| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: yurex: fix race in probe
The bbu member of the descriptor must be set to the value
standing for uninitialized values before the URB whose
completion handler sets bbu is submitted. Otherwise there is
a window during which probing can overwrite already retrieved
data. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Fix memory leak in xhci_disable_slot()
xhci_alloc_command() allocates a command structure and, when the
second argument is true, also allocates a completion structure.
Currently, the error handling path in xhci_disable_slot() only frees
the command structure using kfree(), causing the completion structure
to leak.
Use xhci_free_command() instead of kfree(). xhci_free_command() correctly
frees both the command structure and the associated completion structure.
Since the command structure is allocated with zero-initialization,
command->in_ctx is NULL and will not be erroneously freed by
xhci_free_command().
This bug was found using an experimental static analysis tool we are
developing. The tool is based on the LLVM framework and is specifically
designed to detect memory management issues. It is currently under
active development and not yet publicly available, but we plan to
open-source it after our research is published.
The bug was originally detected on v6.13-rc1 using our static analysis
tool, and we have verified that the issue persists in the latest mainline
kernel.
We performed build testing on x86_64 with allyesconfig using GCC=11.4.0.
Since triggering these error paths in xhci_disable_slot() requires specific
hardware conditions or abnormal state, we were unable to construct a test
case to reliably trigger these specific error paths at runtime. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: check ownership before using vma
When installing missing pages (or zapping them), Rust Binder will look
up the vma in the mm by address, and then call vm_insert_page (or
zap_page_range_single). However, if the vma is closed and replaced with
a different vma at the same address, this can lead to Rust Binder
installing pages into the wrong vma.
By installing the page into a writable vma, it becomes possible to write
to your own binder pages, which are normally read-only. Although you're
not supposed to be able to write to those pages, the intent behind the
design of Rust Binder is that even if you get that ability, it should not
lead to anything bad. Unfortunately, due to another bug, that is not the
case.
To fix this, store a pointer in vm_private_data and check that the vma
returned by vma_lookup() has the right vm_ops and vm_private_data before
trying to use the vma. This should ensure that Rust Binder will refuse
to interact with any other VMA. The plan is to introduce more vma
abstractions to avoid this unsafe access to vm_ops and vm_private_data,
but for now let's start with the simplest possible fix.
C Binder performs the same check in a slightly different way: it
provides a vm_ops->close that sets a boolean to true, then checks that
boolean after calling vma_lookup(), but this is more fragile
than the solution in this patch. (We probably still want to do both, but
the vm_ops->close callback will be added later as part of the follow-up
vma API changes.)
It's still possible to remap the vma so that pages appear in the right
vma, but at the wrong offset, but this is a separate issue and will be
fixed when Rust Binder gets a vm_ops->close callback. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain()
In the drain loop, the local variable 'runtime' is reassigned to a
linked stream's runtime (runtime = s->runtime at line 2157). After
releasing the stream lock at line 2169, the code accesses
runtime->no_period_wakeup, runtime->rate, and runtime->buffer_size
(lines 2170-2178) — all referencing the linked stream's runtime without
any lock or refcount protecting its lifetime.
A concurrent close() on the linked stream's fd triggers
snd_pcm_release_substream() → snd_pcm_drop() → pcm_release_private()
→ snd_pcm_unlink() → snd_pcm_detach_substream() → kfree(runtime).
No synchronization prevents kfree(runtime) from completing while the
drain path dereferences the stale pointer.
Fix by caching the needed runtime fields (no_period_wakeup, rate,
buffer_size) into local variables while still holding the stream lock,
and using the cached values after the lock is released. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix physical SQE bounds check for SQE_MIXED 128-byte ops
When IORING_SETUP_SQE_MIXED is used without IORING_SETUP_NO_SQARRAY,
the boundary check for 128-byte SQE operations in io_init_req()
validated the logical SQ head position rather than the physical SQE
index.
The existing check:
!(ctx->cached_sq_head & (ctx->sq_entries - 1))
ensures the logical position isn't at the end of the ring, which is
correct for NO_SQARRAY rings where physical == logical. However, when
sq_array is present, an unprivileged user can remap any logical
position to an arbitrary physical index via sq_array. Setting
sq_array[N] = sq_entries - 1 places a 128-byte operation at the last
physical SQE slot, causing the 128-byte memcpy in
io_uring_cmd_sqe_copy() to read 64 bytes past the end of the SQE
array.
Replace the cached_sq_head alignment check with a direct validation
of the physical SQE index, which correctly handles both sq_array and
NO_SQARRAY cases. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp-mach-common: Add missing error check for clock acquisition
The acp_card_rt5682_init() and acp_card_rt5682s_init() functions did not
check the return values of clk_get(). This could lead to a kernel crash
when the invalid pointers are later dereferenced by clock core
functions.
