| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: avoid dereferencing log items after push callbacks
After xfsaild_push_item() calls iop_push(), the log item may have been
freed if the AIL lock was dropped during the push. Background inode
reclaim or the dquot shrinker can free the log item while the AIL lock
is not held, and the tracepoints in the switch statement dereference
the log item after iop_push() returns.
Fix this by capturing the log item type, flags, and LSN before calling
xfsaild_push_item(), and introducing a new xfs_ail_push_class trace
event class that takes these pre-captured values and the ailp pointer
instead of the log item pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: stop reclaim before pushing AIL during unmount
The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while
background reclaim and inodegc are still running. This is broken
independently of any use-after-free issues - background reclaim and
inodegc should not be running while the AIL is being pushed during
unmount, as inodegc can dirty and insert inodes into the AIL during the
flush, and background reclaim can race to abort and free dirty inodes.
Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background
reclaim before pushing the AIL. Stop inodegc before cancelling
m_reclaim_work because the inodegc worker can re-queue m_reclaim_work
via xfs_inodegc_set_reclaimable. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/pagewalk: fix race between concurrent split and refault
The splitting of a PUD entry in walk_pud_range() can race with a
concurrent thread refaulting the PUD leaf entry causing it to try walking
a PMD range that has disappeared.
An example and reproduction of this is to try reading numa_maps of a
process while VFIO-PCI is setting up DMA (specifically the
vfio_pin_pages_remote call) on a large BAR for that process.
This will trigger a kernel BUG:
vfio-pci 0000:03:00.0: enabling device (0000 -> 0002)
BUG: unable to handle page fault for address: ffffa23980000000
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
...
RIP: 0010:walk_pgd_range+0x3b5/0x7a0
Code: 8d 43 ff 48 89 44 24 28 4d 89 ce 4d 8d a7 00 00 20 00 48 8b 4c 24
28 49 81 e4 00 00 e0 ff 49 8d 44 24 ff 48 39 c8 4c 0f 43 e3 <49> f7 06
9f ff ff ff 75 3b 48 8b 44 24 20 48 8b 40 28 48 85 c0 74
RSP: 0018:ffffac23e1ecf808 EFLAGS: 00010287
RAX: 00007f44c01fffff RBX: 00007f4500000000 RCX: 00007f44ffffffff
RDX: 0000000000000000 RSI: 000ffffffffff000 RDI: ffffffff93378fe0
RBP: ffffac23e1ecf918 R08: 0000000000000004 R09: ffffa23980000000
R10: 0000000000000020 R11: 0000000000000004 R12: 00007f44c0200000
R13: 00007f44c0000000 R14: ffffa23980000000 R15: 00007f44c0000000
FS: 00007fe884739580(0000) GS:ffff9b7d7a9c0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa23980000000 CR3: 000000c0650e2005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
__walk_page_range+0x195/0x1b0
walk_page_vma+0x62/0xc0
show_numa_map+0x12b/0x3b0
seq_read_iter+0x297/0x440
seq_read+0x11d/0x140
vfs_read+0xc2/0x340
ksys_read+0x5f/0xe0
do_syscall_64+0x68/0x130
? get_page_from_freelist+0x5c2/0x17e0
? mas_store_prealloc+0x17e/0x360
? vma_set_page_prot+0x4c/0xa0
? __alloc_pages_noprof+0x14e/0x2d0
? __mod_memcg_lruvec_state+0x8d/0x140
? __lruvec_stat_mod_folio+0x76/0xb0
? __folio_mod_stat+0x26/0x80
? do_anonymous_page+0x705/0x900
? __handle_mm_fault+0xa8d/0x1000
? __count_memcg_events+0x53/0xf0
? handle_mm_fault+0xa5/0x360
? do_user_addr_fault+0x342/0x640
? arch_exit_to_user_mode_prepare.constprop.0+0x16/0xa0
? irqentry_exit_to_user_mode+0x24/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fe88464f47e
Code: c0 e9 b6 fe ff ff 50 48 8d 3d be 07 0b 00 e8 69 01 02 00 66 0f 1f
84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00
f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28
RSP: 002b:00007ffe6cd9a9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fe88464f47e
RDX: 0000000000020000 RSI: 00007fe884543000 RDI: 0000000000000003
RBP: 00007fe884543000 R08: 00007fe884542010 R09: 0000000000000000
R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
</TASK>
Fix this by validating the PUD entry in walk_pmd_range() using a stable
snapshot (pudp_get()). If the PUD is not present or is a leaf, retry the
walk via ACTION_AGAIN instead of descending further. This mirrors the
retry logic in walk_pte_range(), which lets walk_pmd_range() retry if the
PTE is not being got by pte_offset_map_lock(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: check contexts->nr in repeat_call_fn
damon_sysfs_repeat_call_fn() calls damon_sysfs_upd_tuned_intervals(),
damon_sysfs_upd_schemes_stats(), and
damon_sysfs_upd_schemes_effective_quotas() without checking contexts->nr.
If nr_contexts is set to 0 via sysfs while DAMON is running, these
functions dereference contexts_arr[0] and cause a NULL pointer
dereference. Add the missing check.
