| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: diag: reject stale associations in dump_one path
The SCTP exact sock_diag lookup can hold a transport reference, block on
lock_sock(sk), and then resume after sctp_association_free() has marked
the association dead and freed its bind address list.
When that happens, inet_assoc_attr_size() and
inet_diag_msg_sctpasoc_fill() can still dereference association state
that is no longer valid for reporting. In particular,
inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as a
real sctp_sockaddr_entry and trigger an out-of-bounds read from
unrelated association memory.
Reject the association after taking the socket lock if it has been
reaped or detached from the endpoint, and report the lookup as stale.
This keeps the exact dump-one path from formatting torn association
state. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_hbh: reject oversized option lists
struct ip6t_opts stores at most IP6T_OPTS_OPTSNR option descriptors,
but hbh_mt6_check() does not reject larger optsnr values supplied from
userspace.
Validate optsnr in the rule setup path so only match data that fits the
fixed-size opts array can be installed. This follows the existing xtables
pattern of rejecting invalid user-provided counts in checkentry() and
keeps the packet matching path unchanged.
`struct ip6t_opts` has a fixed `opts[IP6T_OPTS_OPTSNR]` array,
where `IP6T_OPTS_OPTSNR` is 16, then off-by-one array access is possible:
[ 137.924693][ T8692] UBSAN: array-index-out-of-bounds in ../net/ipv6/netfilter/ip6t_hbh.c:110:29
[ 137.926167][ T8692] index 16 is out of range for type '__u16 [16]' |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: fix fragment reassembly length accounting
batman-adv keeps a running payload length for queued fragments and uses it
to validate a fragment chain before reassembly.
That accounting currently allows the accumulated fragment length to be
truncated during updates. As a result, malformed fragment chains can
bypass the intended validation and drive reassembly with inconsistent
length state, leading to a local denial of service.
Fix the accounting by storing the accumulated length in a length-typed
field and rejecting update overflows before the existing validation logic
runs.
The fix was verified against the original reproducer and against valid
fragment reassembly paths. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: v: stop OGMv2 on disabled interface
When a batadv_hard_iface is disabled, its mesh_iface pointer is set to
NULL. However, batadv_v_ogm_send_meshif() may still dispatch OGMs via
batadv_v_ogm_queue_on_if() for interfaces that have since lost their
mesh_iface association. This results in a NULL pointer dereference when
batadv_v_ogm_queue_on_if() unconditionally calls netdev_priv() on the
now NULL hard_iface->mesh_iface to retrieve the batadv_priv.
It is necessary to ensure that the batadv_v_ogm_queue_on_if() checks that
it is using the same mesh_iface for which batadv_v_ogm_send_meshif() was
called. |
| The Infility Global WordPress plugin before 2.15.19 does not properly sanitize and escape some parameters before using them in SQL statements, leading to a SQL Injection vulnerability exploitable by authenticated users with Subscriber-level access and above. |
| The RentMy Real-Time Rental Management Plugin plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 4.0.4.1. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to read, create, update, and delete event records stored in the rentmy_events WordPress option, as well as overwrite the rentmy_locationId option. |
| The Bulk SEO Image plugin for WordPress is vulnerable to Cross-Site Request Forgery in versions up to and including 1.1. This is due to missing or incorrect nonce validation on the plugin's settings page handler BulkSeoImage(), which dispatches to launchbulk() / BulkSeoImageGo() whenever the request contains $_POST['bulkseoimage']. No wp_nonce_field() is emitted in the form and no check_admin_referer()/wp_verify_nonce() is performed before bulk-overwriting the _wp_attachment_image_alt post meta for every image attached to every published post and/or page. This makes it possible for unauthenticated attackers to bulk-overwrite image ALT-text metadata across the site via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| The Image Sizes on Demand plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via PHP_SELF Server Variable in all versions up to, and including, 1.3 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. The injected payload only executes in the context of an administrator, as the settings page requires the manage_options capability to render. |
| The Avalon23 Products Filter for WooCommerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'avalon23_qr' shortcode in all versions up to, and including, 1.1.6. This is due to insufficient input sanitization and output escaping on user-supplied shortcode attributes (notably 'title' and 'fixed_link') which are concatenated directly into single-quoted HTML attributes by the AVALON23_HELPER::draw_html_item() helper without esc_attr() or any other encoding. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The MIR blocks and shortcodes plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'title' attribute (and other attributes such as 'ready_animation_text') of the 'msc_stats' shortcode in versions up to, and including, 1.0.0. This is due to insufficient input sanitization and output escaping on user supplied shortcode attributes inside the msc_stats() rendering function. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The 24liveblog - live blog tool plugin for WordPress is vulnerable to Exposure of Sensitive Information in versions up to, and including, 2.2. This is due to the lb24_block_enqueue_scripts() function being hooked to enqueue_block_editor_assets and, for any non-administrator user, falling back to loading the administrator-configured site-wide 24liveblog integration secrets (lb24_token, lb24_refresh_token, lb24_uid, lb24_uname) from the options table via get_option() and emitting them through wp_localize_script() as the lb24BlockData JavaScript object. This makes it possible for authenticated attackers, with contributor-level access and above, to extract third-party 24liveblog account credentials (including the API token and refresh token) by simply opening the block editor and inspecting the page source. |