Fix this by:
1. Changing clk_get() to the device-managed devm_clk_get().
2. Adding IS_ERR() checks immediately after each clock acquisition. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Unreserve bo if queue update failed
Error handling path should unreserve bo then return failed.
(cherry picked from commit c24afed7de9ecce341825d8ab55a43a254348b33) |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: fix PTP use-after-free during reset
Commit 7c01dbfc8a1c5f ("iavf: periodically cache PHC time") introduced a
worker to cache PHC time, but failed to stop it during reset or disable.
This creates a race condition where `iavf_reset_task()` or
`iavf_disable_vf()` free adapter resources (AQ) while the worker is still
running. If the worker triggers `iavf_queue_ptp_cmd()` during teardown, it
accesses freed memory/locks, leading to a crash.
Fix this by calling `iavf_ptp_release()` before tearing down the adapter.
This ensures `ptp_clock_unregister()` synchronously cancels the worker and
cleans up the chardev before the backing resources are destroyed. |
| An issue was discovered in kosma minmea 0.3.0. The minmea_scan functions format specifier copies NMEA field data to a caller-provided buffer without a size parameter. Applications using minmea_scan on untrusted input are vulnerable to a stack buffer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
gpib: lpvo_usb: fix memory leak on disconnect
The driver iterates over the registered USB interfaces during GPIB
attach and takes a reference to their USB devices until a match is
found. These references are never released which leads to a memory leak
when devices are disconnected.
Fix the leak by dropping the unnecessary references. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050: Move iio_device_register() to correct location
iio_device_register() should be at the end of the probe function to
prevent race conditions.
Place iio_device_register() at the end of the probe function and place
iio_device_unregister() accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050: Fix irq resource leak
The interrupt handler is setup but only a few lines down if
iio_trigger_register() fails the function returns without properly
releasing the handler.
Add cleanup goto to resolve resource leak.
Detected by Smatch:
drivers/iio/gyro/mpu3050-core.c:1128 mpu3050_trigger_probe() warn:
'irq' from request_threaded_irq() not released on lines: 1124. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050: Fix incorrect free_irq() variable
The handler for the IRQ part of this driver is mpu3050->trig but,
in the teardown free_irq() is called with handler mpu3050.
Use correct IRQ handler when calling free_irq(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only
The st_lsm6dsx_hwfifo_odr_store() function, which is called when userspace
writes the buffer sampling frequency sysfs attribute, calls
st_lsm6dsx_check_odr(), which accesses the odr_table array at index
`sensor->id`; since this array is only 2 entries long, an access for any
sensor type other than accelerometer or gyroscope is an out-of-bounds
access.
The motivation for being able to set a buffer frequency different from the
sensor sampling frequency is to support use cases that need accurate event
detection (which requires a high sampling frequency) while retrieving
sensor data at low frequency. Since all the supported event types are
generated from acceleration data only, do not create the buffer sampling
frequency attribute for sensor types other than the accelerometer. |
| Directory Traversal vulnerability in fohrloop dash-uploader v.0.1.0 through v.0.7.0a2 allows a remote attacker to execute arbitrary code via the dash_uploader/httprequesthandler.py, aseHttpRequestHandler.get_temp_root(), BaseHttpRequestHandler._post() components |
| Crypt::PasswdMD5 versions through 1.42 for Perl generates insecure random values for salts.
The built-in rand function is predictable, and unsuitable for cryptography. |
| In the Linux kernel, the following vulnerability has been resolved:
pstore: ram_core: fix incorrect success return when vmap() fails
In persistent_ram_vmap(), vmap() may return NULL on failure.
If offset is non-zero, adding offset_in_page(start) causes the function
to return a non-NULL pointer even though the mapping failed.
persistent_ram_buffer_map() therefore incorrectly returns success.
Subsequent access to prz->buffer may dereference an invalid address
and cause crashes.
Add proper NULL checking for vmap() failures. |
| ZEBRA is a Zcash node written entirely in Rust. Prior to zebrad version 4.4.0, prior to zebra-chain version 7.0.0, and prior to zebra-network version 6.0.0, several inbound deserialization paths in Zebra allocated buffers sized against generic transport or block-size ceilings before the tighter protocol or consensus limits were enforced. An unauthenticated or post-handshake peer could therefore force the node to preallocate and parse for orders of magnitude more data than the protocol intended, across headers messages, equihash solutions in block headers, Sapling spend vectors in V5/V4 transactions, and coinbase script bytes in blocks. This issue has been patched in zebrad version 4.4.0, zebra-chain version 7.0.0, and zebra-network version 6.0.0. |
| When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: Fix race bug in nvme_poll_irqdisable()
In the following scenario, pdev can be disabled between (1) and (3) by
(2). This sets pdev->msix_enabled = 0. Then, pci_irq_vector() will
return MSI-X IRQ(>15) for (1) whereas return INTx IRQ(<=15) for (2).
