Export limit exceeded: 361169 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 361169 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (361169 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53148 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Clamp XDomain response data copy to allocation size tb_xdp_properties_request() derives the per-packet copy length from the response header without checking that it fits in the previously allocated data buffer. A malicious peer can set its length field larger than the declared data_length, causing memcpy to write past the kcalloc allocation. Clamp the per-packet copy length so that the cumulative offset never exceeds data_len. | ||||
| CVE-2026-53173 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix OOB write in ethosu_gem_cmdstream_copy_and_validate() The command stream parsing loop increments the index variable a second time when a 64-bit command word is encountered (bit 14 set), but does not re-check the loop bound before writing the second word: for (i = 0; i < size / 4; i++) { bocmds[i] = cmds[0]; if (cmd & 0x4000) { i++; bocmds[i] = cmds[1]; /* unchecked */ } } The buffer bocmds is backed by a DMA allocation of exactly size bytes from drm_gem_dma_create(ddev, size), giving valid indices [0, size/4-1]. When i == size/4 - 1 on entry to an iteration and bit 14 of cmds[0] is set, bocmds[size/4-1] is written in bounds, i is then incremented to size/4, and bocmds[size/4] writes four bytes past the end of the allocation. Userspace controls both the buffer contents and the size argument via the ioctl, making this a userspace-triggerable heap out-of-bounds write. Fix by checking the incremented index against the buffer bound before the second write and returning -EINVAL if the buffer is too small to contain the extended command. | ||||
| CVE-2026-53176 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN In drivers/infiniband/ulp/isert/ib_isert.c, isert_login_recv_done() computes the login request payload length as wc->byte_len minus ISER_HEADERS_LEN with no lower bound, and login_req_len is a signed int. A remote iSER initiator can post a login Send work request carrying fewer than ISER_HEADERS_LEN (76) bytes, so the subtraction underflows and login_req_len becomes negative. isert_rx_login_req() then reads that negative length back into a signed int, takes size = min(rx_buflen, MAX_KEY_VALUE_PAIRS), and because the min() is signed it keeps the negative value; the value is then passed as the memcpy() length and sign-extended to a multi-gigabyte size_t. The copy into the 8192-byte login->req_buf runs far out of bounds and faults, crashing the target node. The login phase precedes iSCSI authentication, so no credentials are required to reach this path. Reject any login PDU shorter than ISER_HEADERS_LEN before the subtraction, mirroring the existing early return on a failed work completion, so login_req_len can never go negative. The upper bound was already safe: a posted login buffer cannot deliver more than ISER_RX_PAYLOAD_SIZE, so the difference stays at or below MAX_KEY_VALUE_PAIRS and the existing min() clamps it; only the missing lower bound needs to be added. | ||||
| CVE-2026-52955 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in crush_decode() A message of type CEPH_MSG_OSD_MAP containing a crush map with at least one bucket has two fields holding the bucket algorithm. If the values in these two fields differ, an out-of-bounds access can occur. This is the case because the first algorithm field (alg) is used to allocate the correct amount of memory for a bucket of this type, while the second algorithm field inside the bucket (b->alg) is used in the subsequent processing. This patch fixes the issue by adding a check that compares alg and b->alg and aborts the processing in case they differ. Furthermore, b->alg is set to 0 in this case, because the destruction of the crush map also uses this field to determine the bucket type, which can again result in an out-of-bounds access when trying to free the memory pointed to by the fields of the bucket. To correctly free the memory allocated for the bucket in such a case, the corresponding call to kfree is moved from the algorithm-specific crush_destroy_bucket functions to the generic crush_destroy_bucket(). | ||||
| CVE-2026-52960 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: put folios not suitable for writeback The batch holds references to the folios (see `filemap_get_folios`, `folio_batch_release`), so we need to `folio_put` the folios we remove. Tested on v6.18. | ||||
