| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix u16 MTU truncation in media and bearer MTU validation
Both TIPC_NL_MEDIA_SET and TIPC_NL_BEARER_SET accept user-supplied
MTU values but only enforce a minimum bound, not a maximum. When a user
sets the MTU to a value exceeding U16_MAX (65535), it passes validation
but is silently truncated when assigned to u16 fields l->mtu and
l->advertised_mtu in tipc_link_create(). Values like 65536 (0x10000)
truncate to 0, causing a division by zero in tipc_link_set_queue_limits()
which computes TIPC_MAX_PUBL / (l->mtu / ITEM_SIZE). Other overflowing
values (e.g. 65537-131071) produce small incorrect MTU values, resulting
in link malfunction behaviors.
Crash stack (triggered as unprivileged user via user namespace):
tipc_link_set_queue_limits net/tipc/link.c:2531
tipc_link_create net/tipc/link.c:520
tipc_node_check_dest net/tipc/node.c:1279
tipc_disc_rcv net/tipc/discover.c:252
tipc_rcv net/tipc/node.c:2129
tipc_udp_recv net/tipc/udp_media.c:392
Two independent paths lack the upper bound check:
1. tipc_udp_mtu_bad() -- called from __tipc_nl_media_set() (MEDIA_SET)
2. inline check in __tipc_nl_bearer_set() at bearer.c:1160 (BEARER_SET)
Fix both by rejecting MTU values above U16_MAX. |
| In the Linux kernel, the following vulnerability has been resolved:
net: gre: fix lltx regression for GRE tunnels with SEQ/CSUM
Before commit 00d066a4d4ed ("netdev_features: convert NETIF_F_LLTX to
dev->lltx"), NETIF_F_LLTX was set unconditionally in both
__gre_tunnel_init() and ip6gre_tnl_init_features() alongside
GRE_FEATURES:
dev->features |= GRE_FEATURES | NETIF_F_LLTX;
When that commit converted NETIF_F_LLTX to the dev->lltx flag, it
placed 'dev->lltx = true' after the SEQ/CSUM early returns instead
of before them. This causes GRE/GRETAP/ip6gre tunnels with SEQ or
CSUM+encap to lose lockless TX, reintroducing _xmit_lock acquisition
around their ndo_start_xmit. Since GRE xmit re-enters the stack via
ip_tunnel_xmit(), holding _xmit_lock risks ABBA deadlock with the
underlay device.
CPU0 CPU1
---- ----
lock(&qdisc_xmit_lock_key#6);
lock(&qdisc_xmit_lock_key#3);
lock(&qdisc_xmit_lock_key#6);
lock(&qdisc_xmit_lock_key#3);
Fix by moving dev->lltx = true before the early returns in both
functions, restoring the original unconditional behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Zero-extend signed ALU32 div/mod results
ALU32 operations write a 32-bit result and leave the upper 32 bits of
the BPF register zero. The LoongArch JIT sign-extends the result of
signed ALU32 BPF_DIV and BPF_MOD (off=1), so a negative 32-bit quotient
or remainder leaves bits 63:32 set in JITted code while the verifier
and interpreter model those bits as zero.
Keep sign-extension on the operands, which signed divide needs, and
zero-extend the ALU32 result after the divide or modulo instruction,
matching the unsigned ALU32 div/mod paths and every other ALU32
operation in this JIT. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: restrict socket creation to the initial network namespace
QRTR keeps its entire port and node state in module-global variables
that are not partitioned per network namespace: qrtr_local_nid is a
single global node id (always 1) and qrtr_ports is a single global
xarray. qrtr_port_lookup() and qrtr_local_enqueue() operate on that
global state with no network-namespace check, and qrtr_create() places
no restriction on the namespace a socket is created in.
As a result an unprivileged process that creates an AF_QIPCRTR socket
in a separate network namespace, e.g. via
unshare(CLONE_NEWUSER | CLONE_NEWNET), can send QRTR datagrams -
including control-plane messages such as QRTR_TYPE_NEW_SERVER - to QRTR
sockets owned by another namespace, and vice versa. The receiving
socket sees such a message as coming from node id 1, indistinguishable
from a legitimate local client, breaking the isolation that network
namespaces are expected to provide.
