| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: pinconf-generic: Fix memory leak in pinconf_generic_parse_dt_config()
In pinconf_generic_parse_dt_config(), if parse_dt_cfg() fails, it returns
directly. This bypasses the cleanup logic and results in a memory leak of
the cfg buffer.
Fix this by jumping to the out label on failure, ensuring kfree(cfg) is
called before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: free skb on nci_transceive early error paths
nci_transceive() takes ownership of the skb passed by the caller,
but the -EPROTO, -EINVAL, and -EBUSY error paths return without
freeing it.
Due to issues clearing NCI_DATA_EXCHANGE fixed by subsequent changes
the nci/nci_dev selftest hits the error path occasionally in NIPA,
and kmemleak detects leaks:
unreferenced object 0xff11000015ce6a40 (size 640):
comm "nci_dev", pid 3954, jiffies 4295441246
hex dump (first 32 bytes):
6b 6b 6b 6b 00 a4 00 0c 02 e1 03 6b 6b 6b 6b 6b kkkk.......kkkkk
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
backtrace (crc 7c40cc2a):
kmem_cache_alloc_node_noprof+0x492/0x630
__alloc_skb+0x11e/0x5f0
alloc_skb_with_frags+0xc6/0x8f0
sock_alloc_send_pskb+0x326/0x3f0
nfc_alloc_send_skb+0x94/0x1d0
rawsock_sendmsg+0x162/0x4c0
do_syscall_64+0x117/0xfc0 |
| In the Linux kernel, the following vulnerability has been resolved:
udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.
Let's say we bind() an UDP socket to the wildcard address with a
non-zero port, connect() it to an address, and disconnect it from
the address.
bind() sets SOCK_BINDPORT_LOCK on sk->sk_userlocks (but not
SOCK_BINDADDR_LOCK), and connect() calls udp_lib_hash4() to put
the socket into the 4-tuple hash table.
Then, __udp_disconnect() calls sk->sk_prot->rehash(sk).
It computes a new hash based on the wildcard address and moves
the socket to a new slot in the 4-tuple hash table, leaving a
garbage in the chain that no packet hits.
Let's remove such a socket from 4-tuple hash table when disconnected.
Note that udp_sk(sk)->udp_portaddr_hash needs to be udpated after
udp_hash4_dec(hslot2) in udp_unhash4(). |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: bq257xx: Fix device node reference leak in bq257xx_reg_dt_parse_gpio()
In bq257xx_reg_dt_parse_gpio(), if fails to get subchild, it returns
without calling of_node_put(child), causing the device node reference
leak. |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb: etas_es58x: correctly anchor the urb in the read bulk callback
When submitting an urb, that is using the anchor pattern, it needs to be
anchored before submitting it otherwise it could be leaked if
usb_kill_anchored_urbs() is called. This logic is correctly done
elsewhere in the driver, except in the read bulk callback so do that
here also. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: free pages on error in btrfs_uring_read_extent()
In this function the 'pages' object is never freed in the hopes that it is
picked up by btrfs_uring_read_finished() whenever that executes in the
future. But that's just the happy path. Along the way previous
allocations might have gone wrong, or we might not get -EIOCBQUEUED from
btrfs_encoded_read_regular_fill_pages(). In all these cases, we go to a
cleanup section that frees all memory allocated by this function without
assuming any deferred execution, and this also needs to happen for the
'pages' allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: amlogic-spisg: Fix memory leak in aml_spisg_probe()
In aml_spisg_probe(), ctlr is allocated by
spi_alloc_target()/spi_alloc_host(), but fails to call
spi_controller_put() in several error paths. This leads
to a memory leak whenever the driver fails to probe after
the initial allocation.