| CVE-2026-52966 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm: Replace old pointer to new idr Commit 5e28b7b94408 introduced a logical error by failing to replace the newly generated IDR pointer to old id's pointer at the correct location within the "change handle" logic; this resulted in the issue reported by syzbot [1]. Specifically, the new IDR object pointer is intended to replace the original id's pointer during the normal execution flow. Additionally, an unnecessary conditional check for the ret exit path has been removed. [1] !RB_EMPTY_ROOT(&prime_fpriv->dmabufs) WARNING: drivers/gpu/drm/drm_prime.c:224 at drm_prime_destroy_file_private+0x48/0x60 drivers/gpu/drm/drm_prime.c:224, CPU#0: syz.0.17/5833 Call Trace: drm_file_free.part.0+0x7e6/0xcc0 drivers/gpu/drm/drm_file.c:269 drm_file_free drivers/gpu/drm/drm_file.c:237 [inline] drm_close_helper.isra.0+0x186/0x200 drivers/gpu/drm/drm_file.c:290 drm_release+0x1ab/0x360 drivers/gpu/drm/drm_file.c:438 | ||||
| CVE-2026-52967 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: fix possible infinite loop and oob read in symlink_data() On 32-bit architectures, the infinite loop is as follows: len = p->ErrorDataLength == 0xfffffff8 u8 *next = p->ErrorContextData + len next == p On 32-bit architectures, the out-of-bounds read is as follows: len = p->ErrorDataLength == 0xfffffff0 u8 *next = p->ErrorContextData + len next == (u8 *)p - 8 | ||||
| CVE-2026-52969 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: Reject wrapped offset in kvm_reset_dirty_gfn() kvm_reset_dirty_gfn() guards the gfn range with if (!memslot || (offset + __fls(mask)) >= memslot->npages) return; but offset is u64 and the addition is unchecked. The check can be silently bypassed by a u64 wrap. The dirty ring backing those entries is MAP_SHARED at KVM_DIRTY_LOG_PAGE_OFFSET of the vcpu fd, so the VMM can rewrite the slot and offset fields of any entry between when the kernel pushes them and when KVM_RESET_DIRTY_RINGS consumes them. On reset, kvm_dirty_ring_reset() re-reads the values via READ_ONCE() and feeds them straight back into this check; only the flags handshake is treated as the handover, the slot/offset payload is taken on trust. Crafting two entries entry[i].offset = 0xffffffffffffffc1 entry[i+1].offset = 0 makes the coalescing loop in kvm_dirty_ring_reset() compute delta = (s64)(0 - 0xffffffffffffffc1) = 63 which falls in [0, BITS_PER_LONG), so it folds entry[i+1] into the existing mask by setting bit 63. The trailing kvm_reset_dirty_gfn() call then sees offset = 0xffffffffffffffc1 and __fls(mask) = 63; the sum is 0 in u64 and the bounds check passes. That offset propagates into kvm_arch_mmu_enable_log_dirty_pt_masked() unchanged. On the legacy MMU path -- kvm_memslots_have_rmaps() == true, i.e. shadow paging, any VM that has allocated shadow roots, or a write-tracked slot -- it reaches gfn_to_rmap(), which indexes slot->arch.rmap[0][] with a near-U64_MAX gfn. That is an out-of-bounds load of a kvm_rmap_head, followed by a conditional clear of PT_WRITABLE_MASK in whatever the loaded pointer points at. The path is reachable from any process holding /dev/kvm. Range-check offset on its own first, so the addition cannot wrap. memslot->npages is bounded well below U64_MAX, so once offset < npages holds, offset + __fls(mask) (with __fls(mask) < BITS_PER_LONG) stays in range. | ||||
| CVE-2026-52971 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ena: PHC: Fix potential use-after-free in get_timestamp Move the phc->active check and resp pointer assignment to after acquiring the spinlock. Previously, phc->active was checked without holding the lock, and resp was cached from ena_dev->phc.virt_addr before the lock was acquired. If ena_com_phc_destroy() runs between the lockless active check and the lock acquisition, it sets active=false, releases the lock, frees the DMA memory, and sets virt_addr=NULL. The get_timestamp path would then read a NULL virt_addr and dereference it. With both the active check and the pointer read under the lock, destroy cannot free the memory while get_timestamp is using it. | ||||
| CVE-2026-52976 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl() Two error handling issues exist in xe_exec_queue_create_ioctl(): 1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in preempt fence mode, xe_vm_add_compute_exec_queue() has already added the queue to the VM's compute exec queue list. Skipping the kill leaves the queue on that list, leading to a dangling pointer after the queue is freed. 2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has succeeded, the error path does not call xe_hw_engine_group_del_exec_queue() to remove the queue from the hw engine group list. The queue is then freed while still linked into the hw engine group, causing a use-after-free. Fix both by: - Changing the xe_hw_engine_group_add_exec_queue() failure path to jump to kill_exec_queue so that xe_exec_queue_kill() properly removes the queue from the VM's compute list. - Adding a del_hw_engine_group label before kill_exec_queue for the xa_alloc() failure path, which removes the queue from the hw engine group before proceeding with the rest of the cleanup. (cherry picked from commit 37c831f401746a45d510b312b0ed7a77b1e06ec8) | ||||