QRTR is a transport to global hardware endpoints (the modem and other
remote processors) and has no per-namespace semantics; its in-kernel
name service already creates its socket in init_net only. Confine the
socket family to the initial network namespace, as other
non-namespace-aware socket families do (see llc_ui_create() and the
ieee802154 socket code). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix MCIA register buffer overflow on 32 dword reads
The MCIA register can return up to 32 dwords (128 bytes) when the device
advertises the mcia_32dwords capability, but struct
mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just
12 dwords (48 bytes) of data.
mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then
memcpy()s that many bytes out of the register, potentially reading past
the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this
is caught as a buffer overflow while reading the module EEPROM via
ethtool:
detected buffer overflow in memcpy
kernel BUG at lib/string_helpers.c:1048!
RIP: 0010:fortify_panic+0x13/0x20
Call Trace:
mlx5_query_mcia.isra.0+0x200/0x210 [mlx5_core]
mlx5_query_module_eeprom_by_page+0x4a/0xa0 [mlx5_core]
mlx5e_get_module_eeprom_by_page+0xbb/0x120 [mlx5_core]
eeprom_prepare_data+0xf3/0x170
ethnl_default_doit+0xf1/0x3b0
Extend the mcia_reg layout to 32 dwords. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: prevent tstamp ring allocation for non-PF VSI types
The pf->txtime_txqs bitmap tracks which Tx queues have ETF (Earliest
TxTime First) offload enabled. This bitmap is indexed by queue number
and is set by ice_offload_txtime(), which only operates on PF VSI
queues.
However, ice_is_txtime_ena() does not check the VSI type before
consulting the bitmap. When ETF offload is enabled on PF Tx queue 0,
bit 0 is set in pf->txtime_txqs. During a subsequent PCI reset
rebuild, the CTRL VSI's Tx queue 0 is reconfigured and
ice_is_txtime_ena() is called for that ring. Since it only checks
pf->txtime_txqs by queue index without distinguishing VSI type, it
finds bit 0 set and returns true, matching the PF VSI's ETF queue,
not the CTRL VSI's. This causes ice_vsi_cfg_txq() to spuriously
allocate a tstamp_ring for the CTRL VSI ring.
Since CTRL VSI rings have no associated netdev, ice_clean_tx_ring()
takes an early return at the !netdev check before reaching
ice_free_tx_tstamp_ring(), leaking the allocation. Each PCI reset
leaks one 64-byte tstamp_ring.
Fix this by restricting ice_is_txtime_ena() to return true only for
PF VSI rings, since txtime_txqs is only meaningful for PF VSI queues. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix max_vport related crash on allocation error during init
Set adapter->max_vports only after successful allocation of vports, netdevs
and vport_config buffers. This fixes possible crashes on reset or rmmod,
following failed allocation on init
[ 305.981402] idpf 0000:83:00.0: enabling device (0100 -> 0102)
[ 305.994464] idpf 0000:83:00.0: Device HW Reset initiated
[ 320.416872] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 320.416918] #PF: supervisor read access in kernel mode
[ 320.416942] #PF: error_code(0x0000) - not-present page
[ 320.416963] PGD 2099657067 P4D 0
[ 320.416983] Oops: Oops: 0000 [#1] SMP NOPTI
...