Convert to use devm_spi_alloc_host()/devm_spi_alloc_target()
to fix the memory leak. |
| An improper resource deallocation and closure vulnerability in the tools/zmqsend.c component of FFmpeg v8.0.1 allows attackers to cause a Denial of Service (DoS) via supplying a crafted input file. |
| Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: Group Replication Plugin). Supported versions that are affected are 8.0.0-8.0.45, 8.4.0-8.4.8 and 9.0.0-9.6.0. Easily exploitable vulnerability allows low privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 6.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). |
| Multiple memory leaks in the IP module in the kernel in Sun Solaris 8 through 10, and OpenSolaris before snv_109, allow local users to cause a denial of service (memory consumption) via vectors related to (1) M_DATA, (2) M_PROTO, (3) M_PCPROTO, and (4) M_SIG STREAMS messages. |
| IBM Rational Build Forge 7.0.2 allows remote attackers to cause a denial of service (CPU consumption) via a port scan, which spawns multiple bfagent server processes that attempt to read data from closed sockets. |
| Clam AntiVirus ClamAV before 0.90 does not close open file descriptors under certain conditions, which allows remote attackers to cause a denial of service (file descriptor consumption and failed scans) via CAB archives with a cabinet header record length of zero, which causes a function to return without closing a file descriptor. |
| The icmp_send function in net/ipv4/icmp.c in the Linux kernel before 2.6.25, when configured as a router with a REJECT route, does not properly manage the Protocol Independent Destination Cache (aka DST) in some situations involving transmission of an ICMP Host Unreachable message, which allows remote attackers to cause a denial of service (connectivity outage) by sending a large series of packets to many destination IP addresses within this REJECT route, related to an "rt_cache leak." |
| Memory leak in the appletalk subsystem in the Linux kernel 2.4.x through 2.4.37.6 and 2.6.x through 2.6.31, when the appletalk and ipddp modules are loaded but the ipddp"N" device is not found, allows remote attackers to cause a denial of service (memory consumption) via IP-DDP datagrams. |
| The IAX2 channel driver (chan_iax2) in Asterisk Open 1.2.x before 1.2.23, 1.4.x before 1.4.9, and Asterisk Appliance Developer Kit before 0.6.0, when configured to allow unauthenticated calls, allows remote attackers to cause a denial of service (resource exhaustion) via a flood of calls that do not complete a 3-way handshake, which causes an ast_channel to be allocated but not released. |
| Memory leak in the Session Initiation Protocol (SIP) implementation in Cisco IOS 12.2 through 12.4, when VoIP is configured, allows remote attackers to cause a denial of service (memory consumption and voice-service outage) via unspecified valid SIP messages. |
| libgphoto2 is a camera access and control library. Versions up to and including 2.5.33 have a memory leak in `ptp_unpack_Sony_DPD()` in `camlibs/ptp2/ptp-pack.c` (lines 884–885). When processing a secondary enumeration list (introduced in 2024+ Sony cameras), the function overwrites dpd->FORM.Enum.SupportedValue with a new calloc() without freeing the previous allocation from line 857. The original array and any string values it contains are leaked on every property descriptor parse. Commit 404ff02c75f3cb280196fc260a63c4d26cf1a8f6 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix refcount leak for cifs_sb_tlink
Fix three refcount inconsistency issues related to `cifs_sb_tlink`.
Comments for `cifs_sb_tlink` state that `cifs_put_tlink()` needs to be
called after successful calls to `cifs_sb_tlink()`. Three calls fail to
update refcount accordingly, leading to possible resource leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: synopsys: dw-dp: fix error paths of dw_dp_bind
Fix several issues in dw_dp_bind() error handling:
1. Missing return after drm_bridge_attach() failure - the function
continued execution instead of returning an error.
2. Resource leak: drm_dp_aux_register() is not a devm function, so
drm_dp_aux_unregister() must be called on all error paths after
aux registration succeeds. This affects errors from:
- drm_bridge_attach()
- phy_init()
- devm_add_action_or_reset()
- platform_get_irq()
- devm_request_threaded_irq()
3. Bug fix: platform_get_irq() returns the IRQ number or a negative
error code, but the error path was returning ERR_PTR(ret) instead
of ERR_PTR(dp->irq).
Use a goto label for cleanup to ensure consistent error handling. |
| NiceGUI is a Python-based UI framework. From versions v2.10.0 to 3.4.1, an unauthenticated attacker can exhaust Redis connections by repeatedly opening and closing browser tabs on any NiceGUI application using Redis-backed storage. Connections are never released, leading to service degradation when Redis hits its connection limit. NiceGUI continues accepting new connections - errors are logged but the app stays up with broken storage functionality. This issue has been patched in version 3.5.0. |