For example, the issue can be reproduced using DAMON sysfs interface and
DAMON user-space tool (damo) [1] like below.
$ sudo damo start --refresh_interval 1s
$ echo 0 | sudo tee \
/sys/kernel/mm/damon/admin/kdamonds/0/contexts/nr_contexts |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: check contexts->nr before accessing contexts_arr[0]
Multiple sysfs command paths dereference contexts_arr[0] without first
verifying that kdamond->contexts->nr == 1. A user can set nr_contexts to
0 via sysfs while DAMON is running, causing NULL pointer dereferences.
In more detail, the issue can be triggered by privileged users like
below.
First, start DAMON and make contexts directory empty
(kdamond->contexts->nr == 0).
# damo start
# cd /sys/kernel/mm/damon/admin/kdamonds/0
# echo 0 > contexts/nr_contexts
Then, each of below commands will cause the NULL pointer dereference.
# echo update_schemes_stats > state
# echo update_schemes_tried_regions > state
# echo update_schemes_tried_bytes > state
# echo update_schemes_effective_quotas > state
# echo update_tuned_intervals > state
Guard all commands (except OFF) at the entry point of
damon_sysfs_handle_cmd(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: fix param_ctx leak on damon_sysfs_new_test_ctx() failure
Patch series "mm/damon/sysfs: fix memory leak and NULL dereference
issues", v4.
DAMON_SYSFS can leak memory under allocation failure, and do NULL pointer
dereference when a privileged user make wrong sequences of control. Fix
those.
This patch (of 3):
When damon_sysfs_new_test_ctx() fails in damon_sysfs_commit_input(),
param_ctx is leaked because the early return skips the cleanup at the out
label. Destroy param_ctx before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix fanout UAF in packet_release() via NETDEV_UP race
`packet_release()` has a race window where `NETDEV_UP` can re-register a
socket into a fanout group's `arr[]` array. The re-registration is not
cleaned up by `fanout_release()`, leaving a dangling pointer in the fanout
array.
`packet_release()` does NOT zero `po->num` in its `bind_lock` section.
After releasing `bind_lock`, `po->num` is still non-zero and `po->ifindex`
still matches the bound device. A concurrent `packet_notifier(NETDEV_UP)`
that already found the socket in `sklist` can re-register the hook.
For fanout sockets, this re-registration calls `__fanout_link(sk, po)`
which adds the socket back into `f->arr[]` and increments `f->num_members`,
but does NOT increment `f->sk_ref`.
The fix sets `po->num` to zero in `packet_release` while `bind_lock` is
held to prevent NETDEV_UP from linking, preventing the race window.
This bug was found following an additional audit with Claude Code based
on CVE-2025-38617. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix circular locking dependency in nci_close_device
nci_close_device() flushes rx_wq and tx_wq while holding req_lock.
This causes a circular locking dependency because nci_rx_work()
running on rx_wq can end up taking req_lock too:
nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete
-> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target
-> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock)
Move the flush of rx_wq after req_lock has been released.
This should safe (I think) because NCI_UP has already been cleared
and the transport is closed, so the work will see it and return
-ENETDOWN.
NIPA has been hitting this running the nci selftest with a debug
kernel on roughly 4% of the runs. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv()
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: set fileio bio failed in short read case
For file-backed mount, IO requests are handled by vfs_iocb_iter_read().
However, it can be interrupted by SIGKILL, returning the number of
bytes actually copied. Unused folios in bio are unexpectedly marked
as uptodate.
vfs_read
filemap_read
filemap_get_pages
filemap_readahead
erofs_fileio_readahead
erofs_fileio_rq_submit
vfs_iocb_iter_read
filemap_read
filemap_get_pages <= detect signal
erofs_fileio_ki_complete <= set all folios uptodate
This patch addresses this by setting short read bio with an error
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
af_key: validate families in pfkey_send_migrate()
syzbot was able to trigger a crash in skb_put() [1]
Issue is that pfkey_send_migrate() does not check old/new families,
and that set_ipsecrequest() @family argument was truncated,
thus possibly overfilling the skb.
Validate families early, do not wait set_ipsecrequest().
[1]
skbuff: skb_over_panic: text:ffffffff8a752120 len:392 put:16 head:ffff88802a4ad040 data:ffff88802a4ad040 tail:0x188 end:0x180 dev:<NULL>
kernel BUG at net/core/skbuff.c:214 !
Call Trace:
<TASK>
skb_over_panic net/core/skbuff.c:219 [inline]
skb_put+0x159/0x210 net/core/skbuff.c:2655
skb_put_zero include/linux/skbuff.h:2788 [inline]
set_ipsecrequest net/key/af_key.c:3532 [inline]
pfkey_send_migrate+0x1270/0x2e50 net/key/af_key.c:3636
km_migrate+0x155/0x260 net/xfrm/xfrm_state.c:2848
xfrm_migrate+0x2140/0x2450 net/xfrm/xfrm_policy.c:4705
xfrm_do_migrate+0x8ff/0xaa0 net/xfrm/xfrm_user.c:3150 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: prevent policy_hthresh.work from racing with netns teardown
A XFRM_MSG_NEWSPDINFO request can queue the per-net work item
policy_hthresh.work onto the system workqueue.