[ 320.417093] RIP: 0010:idpf_remove+0x118/0x200 [idpf]
[ 320.417130] Code: 8b bb 98 09 00 00 e8 17 0f 5b e5 48 8b bb e8 08 00 00 e8 0b 0f 5b e5 66 83 bb 28 06 00 00 00 48 8b bb 20 06 00 00 74 49 31 ed <48> 8b 04 ef 48 85 c0 74 2f 48 8b 78 20 e8 66 58 91 e5 48 8b 83 20
[ 320.417183] RSP: 0018:ff7322212903fdb8 EFLAGS: 00010246
[ 320.417205] RAX: 0000000000000000 RBX: ff4463de40300000 RCX: ff7322212903fd4c
[ 320.417228] RDX: 0000000000000001 RSI: ffffffffa7f7d100 RDI: 0000000000000000
[ 320.417250] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
[ 320.417272] R10: 0000000000000001 R11: ff4463de3a638f58 R12: ff4463be89ac7000
[ 320.417294] R13: ff4463be89ac7198 R14: ff4463be94fc7198 R15: ffffffffc0f10f20
[ 320.417317] FS: 00007f963c0e6740(0000) GS:ff4463fdd65d8000(0000) knlGS:0000000000000000
[ 320.417342] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 320.417362] CR2: 0000000000000000 CR3: 00000020ba674002 CR4: 0000000000773ef0
[ 320.417385] PKRU: 55555554
[ 320.417398] Call Trace:
[ 320.417412] <TASK>
[ 320.417429] pci_device_remove+0x42/0xb0
[ 320.417459] device_release_driver_internal+0x1a9/0x210
[ 320.417492] driver_detach+0x4b/0x90
[ 320.417516] bus_remove_driver+0x70/0x100
[ 320.417539] pci_unregister_driver+0x2e/0xb0
[ 320.417564] __do_sys_delete_module.constprop.0+0x190/0x2f0
[ 320.417592] ? kmem_cache_free+0x31e/0x550
[ 320.417619] ? lockdep_hardirqs_on_prepare+0xde/0x190
[ 320.417644] ? do_syscall_64+0x38/0x6b0
[ 320.417665] do_syscall_64+0xc8/0x6b0
[ 320.417683] ? clear_bhb_loop+0x30/0x80
[ 320.417706] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 320.417727] RIP: 0033:0x7f963bb30beb |
| In the Linux kernel, the following vulnerability has been resolved:
rds: tcp: unregister sysctl before tearing down listen socket
rds_tcp_exit_net() frees the per-netns RDS TCP listen socket via
rds_tcp_kill_sock() before unregistering the per-netns sysctl table. Since
rds_tcp_skbuf_handler() derives the netns from
rtn->rds_tcp_listen_sock->sk, a concurrent sysctl write can race with
netns teardown and dereference the freed socket/sk.
KASAN reports the race as:
BUG: KASAN: slab-use-after-free in rds_tcp_skbuf_handler+0x2aa/0x2e0
rds_tcp_skbuf_handler net/rds/tcp.c:721
proc_sys_call_handler fs/proc/proc_sysctl.c
vfs_write fs/read_write.c
__x64_sys_pwrite64 fs/read_write.c
Fix this by unregistering the RDS TCP sysctl table before calling
rds_tcp_kill_sock(). unregister_net_sysctl_table() prevents new sysctl
handlers from starting and waits for in-flight handlers to finish, so
the listen socket can then be released safely. The fix was tested
against the linked reproducer. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream()
In tipc_recvmsg(), the copy length is computed as:
copy = min_t(int, dlen - offset, buflen);
buflen is size_t but min_t(int, ...) casts it to int. When buflen
exceeds INT_MAX (e.g. 0xFFFFFFFF via io_uring provided buffers), it
wraps negative, wins the comparison, and the negative copy length
propagates to simple_copy_to_iter() where int-to-size_t promotion
makes it SIZE_MAX, triggering a WARN_ON. tipc_recvstream() has the
same pattern.
Kernel panic - not syncing: kernel: panic_on_warn set ...
