) // UAF on freed kernfs_node ext4_journal_destroy() flush_work(&sbi->s_sb_upd_work) Instead of reordering the teardown sequence, fix this by making ext4_notify_error_sysfs() detect that sysfs has already been torn down by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call in that case. A dedicated mutex (s_error_notify_mutex) serializes ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs() to prevent TOCTOU races where the kobject could be deleted between the state_in_sysfs check and the sysfs_notify() call. | ||||
| CVE-2026-31447 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: reject mount if bigalloc with s_first_data_block != 0 bigalloc with s_first_data_block != 0 is not supported, reject mounting it. | ||||
| CVE-2026-6973 | 1 Ivanti | 1 Endpoint Manager Mobile | 2026-05-07 | 7.2 High |
| An Improper Input Validation in Ivanti EPMM before versions 12.6.1.1, 12.7.0.1, and 12.8.0.1 allows a remotely authenticated user with administrative access to achieve remote code execution. | ||||
| CVE-2026-31749 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: ni_atmio16d: Fix invalid clean-up after failed attach If the driver's COMEDI "attach" handler function (`atmio16d_attach()`) returns an error, the COMEDI core will call the driver's "detach" handler function (`atmio16d_detach()`) to clean up. This calls `reset_atmio16d()` unconditionally, but depending on where the error occurred in the attach handler, the device may not have been sufficiently initialized to call `reset_atmio16d()`. It uses `dev->iobase` as the I/O port base address and `dev->private` as the pointer to the COMEDI device's private data structure. `dev->iobase` may still be set to its initial value of 0, which would result in undesired writes to low I/O port addresses. `dev->private` may still be `NULL`, which would result in null pointer dereferences. Fix `atmio16d_detach()` by checking that `dev->private` is valid (non-null) before calling `reset_atmio16d()`. This implies that `dev->iobase` was set correctly since that is set up before `dev->private`. | ||||
| CVE-2026-31750 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: runflags cannot determine whether to reclaim chanlist syzbot reported a memory leak [1], because commit 4e1da516debb ("comedi: Add reference counting for Comedi command handling") did not consider the exceptional exit case in do_cmd_ioctl() where runflags is not set. This caused chanlist not to be properly freed by do_become_nonbusy(), as it only frees chanlist when runflags is correctly set. Added a check in do_become_nonbusy() for the case where runflags is not set, to properly free the chanlist memory. [1] BUG: memory leak backtrace (crc 844a0efa): __comedi_get_user_chanlist drivers/comedi/comedi_fops.c:1815 [inline] do_cmd_ioctl.part.0+0x112/0x350 drivers/comedi/comedi_fops.c:1890 do_cmd_ioctl drivers/comedi/comedi_fops.c:1858 [inline] | ||||
| CVE-2026-31751 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: dt2815: add hardware detection to prevent crash The dt2815 driver crashes when attached to I/O ports without actual hardware present. This occurs because syzkaller or users can attach the driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl. When no hardware exists at the specified port, inb() operations return 0xff (floating bus), but outb() operations can trigger page faults due to undefined behavior, especially under race conditions: BUG: unable to handle page fault for address: 000000007fffff90 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page RIP: 0010:dt2815_attach+0x6e0/0x1110 Add hardware detection by reading the status register before attempting any write operations. If the read returns 0xff, assume no hardware is present and fail the attach with -ENODEV. This prevents crashes from outb() operations on non-existent hardware. | ||||
| CVE-2026-31752 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bridge: br_nd_send: validate ND option lengths br_nd_send() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address. | ||||
| CVE-2026-43048 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: Mitigate potential OOB by removing bogus memset() The memset() in hid_report_raw_event() has the good intention of clearing out bogus data by zeroing the area from the end of the incoming data string to the assumed end of the buffer. However, as we have previously seen, doing so can easily result in OOB reads and writes in the subsequent thread of execution. The current suggestion from one of the HID maintainers is to remove the memset() and simply return if the incoming event buffer size is not large enough to fill the associated report. Suggested-by Benjamin Tissoires <bentiss@kernel.org> [bentiss: changed the return value] | ||||
