| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SvelteKit is a framework for rapidly developing robust, performant web applications using Svelte. Prior to 2.70.2, the content negotiation header parser used by SvelteKit's request handling (for headers such as Accept) uses a regular expression vulnerable to quadratic backtracking, so a maliciously crafted header value can cause excessive CPU consumption and degrade or deny service. Version 2.70.2 fixes the issue. |
| A vulnerability was identified in WonderTrader up to 0.9.9. Affected is the function _undone_qty in the library src/WtCore/TraderAdapter.h of the component Pending Order Handler. The manipulation of the argument getUndoneQty leads to enforcement of behavioral workflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Ruby JSON is a JSON implementation for Ruby. From 2.20.0 until 2.21.2, Ruby's JSON native C extension clears the consumed JSON::ResumableParser input buffer but leaves state.start, state.cursor, and state.end pointing into released storage. When partial_value reconstructs an incomplete object containing duplicate keys, the duplicate-key warning path calls cursor_position, which dereferences those stale pointers. This results in a heap-use-after-free and can terminate the Ruby process. An attacker who can supply JSON stream data to an application using JSON::ResumableParser may cause process termination when the application calls partial_value on incomplete attacker-controlled input containing duplicate object keys. This issue has been fixed in version 2.21.2. |
| Grav CMS's scheduler-webhook plugin contains an authentication bypass in the webhook token check. When the webhook feature is enabled but no webhookToken is configured, a compound conditional short-circuits and skips token validation, so an unauthenticated remote attacker who can reach POST /scheduler/webhook can trigger the operator's already-configured scheduled jobs by sending a single request. The primitive is triggering-existing-jobs, not attacker-chosen command execution: the attacker controls when the jobs run and which one runs (via ?job=), but does not control what the jobs do. Code execution follows only when the operator has configured a job that shells out, and even then the attacker controls timing rather than payload. Not a default-install issue: reaching the endpoint requires the separate scheduler-webhook GPM plugin to be installed, scheduler.modern.webhook.enabled to be true (default false), and no webhookToken to be configured; a stock Grav or Grav-Admin install exposes nothing here. |
| NexTor IP Changer is a command-line tool that leverages the Tor network to periodically rotate a user's IP address. Versions prior to 2.0.0 execute privileged system commands using `sudo` and `shell=True` directly inside application logic. In environments where passwordless sudo (`NOPASSWD`) is enabled, privileged commands may execute silently without explicit user confirmation. Version 2.0.0 fixes the issue. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.11, the hidden scan command concatenates attacker-controlled Implementation Guide titles, profile titles, and source references into scan.html without escaping in Scanner.java. As a result, a user who scans an attacker-supplied IG/profile and then opens or publishes the generated local/CI HTML report can trigger stored cross-site scripting, executing attacker-controlled JavaScript in the report's browser context. This issue is fixed in version 6.9.11. |
| Pathling is a set of tools that make it easier to use FHIR and clinical terminology within health data analytics. Prior to version 2.0.0 of Pathling Server, Pathling's bulk-submit operation allows an allowed submitter to supply an explicit `oauthMetadataUrl` parameter that is not validated against `pathling.bulkSubmit.allowableSources`. When present, the bulk-submit OAuth flow trusts metadata and the returned `token_endpoint` from the caller-chosen location, then builds outbound OAuth client authentication directly from the submitter's stored credentials. This is fixed in Pathling Server 2.0.0. |
| Adobe Genuine Software Integrity Service was affected by an Incorrect Authorization vulnerability that could result in a Security feature bypass. An attacker could have leveraged this vulnerability to bypass security measures and gain unauthorized limited write access. Exploitation of this issue did not require user interaction, but required the attacker to have access to the local environment the application is installed on. |
