| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate resident attribute lists and harden the validator
A base inode's $ATTRIBUTE_LIST is sanity-checked by load_attribute_list()
only on the non-resident path; ntfs_read_locked_inode() copies a *resident*
attribute list into ni->attr_list with a plain memcpy() and no validation
at all. Every subsequent walk of ni->attr_list --
ntfs_external_attr_find(), ntfs_inode_attach_all_extents() and
ntfs_attrlist_need() -- then trusts the entries are well-formed and reads
attr_list_entry fixed-header fields
(lowest_vcn at offset 8, mft_reference at offset 16, and the name) with
bounds that assume validation already happened. A crafted resident
attribute list therefore reaches those walks unvalidated and can drive
out-of-bounds reads of the attribute-list buffer.
load_attribute_list() itself reads ale->name_offset (offset 7),
ale->mft_reference (offset 16) and the name length under only an
"al < al_start + size" bound, so its own validation loop can over-read the
fixed header of a truncated trailing entry by a few bytes.
Factor the per-entry validation into ntfs_attr_list_entry_is_valid(),
which requires each entry's fixed header (offsetof(struct
attr_list_entry, name)) to be in range before any field is dereferenced,
that ale->length is a multiple of 8 covering the fixed header plus the
name, and that the entry is in use and carries a live MFT reference.
ntfs_attr_list_is_valid() walks the buffer with it and checks the entries
tile it exactly. Use the list validator in load_attribute_list()
(replacing the open-coded loop, closing its own over-read) and on the
resident path in ntfs_read_locked_inode() (which previously skipped
validation entirely); patches 2/3 reuse the per-entry helper at the other
two attribute-list walks. |
| Subject::new_for_owner() in the zbus_polkit crate encodes the uid entry of a unix-process polkit subject as an unsigned 32-bit integer (D-Bus type u), whereas the org.freedesktop.PolicyKit1.Authority interface specifies a signed 32-bit integer (D-Bus type i). Because of this type mismatch, polkit silently discards the caller-supplied UID and instead determines the subject's owner itself by looking up the PID in /proc, a lookup that is inherently subject to a time-of-check/time-of-use race.
Consequently, an application that passes a UID obtained from a trustworthy source — for example SO_PEERCRED Unix socket peer credentials — in order to defend against PID reuse receives no protection, and the supplied UID has no effect on the authorization decision. A local unprivileged attacker who can cause an authorized process to terminate and then win the race to have their own process assigned the same PID can be authorized under the identity of the terminated process, bypassing the polkit authorization check and performing actions the attacker is not entitled to.
This issue affects zbus_polkit before 5.1.0. |
| Incorrect authorization in WebAppInstalls in Google Chrome on on Android prior to 152.0.7977.65 allowed a remote attacker to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Incorrect authorization in Mobile in Google Chrome on on iOS prior to 152.0.7977.65 allowed a remote attacker to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Uninitialized resource in Dawn in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to potentially read memory inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Improper access control for some Intel(R) Processors within Ring 3: User Applications may allow an escalation of privilege. Simple hardware adversary with an authenticated user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Improper access control in the firmware for some in Alias Checking Trusted Module for some Intel(R) Xeon(R) processors may allow an escalation of privilege. Startup code and SMM adversary with a privileged user combined with a high complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (high) and availability (none) impacts. |
| Incorrect access control in the setWanCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to alter upstream provisioning and connectivity via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| Incorrect access control in the setUpgradeFW function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to trigger firmware-upgrade workflow changes via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| Improper input validation for some Intel(R) Neural Compressor software before version v3.7 within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (low) and availability (low) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Incorrect access control in the setWiFiSignalCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to reduce wireless power or cause a Denial of Service (DoS) via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| Incorrect access control in the setWiFiEasyGuestCf function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to create or weaken guest wireless access via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| Improper privilege management in Regional Capabilities in Google Chrome prior to 152.0.7977.65 allowed a remote attacker leveraging social engineering to bypass system access restrictions via a crafted Chrome extension. (Chromium security severity: Medium) |
| Out of bounds read in GPU in Google Chrome on on Android prior to 152.0.7977.65 allowed a remote attacker to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Incorrect access control in the setWiFiEasyCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to reconfigure or disable wireless networks via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| Incorrect access control in the setStorageCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to alter the storage-related service state via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| Incorrect access control in the setLanCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to alter LAN network configuration via sending a crafted POST request to /cgi-bin/cstecgi.cgi. |
| Klever-Go is the Go implementation of the Klever blockchain protocol. Prior to 1.7.19, processPercentageRoyaltiesTransfer in core/kapp/accounts/accounts.go calls SubFromBalance after the split loop and after the royaltiesToPay <= 0 early return. computeSplitRoyalties rejects only when splitToPay > royaltiesToPay, so a valid PercentTransferPercentage = 10000 split consumes exactly 100 percent of the royalty pool, sets royaltiesToPay to zero, and returns before the source account is debited. The split recipient receives the full royaltyAmount while the sender pays nothing and the supply counter is not updated, allowing unbounded off-the-books inflation of the transferred KDA. A KDA owner must configure a TransferPercentage royalty with a 100 percent split, after which any holder's transfer of the asset triggers the mint; the sibling processFixedRoyaltiesTransfer path is not affected because it debits the source before distribution. This issue is fixed in version 1.7.19. |
| Uninitialized resource in ANGLE in Google Chrome on on Windows prior to 152.0.7977.65 allowed a remote attacker to obtain cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| MariaDB Connector/Node.js is used to connect applications developed on Node.js to MariaDB and MySQL databases. Prior to 3.2.4, 3.3.3, 3.4.6, and 3.5.3, MariaDB Connector/Node.js permits SQL injection when attacker-controlled Buffer parameters are escaped client-side under the big5, gbk, sjis, cp932, or gb18030 client character sets. PacketOutputStream.writeBufferEscape in lib/io/packet-output-stream.js escaped bytes without the charset-aware getMbRecognizer logic in lib/misc/charset-mb.js. The server SQL lexer runs my_ismbchar before escape processing, so an attacker-controlled lead byte can consume the inserted 0x5C backslash as a multibyte trail byte and leave the following 0x27 quote unescaped, terminating the string literal and allowing arbitrary SQL. The default utf8mb4 character set and parameters sent through the execute binary prepared-statement path are not affected. Successful exploitation can expose or modify data available to the database account. This issue is fixed in versions 3.2.4, 3.3.3, 3.4.6, and 3.5.3. |