| CVE-2026-52986 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: don't use simple_strtoul Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(), and ct_sip_parse_request() with a new sip_parse_port() helper that validates each digit against the buffer limit, eliminating the use of simple_strtoul() which assumes NUL-terminated strings. The previous code dereferenced pointers without bounds checks after sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated skb data. A port that reaches the buffer limit without a trailing character is also rejected as malformed. Also get rid of all simple_strtoul() usage in conntrack, prefer a stricter version instead. There are intentional changes: - Bail out if number is > UINT_MAX and indicate a failure, same for too long sequences. While we do accept 05535 as port 5535, we will not accept e.g. 'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261, we should restrict this to not waste cycles when presented with malformed packets with 64k '0' characters. - Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch 'expire=' and 'rports='; both are expected to use base-10. - In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k range. - epaddr_len now returns 0 if the port is invalid, as it already does for invalid ip addresses. This is intentional. nf_conntrack_sip performs lots of guesswork to find the right parts of the message to parse. Being stricter could break existing setups. Connection tracking helpers are designed to allow traffic to pass, not to block it. Based on an earlier patch from Jenny Guanni Qu <qguanni@gmail.com>. | ||||
| CVE-2026-52993 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix double-free in tipc_buf_append() tipc_msg_validate() can potentially reallocate the skb it is validating, freeing the old one. In tipc_buf_append(), it was being called with a pointer to a local variable which was a copy of the caller's skb pointer. If the skb was reallocated and validation subsequently failed, the error handling path would free the original skb pointer, which had already been freed, leading to double-free. Fix this by checking if head now points to a newly allocated reassembled skb. If it does, reassign *headbuf for later freeing operations. | ||||
| CVE-2026-52994 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting virtio_transport_init_zcopy_skb() uses iter->count as the size argument for msg_zerocopy_realloc(), which in turn passes it to mm_account_pinned_pages() for RLIMIT_MEMLOCK accounting. However, this function is called after virtio_transport_fill_skb() has already consumed the iterator via __zerocopy_sg_from_iter(), so on the last skb, iter->count will be 0, skipping the RLIMIT_MEMLOCK enforcement. Pass pkt_len (the total bytes being sent) as an explicit parameter to virtio_transport_init_zcopy_skb() instead of reading the already-consumed iter->count. This matches TCP and UDP, which both call msg_zerocopy_realloc() with the original message size. | ||||
| CVE-2026-53001 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xtables: restrict several matches to inet family This is a partial revert of: commit ab4f21e6fb1c ("netfilter: xtables: use NFPROTO_UNSPEC in more extensions") to allow ipv4 and ipv6 only. - xt_mac - xt_owner - xt_physdev These extensions are not used by ebtables in userspace. Moreover, xt_realm is only for ipv4, since dst->tclassid is ipv4 specific. | ||||
| CVE-2026-53004 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix OOB write to userspace in sctp_getsockopt_peer_auth_chunks sctp_getsockopt_peer_auth_chunks() checks that the caller's optval buffer is large enough for the peer AUTH chunk list with if (len < num_chunks) return -EINVAL; but then writes num_chunks bytes to p->gauth_chunks, which lives at offset offsetof(struct sctp_authchunks, gauth_chunks) == 8 inside optval. The check is missing the sizeof(struct sctp_authchunks) = 8-byte header. When the caller supplies len == num_chunks (for any num_chunks > 0) the test passes but copy_to_user() writes sizeof(struct sctp_authchunks) = 8 bytes past the declared buffer. The sibling function sctp_getsockopt_local_auth_chunks() at the next line already has the correct check: if (len < sizeof(struct sctp_authchunks) + num_chunks) return -EINVAL; Align the peer variant with its sibling. Reproducer confirms on v7.0-13-generic: an unprivileged userspace caller that opens a loopback SCTP association with AUTH enabled, queries num_chunks with a short optval, then issues the real getsockopt with len == num_chunks and sentinel bytes painted past the buffer observes those sentinel bytes overwritten with the peer's AUTH chunk type. The bytes written are under the peer's control but land in the caller's own userspace; this is not a kernel memory corruption, but it is a kernel-side contract violation that can silently corrupt adjacent userspace data. | ||||