This causes IRQ warning because it tries to enable INTx IRQ that has
never been disabled before.
To fix this, save IRQ number into a local variable and ensure
disable_irq() and enable_irq() operate on the same IRQ number. Even if
pci_free_irq_vectors() frees the IRQ concurrently, disable_irq() and
enable_irq() on a stale IRQ number is still valid and safe, and the
depth accounting reamins balanced.
task 1:
nvme_poll_irqdisable()
disable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(1)
enable_irq(pci_irq_vector(pdev, nvmeq->cq_vector)) ...(3)
task 2:
nvme_reset_work()
nvme_dev_disable()
pdev->msix_enable = 0; ...(2)
crash log:
------------[ cut here ]------------
Unbalanced enable for IRQ 10
WARNING: kernel/irq/manage.c:753 at __enable_irq+0x102/0x190 kernel/irq/manage.c:753, CPU#1: kworker/1:0H/26
Modules linked in:
CPU: 1 UID: 0 PID: 26 Comm: kworker/1:0H Not tainted 6.19.0-dirty #9 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: kblockd blk_mq_timeout_work
RIP: 0010:__enable_irq+0x107/0x190 kernel/irq/manage.c:753
Code: ff df 48 89 fa 48 c1 ea 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 79 48 8d 3d 2e 7a 3f 05 41 8b 74 24 2c <67> 48 0f b9 3a e8 ef b9 21 00 5b 41 5c 5d e9 46 54 66 03 e8 e1 b9
RSP: 0018:ffffc900001bf550 EFLAGS: 00010046
RAX: 0000000000000007 RBX: 0000000000000000 RCX: ffffffffb20c0e90
RDX: 0000000000000000 RSI: 000000000000000a RDI: ffffffffb74b88f0
RBP: ffffc900001bf560 R08: ffff88800197cf00 R09: 0000000000000001
R10: 0000000000000003 R11: 0000000000000003 R12: ffff8880012a6000
R13: 1ffff92000037eae R14: 000000000000000a R15: 0000000000000293
FS: 0000000000000000(0000) GS:ffff8880b49f7000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555da4a25fa8 CR3: 00000000208e8000 CR4: 00000000000006f0
Call Trace:
<TASK>
enable_irq+0x121/0x1e0 kernel/irq/manage.c:797
nvme_poll_irqdisable+0x162/0x1c0 drivers/nvme/host/pci.c:1494
nvme_timeout+0x965/0x14b0 drivers/nvme/host/pci.c:1744
blk_mq_rq_timed_out block/blk-mq.c:1653 [inline]
blk_mq_handle_expired+0x227/0x2d0 block/blk-mq.c:1721
bt_iter+0x2fc/0x3a0 block/blk-mq-tag.c:292
__sbitmap_for_each_set include/linux/sbitmap.h:269 [inline]
sbitmap_for_each_set include/linux/sbitmap.h:290 [inline]
bt_for_each block/blk-mq-tag.c:324 [inline]
blk_mq_queue_tag_busy_iter+0x969/0x1e80 block/blk-mq-tag.c:536
blk_mq_timeout_work+0x627/0x870 block/blk-mq.c:1763
process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257
process_scheduled_works kernel/workqueue.c:3340 [inline]
worker_thread+0x65c/0xe60 kernel/workqueue.c:3421
kthread+0x41a/0x930 kernel/kthread.c:463
ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
</TASK>
irq event stamp: 74478
hardirqs last enabled at (74477): [<ffffffffb5720a9c>] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:159 [inline]
hardirqs last enabled at (74477): [<ffffffffb5720a9c>] _raw_spin_unlock_irq+0x2c/0x60 kernel/locking/spinlock.c:202
hardirqs last disabled at (74478): [<ffffffffb57207b5>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline]
hardirqs last disabled at (74478): [<ffffffffb57207b5>] _raw_spin_lock_irqsave+0x85/0xa0 kernel/locking/spinlock.c:162
softirqs last enabled at (74304): [<ffffffffb1e9466c>] __do_softirq kernel/softirq.c:656 [inline]
softirqs last enabled at (74304): [<ffffffffb1e9466c>] invoke_softirq kernel/softirq.c:496 [inline]
softirqs last enabled at (74304): [<ffffffffb1e9466c>] __irq_exit_rcu+0xdc/0x120
---truncated--- |