RIP: 0010:simple_copy_to_iter+0x9e/0xd0 (net/core/datagram.c:521)
Call Trace:
__skb_datagram_iter+0x123/0x8b0 (net/core/datagram.c:402)
skb_copy_datagram_iter+0x77/0x1a0 (net/core/datagram.c:534)
tipc_recvmsg+0x3d7/0xe80 (net/tipc/socket.c:1934)
io_recvmsg+0x47e/0xda0
Fix by changing min_t(int, ...) to min_t(size_t, ...) in both
functions. The result is always <= (dlen - offset), which is bounded
by TIPC maximum message size (0x1ffff bytes), so the implicit
narrowing on assignment to int copy is always safe. |
| In the Linux kernel, the following vulnerability has been resolved:
net: drop_monitor: fix info leak in NET_DM_ATTR_PAYLOAD
net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() open code
the NET_DM_ATTR_PAYLOAD attribute to avoid zeroing the packet payload
before overwriting it with skb_copy_bits().
skb_put() reserves nla_total_size(payload_len), i.e. the header plus the
NLA_ALIGN() padding, but only payload_len bytes are copied in. When
payload_len is not a multiple of 4 the 1-3 padding bytes are never
initialized and are leaked to user space inside the netlink message.
KMSAN confirms the leak for the software path when the packet payload
length is not 4-byte aligned:
BUG: KMSAN: kernel-infoleak in _copy_to_iter
_copy_to_iter
__skb_datagram_iter
skb_copy_datagram_iter
netlink_recvmsg
sock_recvmsg
__sys_recvfrom
Uninit was created at:
kmem_cache_alloc_node_noprof
__alloc_skb
net_dm_packet_work
Bytes 173-175 of 176 are uninitialized
Use __nla_reserve(), which sets up the attribute header and zeroes the
padding, instead of open coding the attribute construction. |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: fix size calculations for 64-bit attributes
net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use
nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and
NET_DM_ATTR_TIMESTAMP).
On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS,
nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for
64-bit alignment.
However, net_dm_packet_report_size() and net_dm_hw_packet_report_size()
used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)),
budgeting 12 bytes instead of up to 16 bytes.
This under-estimation of SKB size can lead to an skb_over_panic() when
__nla_reserve() or skb_put() is subsequently called.
Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations. |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: perform u64_stats updates under IRQ-disabled section
In net_dm_packet_trace_kfree_skb_hit() and net_dm_hw_trap_packet_probe(),
u64_stats_update_begin() / u64_stats_inc() / u64_stats_update_end() were
called after spin_unlock_irqrestore(&...drop_queue.lock, flags), when local
IRQs had already been re-enabled.
Tracepoint probes can execute in IRQ or softirq context. On 32-bit
architectures, u64_stats_update_begin() disables preemption but not interrupts,
relying on seqcount writes. If a nested interrupt occurs on the same CPU during
the 64-bit stats update, the reentrant seqcount update can corrupt the
seqcount state or stats value.
Fix this by performing the 64-bit per-CPU stats update before releasing
drop_queue.lock via spin_unlock_irqrestore(), ensuring local interrupts remain
disabled during the u64_stats update. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Fix memory leak in bpf_jit_free()
When bpf_int_jit_compile() is called for subprograms, it returns early
during the first pass (!prog->is_func || extra_pass is false), keeping
ctx->offset alive for the subsequent extra pass.
If JIT compilation fails for a later subprogram, the BPF core aborts and
calls bpf_jit_free() to clean up the first subprogram. However,
bpf_jit_free() fails to free jit_data->ctx.offset, which causes a memory
leak of the JIT context offsets array.
So fix this by adding the missing kvfree(jit_data->ctx.offset) in
bpf_jit_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix cork use-after-free in tcp_bpf_sendmsg()
tcp_bpf_sendmsg() keeps msg_tx across sk_stream_wait_memory(), which
drops and reacquires the socket lock. Its error path tries to decide
whether msg_tx names the local temporary message by comparing it with
the current value of psock->cork.