| The Invoice Generator plugin for WordPress is vulnerable to Account Takeover via Password Reset in all versions up to, and including, 1.0.0. This is due to the `pravel_invoice_change_password()` function being registered as a nopriv AJAX handler with no nonce verification and no authorization check, and performing a loose equality comparison between the supplied `reset_activation_code` POST parameter and the target user's stored `forgot_email` user meta — a check that trivially evaluates to true (`'' == ''`) for any user who has never initiated a forgot-password request, which applies to administrators under normal conditions. This makes it possible for unauthenticated attackers to supply an arbitrary user ID via the `reset_user_id` POST parameter, bypass the activation code check entirely by omitting `reset_activation_code`, and set the target account's password to an attacker-chosen value, enabling full takeover of any account on the site, including administrator accounts. |
| The SignUp & SignIn plugin for WordPress is vulnerable to Authentication Bypass via Weak Password Reset Validation leading to Account Takeover in versions up to, and including, 1.0.0. This is due to the `pravel_change_password()` AJAX handler — registered via `wp_ajax_nopriv_pravel_change_password` and therefore accessible to unauthenticated users — performing no nonce verification, no capability check, and only a loose equality check between an attacker-supplied `reset_activation_code` POST parameter and the target user's `forgot_email` user meta value; when a user has never initiated a password reset, `get_user_meta()` returns an empty string that trivially satisfies this check against an omitted or empty attacker-supplied code. This makes it possible for unauthenticated attackers to change the password of any WordPress user, including administrators, by sending a crafted POST request to `admin-ajax.php` with `action=pravel_change_password`, `reset_user_id` set to the target account's user ID, and `new_password_custom` set to an attacker-chosen password. Successful exploitation allows the attacker to authenticate with the newly set password and fully take over the targeted account, achieving administrator-level privilege escalation on the affected site. |
| The Generate Security.txt plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 1.0.12. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to delete the site's security.txt file from the server filesystem or create the .well-known directory by directly invoking the delete_securitytxt or create_wellknown_folder AJAX actions. |
| The SearchPlus plugin for WordPress is vulnerable to unauthorized modification and deletion of data in versions up to, and including, 1.7.1. This is due to a missing capability check and missing nonce validation on the searchplus_save_token_action_callback() and searchplus_reset_token_action_callback() functions, both of which are exposed to unauthenticated users through the wp_ajax_nopriv_ hooks. This makes it possible for unauthenticated attackers to overwrite or delete the plugin's stored account token and account name options (dym_token, dym_name, searchplus_token, searchplus_name, sp_token, sp_name). |
| The 24liveblog - live blog tool plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the update_lb24_token() AJAX function in versions up to, and including, 2.2. The handler only verifies the 'lb24' nonce (which is generated and localized to any user with block editor access via lb24_block_enqueue_scripts()) and does not verify the user's capabilities or that the supplied user_id belongs to the current user. This makes it possible for authenticated attackers, with author-level access and above, to overwrite the lb24_token, lb24_uid, lb24_refresh_token, and lb24_uname user meta values of any user (including administrators) as well as the corresponding site-wide options, effectively hijacking the plugin's integration with the 24liveblog service. |
| The EntreDroppers plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via PHP_SELF Parameter in all versions up to, and including, 1.1.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. The payload is delivered via attacker-controlled path-info in the URL (e.g., /wp-admin/admin.php/"><script>alert(0)</script>/?page=EntreDroppers.php), which PHP_SELF reflects directly into the form action attribute. |
| The Kargo Takip plugin for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 1.2 via the 'api_url' parameter. This makes it possible for unauthenticated attackers to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services. The script echoes internal API response data (specifically the value of any 'auth' key in a JSON response body) verbatim back to the attacker's browser, enabling direct exfiltration of responses from internal services such as cloud instance metadata endpoints. |
| The Blue Captcha plugin for WordPress is vulnerable to Cross-Site Request Forgery in versions up to and including 2.0.1. This is due to missing or incorrect nonce validation on the main admin panel (blcap_main_page) and on the Hall of Shame and Log subpages, which accept a 'blcap_action' / 'action' parameter from $_REQUEST and perform destructive operations (plugin uninstall via blcap_uninstall(), log deletion via blcap_delete_logs(), Hall of Shame deletion via blcap_delete_ip_db(), and adding IPs to the banned list via update_option('blcap_settings')) with no wp_verify_nonce(), check_admin_referer(), or check_ajax_referer() calls anywhere in the codebase. This makes it possible for unauthenticated attackers to uninstall the plugin, delete audit logs, remove Hall of Shame entries, and add arbitrary IP addresses to the block list via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| The Secufor_OAuth plugin for WordPress is vulnerable to unauthorized access in all versions up to, and including, 1.0.7. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to disconnect the WordPress site from its linked Secufor account by clearing the plugin's stored login token and user login configuration. |