| CVE-2026-53058 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: cadence: cdns-mhdp8546-core: Set the mhdp connector earlier in atomic_enable() In case if we get errors in cdns_mhdp_link_up() or cdns_mhdp_reg_read() in atomic_enable, we will go to cdns_mhdp_modeset_retry_fn() and will hit NULL pointer while trying to access the mutex. We need the connector to be set before that. Unlike in legacy cases with flag !DRM_BRIDGE_ATTACH_NO_CONNECTOR, we do not have connector initialised in bridge_attach(), so add the mhdp->connector_ptr in device structure to handle both cases with DRM_BRIDGE_ATTACH_NO_CONNECTOR and !DRM_BRIDGE_ATTACH_NO_CONNECTOR, set it in atomic_enable() earlier to avoid possible NULL pointer dereference in recovery paths like modeset_retry_fn() with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set. | ||||
| CVE-2026-53061 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm cache: fix dirty mapping checking in passthrough mode switching As mentioned in commit 9b1cc9f251af ("dm cache: share cache-metadata object across inactive and active DM tables"), dm-cache assumed table reload occurs after suspension, while LVM's table preload breaks this assumption. The dirty mapping check for passthrough mode was designed around this assumption and is performed during table creation, causing the check to fail with preload while metadata updates are ongoing. This risks loading dirty mappings into passthrough mode, resulting in data loss. Reproduce steps: 1. Create a writeback cache with zero migration_threshold to produce dirty mappings dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 262144 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writeback smq \ 2 migration_threshold 0" 2. Preload a table in passthrough mode dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0" 3. Write to the first cache block to make it dirty fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \ --direct=1 --size=64k 4. Resume the inactive table. Now it's possible to load the dirty block into passthrough mode. dmsetup resume cache Fix by moving the checks to the preresume phase to support table preloading. Also remove the unused function dm_cache_metadata_all_clean. | ||||
| CVE-2026-53062 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm cache policy smq: fix missing locks in invalidating cache blocks In passthrough mode, the policy invalidate_mapping operation is called simultaneously from multiple workers, thus it should be protected by a lock. Otherwise, we might end up with data races on the allocated blocks counter, or even use-after-free issues with internal data structures when doing concurrent writes. Note that the existing FIXME in smq_invalidate_mapping() doesn't affect passthrough mode since migration tasks don't exist there, but would need attention if supporting fast device shrinking via suspend/resume without target reloading. Reproduce steps: 1. Create a cache device consisting of 1024 cache entries dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 262144 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. Populate the cache, and record the number of cached blocks fio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \ --size=64m --direct=1 nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}') 3. Reload the cache into passthrough mode dmsetup suspend cache dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0" dmsetup resume cache 4. Write to the passthrough cache. By setting multiple jobs with I/O size equal to the cache block size, cache blocks are invalidated concurrently from different workers. fio --filename=/dev/mapper/cache --name=test --rw=randwrite --bs=64k \ --direct=1 --numjobs=2 --randrepeat=0 --size=64m 5. Check if demoted matches cached block count. These numbers should match but may differ due to the data race. nr_demoted=$(dmsetup status cache | awk '{print $12}') echo "$nr_cached, $nr_demoted" | ||||
| CVE-2026-6325 | 1 Wolfssl | 1 Wolfssl | 2026-06-26 | N/A |
| Out-of-bounds write in SetSuitesHashSigAlgo when processing an oversized signature algorithms list, allowing a write past the bounds of the destination buffer. | ||||
| CVE-2024-4029 | 1 Redhat | 7 Build Keycloak, Jboss Data Grid, Jboss Enterprise Application Platform and 4 more | 2026-06-26 | 4.1 Medium |
| A vulnerability was found in Wildfly’s management interface. Due to the lack of limitation of sockets for the management interface, it may be possible to cause a denial of service hitting the nofile limit as there is no possibility to configure or set a maximum number of connections. | ||||