| CVE-2026-43049 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure Presently, if the force feedback initialisation fails when probing the Logitech G920 Driving Force Racing Wheel for Xbox One, an error number will be returned and propagated before the userspace infrastructure (sysfs and /dev/input) has been torn down. If userspace ignores the errors and continues to use its references to these dangling entities, a UAF will promptly follow. We have 2 options; continue to return the error, but ensure that all of the infrastructure is torn down accordingly or continue to treat this condition as a warning by emitting the message but returning success. It is thought that the original author's intention was to emit the warning but keep the device functional, less the force feedback feature, so let's go with that. | ||||
| CVE-2026-43056 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: fix use-after-free in add_adev() error path If auxiliary_device_add() fails, add_adev() jumps to add_fail and calls auxiliary_device_uninit(adev). The auxiliary device has its release callback set to adev_release(), which frees the containing struct mana_adev. Since adev is embedded in struct mana_adev, the subsequent fall-through to init_fail and access to adev->id may result in a use-after-free. Fix this by saving the allocated auxiliary device id in a local variable before calling auxiliary_device_add(), and use that saved id in the cleanup path after auxiliary_device_uninit(). | ||||
| CVE-2026-8087 | 1 Osgeo | 1 Gdal | 2026-05-07 | 5.3 Medium |
| A security flaw has been discovered in OSGeo gdal up to 3.13.0dev-4. Impacted is the function GDnentries of the file frmts/hdf4/hdf-eos/GDapi.c. Performing a manipulation of the argument DataFieldName results in heap-based buffer overflow. The attack must be initiated from a local position. The exploit has been released to the public and may be used for attacks. Upgrading to version 3.13.0RC1 is recommended to address this issue. The patch is named 184f77dbcc74118c062c05e464c88161d3c37b9b. You should upgrade the affected component. | ||||
| CVE-2026-36387 | 1 Codeastro | 1 Membership Management System | 2026-05-07 | 6.5 Medium |
| A Remote Code Execution vulnerability was found in CODEASTRO Membership Management System v1.0 in /add_members.php. This vulnerability affects the file upload functionality, where improper file sanitization allows attackers to inject malicious files which leads RCE. | ||||
| CVE-2026-31739 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: tegra - Add missing CRYPTO_ALG_ASYNC The tegra crypto driver failed to set the CRYPTO_ALG_ASYNC on its asynchronous algorithms, causing the crypto API to select them for users that request only synchronous algorithms. This causes crashes (at least). Fix this by adding the flag like what the other drivers do. Also remove the unnecessary CRYPTO_ALG_TYPE_* flags, since those just get ignored and overridden by the registration function anyway. | ||||
| CVE-2026-43055 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: file: Use kzalloc_flex for aio_cmd The target_core_file doesn't initialize the aio_cmd->iocb for the ki_write_stream. When a write command fd_execute_rw_aio() is executed, we may get a bogus ki_write_stream value, causing unintended write failure status when checking iocb->ki_write_stream > max_write_streams in the block device. Let's just use kzalloc_flex when allocating the aio_cmd and let ki_write_stream=0 to fix this issue. | ||||
| CVE-2026-31738 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: validate ND option lengths in vxlan_na_create vxlan_na_create() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address. | ||||
| CVE-2026-29969 | 2 Cmoncrook, Workflowfirst | 2 Staffwiki, Staffwiki | 2026-05-07 | 6.1 Medium |
| A cross-site scripting (XSS) vulnerability in the wff_cols_pref.css.aspx endpoint of staffwiki v7.0.1.19219 allows attackers to execute arbitrary Javascript in the context of the user's browser via a crafted HTTP request. | ||||
| CVE-2025-65857 | 1 Xiongmaitech | 2 Xm530v200 X6-weq 8m, Xm530v200 X6-weq 8m Firmware | 2026-05-07 | 7.5 High |
| An issue was discovered in Xiongmai XM530 IP cameras on firmware V5.00.R02.000807D8.10010.346624.S.ONVIF 21.06. The GetStreamUri exposes RTSP URIs containing hardcoded credentials enabling direct unauthorized video stream access. | ||||
| CVE-2025-70025 | 2 Benkeen, Generatedata | 2 Generatedata, Generatedata | 2026-05-07 | 6.1 Medium |
| An issue pertaining to CWE-79: Improper Neutralization of Input During Web Page Generation was discovered in benkeen generatedata 4.0.14. | ||||