| A vulnerability was detected in HKUDS nanobot up to 0.2.1. The affected element is the function connect_mcp_servers of the file nanobot/agent/tools/mcp.py of the component MCP enabledTools Scope Handler. Performing a manipulation results in improper access controls. The attack is possible to be carried out remotely. The exploit is now public and may be used. Upgrading to version 0.3.0 is sufficient to fix this issue. The patch is named 4436. You should upgrade the affected component. Multiple issues were reported to the project. They reacted with a high level of professionalism and kindness: "Both reports describe the same root cause: MCP resource and prompt wrappers could be registered outside the intended enabledTools scope. The registration boundary was corrected". |
| The Subscriptions for WooCommerce WordPress plugin before 2.0.1 does not verify the user's capability before installing and activating a Subscriptions for WooCommerce WordPress plugin before 2.0.1 from a user-supplied slug through a nonce-protected AJAX action, allowing users with the Shop Manager role (who lack Subscriptions for WooCommerce WordPress plugin before 2.0.1-management capabilities) to install and activate arbitrary Subscriptions for WooCommerce WordPress plugin before 2.0.1, resulting in remote code execution. |
| The Content Views WordPress plugin before 4.5 does not perform a capability check on one of its AJAX actions and does not properly sanitise attacker-supplied data before using it in a SQL query, allowing any authenticated user, including Subscribers, to perform SQL injection attacks. |
| The WP Maps WordPress plugin before 4.9.7 does not perform a capability check in one of its AJAX actions and does not properly validate a user-controlled path before using it in a file inclusion, allowing users with a Subscriber account to include and execute arbitrary existing local PHP files on the server. |
| Consul Community Edition and Consul Enterprise 1.13.0 through 2.0.2 are vulnerable to an unauthenticated denial of service through unbounded connection acceptance on the external gRPC listeners. A remote attacker may exhaust agent file descriptors, goroutines, and memory by opening many incomplete connections, potentially preventing legitimate clients from connecting. This vulnerability, CVE-2026-15972, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.15.0, a crafted PDF can cause large memory consumption when pypdf/_cmap.py function parse_bfrange parses unusually large source-code or destination-string tokens in a font /ToUnicode CMap during text extraction. This issue is fixed in 6.15.0. |
| A vulnerability has been found in HKUDS nanobot up to 0.2.1. This affects the function _download_image_data_url of the file nanobot/providers/image_generation.py of the component Provider-returned Image URL Handler. The manipulation leads to server-side request forgery. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of the patch is 5095. It is recommended to apply a patch to fix this issue. The vendor explains: "We confirm that provider-returned image URLs required the same SSRF protections applied to other network retrieval paths. (...) The patch is currently available on main and is planned for the next patch release, v0.3.1." |
| Improper privilege management in the XML-RPC API of Plesk before 18.0.80, allows an authenticated reseller to obtain an administrative session for the root user account. |
| Consul Community Edition and Consul Enterprise 1.19.1 through 2.0.2 did not enforce the {{session:write}} ACL permission for session deletion operations submitted through the transaction API. An authenticated caller with network access to the Consul server RPC port could delete arbitrary sessions without holding the required permission. This vulnerability, CVE-2026-19016, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| Consul Community Edition and Consul Enterprise 1.17.0 through 2.0.2 are vulnerable to an uncontrolled resource consumption issue in the Connect authorization endpoint that may allow a caller to grow the agent's intention-match cache without bound, defeating the operator's cache-disable configuration. This vulnerability, CVE-2026-190124, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| Consul Community Edition and Consul Enterprise 1.20.1 through 2.0.2 are vulnerable to an L7 intention authorization bypass when a service proxy is configured with a custom public listener. An authenticated mesh workload may reach HTTP paths that are blocked by a path-based deny intention. This vulnerability, CVE-2026-15970, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| Kata Containers is an open source project focusing on a standard implementation of lightweight Virtual Machines (VMs) that perform like containers. Prior to version 4.0.0, kata-runtime is vulnerable to host code execution via an unvalidated configuration path annotation. The runtime accepts an arbitrary io.katacontainers.config_path pod annotation and loads the referenced host TOML file without restriction. As a result, a pod user who can place a file at a host-visible path can supply a configuration that selects an attacker-controlled hypervisor or virtio-fs daemon binary, executing code as root on the host. This issue is fixed in version 4.0.0. |