This comparison is unsafe when two threads send on the same socket:
Thread A Thread B
msg_tx = psock->cork
sk_msg_alloc() fails
sk_stream_wait_memory()
releases the socket lock acquires the socket lock
completes the cork
psock->cork = NULL
frees the cork
reacquires the socket lock
msg_tx != psock->cork
sk_msg_free(msg_tx)
The stale cork is therefore mistaken for the local temporary message
and freed again. KASAN reported:
BUG: KASAN: slab-use-after-free in sk_msg_free+0x49/0x50
Read of size 4 at addr ffff88810c908800 by task poc/90
Call Trace:
sk_msg_free+0x49/0x50
tcp_bpf_sendmsg+0x14f5/0x1cc0
__sys_sendto+0x32c/0x3a0
__x64_sys_sendto+0xdb/0x1b0
Allocated by task 89:
__kasan_kmalloc+0x8f/0xa0
tcp_bpf_sendmsg+0x16b3/0x1cc0
Freed by task 91:
__kasan_slab_free+0x43/0x70
kfree+0x131/0x3c0
tcp_bpf_sendmsg+0xec3/0x1cc0
msg_tx can only name the stack-local tmp or the shared cork. Check for
tmp directly so a changed psock->cork cannot turn a shared message into
an apparent local one. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix use-after-free freeing trigger private data
Commit 61d445af0a7c ("tracing: Add bulk garbage collection of freeing
event_trigger_data") moved the kfree() of event_trigger_data to a kthread
that runs tracepoint_synchronize_unregister() before freeing. That removed
the synchronization the trigger .free callbacks used to get implicitly and
inline from trigger_data_free().
event_hist_trigger_free(), event_hist_trigger_named_free() and
event_enable_trigger_free() free their satellite data (hist_data, cmd_ops,
enable_data) right after trigger_data_free() returns. With the
synchronization now deferred to the kthread, a concurrent tracepoint
handler can still reach that data through the list_del_rcu()'d trigger,
causing a use-after-free.
The histogram teardown must stay synchronous: remove_hist_vars() and
unregister_field_var_hists() have to detach a synthetic event from the
histogram before the trigger-removal write returns, otherwise a following
command races in and the synthetic-event removal fails with -EBUSY, as the
trigger-synthetic-eprobe.tc selftest catches. Make those callbacks wait
with the correct barrier - tracepoint_synchronize_unregister(), matching
the free kthread - before freeing.
The enable trigger has no such synchronous requirement, and a blocking
synchronize there would re-serialize the path that commit deliberately
deferred. Give it an optional private_data_free() callback that the free
kthread runs after its grace period, and free enable_data from there. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: analogix_dp: Add missing error check for platform_get_resource()
Add missing error check for platform_get_resource() return value to
prevent NULL pointer dereference when memory resource is not available. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Count paired job fence as dependency in prepare_job()
The DRM scheduler's prepare_job() callback counts the remaining
non-signaled native dependencies for a job, preventing job submission
until those (plus job data and fence update) can fit in the job queue's
CCCB.
This means checking which dependencies can be waited upon in the
firmware, i.e. whether they are backed by a UFO object, i.e. whether
their drm_sched_fence::parent has been assigned to a
pvr_queue_fence::base fence. That happens when the job owning the fence
is submitted to the firmware.
Paired geometry and fragment jobs are submitted at the same time, which
means the dependency between them can't be checked this way before
submission.
Update job_count_remaining_native_deps() to take into account the
dependency between paired jobs.
This fixes cases where prepare_job() underestimated the space left in
an almost full fragment CCCB, wrongly unblocking run_job(), which then
returned early without writing the full sequence of commands to the
CCCB.