The queued callback, xfrm_hash_rebuild(), retrieves the enclosing
struct net via container_of(). If the net namespace is torn down
before that work runs, the associated struct net may already have
been freed, and xfrm_hash_rebuild() may then dereference stale memory.
xfrm_policy_fini() already flushes policy_hash_work during teardown,
but it does not synchronize policy_hthresh.work.
Synchronize policy_hthresh.work in xfrm_policy_fini() as well, so the
queued work cannot outlive the net namespace teardown and access a
freed struct net. |
| In the Linux kernel, the following vulnerability has been resolved:
esp: fix skb leak with espintcp and async crypto
When the TX queue for espintcp is full, esp_output_tail_tcp will
return an error and not free the skb, because with synchronous crypto,
the common xfrm output code will drop the packet for us.
With async crypto (esp_output_done), we need to drop the skb when
esp_output_tail_tcp returns an error. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: magicmouse: avoid memory leak in magicmouse_report_fixup()
The magicmouse_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: apple: avoid memory leak in apple_report_fixup()
The apple_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: ensure we're polling a polled queue
A user can change the polled queue count at run time. There's a brief
window during a reset where a hipri task may try to poll that queue
before the block layer has updated the queue maps, which would race with
the now interrupt driven queue and may cause double completions. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN
The BPF interpreter's signed 32-bit division and modulo handlers use
the kernel abs() macro on s32 operands. The abs() macro documentation
(include/linux/math.h) explicitly states the result is undefined when
the input is the type minimum. When DST contains S32_MIN (0x80000000),
abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged
on arm64/x86. This value is then sign-extended to u64 as
0xFFFFFFFF80000000, causing do_div() to compute the wrong result.
The verifier's abstract interpretation (scalar32_min_max_sdiv) computes
the mathematically correct result for range tracking, creating a
verifier/interpreter mismatch that can be exploited for out-of-bounds
map value access.
Introduce abs_s32() which handles S32_MIN correctly by casting to u32
before negating, avoiding signed overflow entirely. Replace all 8
abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers.
s32 is the only affected case -- the s64 division/modulo handlers do
not use abs(). |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Make sure to use pmu_ctx->pmu for groups
Oliver reported that x86_pmu_del() ended up doing an out-of-bound memory access
when group_sched_in() fails and needs to roll back.
This *should* be handled by the transaction callbacks, but he found that when
the group leader is a software event, the transaction handlers of the wrong PMU
are used. Despite the move_group case in perf_event_open() and group_sched_in()
using pmu_ctx->pmu.
Turns out, inherit uses event->pmu to clone the events, effectively undoing the
move_group case for all inherited contexts. Fix this by also making inherit use
pmu_ctx->pmu, ensuring all inherited counters end up in the same pmu context.
Similarly, __perf_event_read() should use equally use pmu_ctx->pmu for the
group case. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop()
When querying a nexthop object via RTM_GETNEXTHOP, the kernel currently
allocates a fixed-size skb using NLMSG_GOODSIZE. While sufficient for
single nexthops and small Equal-Cost Multi-Path groups, this fixed
allocation fails for large nexthop groups like 512 nexthops.
This results in the following warning splat:
WARNING: net/ipv4/nexthop.c:3395 at rtm_get_nexthop+0x176/0x1c0, CPU#20: rep/4608
[...]
RIP: 0010:rtm_get_nexthop (net/ipv4/nexthop.c:3395)
[...]
Call Trace:
<TASK>
rtnetlink_rcv_msg (net/core/rtnetlink.c:6989)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
____sys_sendmsg (net/socket.c:721 net/socket.c:736 net/socket.c:2585)
___sys_sendmsg (net/socket.c:2641)
__sys_sendmsg (net/socket.c:2671)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Fix this by allocating the size dynamically using nh_nlmsg_size() and
using nlmsg_new(), this is consistent with nexthop_notify() behavior. In
addition, adjust nh_nlmsg_size_grp() so it calculates the size needed
based on flags passed. While at it, also add the size of NHA_FDB for
nexthop group size calculation as it was missing too.
This cannot be reproduced via iproute2 as the group size is currently
limited and the command fails as follows:
addattr_l ERROR: message exceeded bound of 1048 |
| In the Linux kernel, the following vulnerability has been resolved:
can: raw: fix ro->uniq use-after-free in raw_rcv()
raw_release() unregisters raw CAN receive filters via can_rx_unregister(),
but receiver deletion is deferred with call_rcu(). This leaves a window
where raw_rcv() may still be running in an RCU read-side critical section
after raw_release() frees ro->uniq, leading to a use-after-free of the
percpu uniq storage.
Move free_percpu(ro->uniq) out of raw_release() and into a raw-specific
socket destructor. can_rx_unregister() takes an extra reference to the
socket and only drops it from the RCU callback, so freeing uniq from
sk_destruct ensures the percpu area is not released until the relevant
callbacks have drained.
[mkl: applied manually] |