The above lead to kernel warnings such as the following and potentially
job timeouts (depending on waiters on the missing commands):
[ 375.702979] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#1: kworker/u16:3/47
[ 375.703160] Modules linked in:
[ 375.703571] CPU: 1 UID: 0 PID: 47 Comm: kworker/u16:3 Tainted: G W 7.0.0-rc2-g817eb6b11ad5 #40 PREEMPT
[ 375.703613] Tainted: [W]=WARN
[ 375.703627] Hardware name: Texas Instruments AM625 SK (DT)
[ 375.703645] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched]
[ 375.703741] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 375.703764] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr]
[ 375.703847] lr : pvr_queue_submit_job_to_cccb+0x578/0xa70 [powervr]
[ 375.703921] sp : ffff800084a97650
[ 375.703934] x29: ffff800084a97740 x28: 0000000000000958 x27: ffff80008565d000
[ 375.703979] x26: 0000000000000030 x25: ffff800084a97680 x24: 0000000000001000
[ 375.704017] x23: ffff800084a97820 x22: 1ffff00010952ecc x21: 0000000000000008
[ 375.704056] x20: 00000000000006a8 x19: ffff00002ff7da88 x18: 0000000000000000
[ 375.704093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000
[ 375.704132] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 375.704168] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3
[ 375.704206] x8 : 00000000f2f2f200 x7 : ffff700010952ecc x6 : 0000000000000008
[ 375.704243] x5 : 0000000000000000 x4 : 1ffff00010acba00 x3 : 0000000000000000
[ 375.704279] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f
[ 375.704317] Call trace:
[ 375.704331] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P)
[ 375.704411] pvr_queue_submit_job_to_cccb+0x578/0xa70 [powervr]
[ 375.704487] pvr_queue_run_job+0x3a4/0x990 [powervr]
[ 375.704562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched]
[ 375.704623] process_one_work+0x520/0x1288
[ 375.704658] worker_thread+0x3f0/0xb3c
[ 375.704680] kthread+0x334/0x3d8
[ 375.704706] ret_from_fork+0x10/0x20
[ 375.704736] ---[ end trace 0000000000000000 ]--- |
| A security flaw has been discovered in SourceCodester Simple Doctors Appointment System 1.0. This vulnerability affects unknown code of the file /admin/ajax.php?action=delete_appointment. The manipulation of the argument ID results in sql injection. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: cdns-dsi: Replace deprecated UNIVERSAL_DEV_PM_OPS()
The deprecated UNIVERSAL_DEV_PM_OPS() macro uses the provided callbacks
for both runtime PM and system sleep. This causes the DSI clocks to be
disabled twice: once during runtime suspend and again during system
suspend, resulting in a WARN message from the clock framework when
attempting to disable already-disabled clocks.
[ 84.384540] clk:231:5 already disabled
[ 84.388314] WARNING: CPU: 2 PID: 531 at /drivers/clk/clk.c:1181 clk_core_disable+0xa4/0xac
...
[ 84.579183] Call trace:
[ 84.581624] clk_core_disable+0xa4/0xac
[ 84.585457] clk_disable+0x30/0x4c
[ 84.588857] cdns_dsi_suspend+0x20/0x58 [cdns_dsi]
[ 84.593651] pm_generic_suspend+0x2c/0x44
[ 84.597661] ti_sci_pd_suspend+0xbc/0x15c
[ 84.601670] dpm_run_callback+0x8c/0x14c
[ 84.605588] __device_suspend+0x1a0/0x56c
[ 84.609594] dpm_suspend+0x17c/0x21c
[ 84.613165] dpm_suspend_start+0xa0/0xa8
[ 84.617083] suspend_devices_and_enter+0x12c/0x634
[ 84.621872] pm_suspend+0x1fc/0x368
To address this issue, replace UNIVERSAL_DEV_PM_OPS() with
RUNTIME_PM_OPS(). Bridge and panel drivers should only deal with runtime
PM, as the DRM framework manages system-wide power transitions through
the bridge enable() and disable() hooks. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp/mst: fix OOB reads in remote DPCD/I2C sideband reply parsers
drm_dp_sideband_parse_remote_dpcd_read() reads num_bytes from the raw
message and then unconditionally does:
memcpy(bytes, &raw->msg[idx], num_bytes);
without checking that idx + num_bytes <= raw->curlen. raw->msg[] is
256 bytes; if a malicious or misbehaving MST hub sets num_bytes larger
than the remaining payload, the memcpy reads past the received data
into whatever follows in raw->msg[].
drm_dp_sideband_parse_remote_i2c_read_ack() has the same flaw (noted
with a /* TODO check */ comment since the code was introduced).
Fix both functions by using a single combined check
(idx + num_bytes > curlen) before each memcpy. Since num_bytes is u8,
it is always >= 0, so this strictly subsumes the simpler idx > curlen
form and no separate step is needed.
[added missing fixes tag] |
