| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Insufficiently Protected Credentials vulnerability in Innotim Software Telecommunications and Consulting Trade Ltd. Co. Logsign SIEM allows Retrieve Embedded Sensitive Data.
This issue affects Logsign SIEM: from 6.4.97 before 6.4.114. |
| go-gh is a collection of Go modules to make authoring GitHub CLI extensions easier. A security vulnerability has been identified in versions prior to 2.12.1 where an attacker-controlled GitHub Enterprise Server could result in executing arbitrary commands on a user's machine by replacing HTTP URLs provided by GitHub with local file paths for browsing. In `2.12.1`, `Browser.Browse()` has been enhanced to allow and disallow a variety of scenarios to avoid opening or executing files on the filesystem without unduly impacting HTTP URLs. No known workarounds are available other than upgrading. |
| Insertion of sensitive information into log file in the subsystem for the Intel(R) AMT and Intel(R) Standard Manageability may allow an information disclosure. Network adversary with a privileged user combined with a high complexity attack may enable data exposure. This result may potentially occur via network access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Improper link resolution before file access ('link following') in Windows DHCP Server allows an authorized attacker to elevate privileges locally. |
| Deserialization of untrusted data in Microsoft Office SharePoint allows an authorized attacker to execute code over a network. |
| openssl_encrypt versions before 1.4.0 accept refresh tokens as URL query parameters in keyserver and telemetry server routes. Attackers can extract tokens from server logs, proxy logs, browser history, and HTTP Referer headers to gain unauthorized access. |
| openssl_encrypt (pip) versions <= 1.4.7 contain an information exposure vulnerability where the 'hsm fido2-test' and 'hsm onlykey-test' diagnostic commands unconditionally print the full derived hardware pepper as hex to stdout/stderr (crypt_cli.py, handle_hsm_command). The printed value can persist in terminal scrollback, session recordings, or CI logs. Impact is limited because the pepper is derived from a random per-invocation test salt and is salt-bound, so the leaked value cannot be used to decrypt real files. A related plugin issue logged raw prf_data outside the secret-redaction path. Fixed in 1.4.8 (and 1.5.0) by removing the hex dumps and routing plugin debug output through the redaction layer. |
| The vulnerability, if exploited, could allow an authenticated miscreant
with "DNA Authority - Operator" privilege to tamper with serialized
data, potentially resulting in code execution during deserialization
under the privilege of Enterprise SCADA security group "DNA Apps". |
| PAX Technology Q80 AIP File Parsing Link Following Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of PAX Technology Q80. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the parsing of AIP files. By creating a symbolic link, an attacker can abuse the installer process to write arbitrary files. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-30583. |
| Exposure of data element to wrong session vulnerability in the JSON plugin of Apache Struts. Per-response serialization state could be shared across concurrent requests, allowing response content associated with one request to become observable in another. Only the SMD / JSON-RPC handling of the JSON interceptor is affected, which is not enabled by default; applications using the json result type are not affected.
This issue affects Apache Struts: 7.2.1.
Users are recommended to upgrade to version 7.3.0, which fixes the issue. |
| The Turnkey bbPress by WeaverTheme plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 1.7.1 via deserialization of untrusted input in the wvrbbp_set_to_serialized_values() function (reached through the wvrbbp_save_restore() settings-restore handler). The function reads the raw contents of an administrator-uploaded file and passes them directly to unserialize() without any validation. This makes it possible for authenticated attackers, with administrator-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable plugin itself; however, if a POP chain is present via an additional plugin or theme installed on the target system, it could allow the attacker to delete arbitrary files, retrieve sensitive data, or execute code. |
| OpenTofu before 1.11.7 fails to validate existing symlinks in the provider cache directory during initialization. Attackers can place a malicious symlink in a trusted working directory to cause tofu init to write provider package contents to arbitrary filesystem locations outside the working tree. |
| The Podlove Podcast Publisher plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the create_link_item function in all versions up to, and including, 4.5.3. This makes it possible for authenticated attackers, with contributor-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). A viable POP chain exists within the plugin itself via Podlove\ImageCache\GenerationGuard, whose __destruct() method invokes wp_delete_file() with an attacker-controlled file path populated through unserialization. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Proper rollback if the ioremap fails
bnxt_qplib_alloc_dpi returns success even if ioremap fails.
Add the proper rollback when the ioremap fails and return
-ENOMEM status. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: core: regulator_lock_two() should test for EDEADLK not EDEADLOCK
Compare against -EDEADLK, which is what ww_mutex_lock() actually
returns and what every other deadlock check in this file already uses.
Function regulator_lock_two() acquires two regulators via
regulator_lock_nested() -> ww_mutex_lock(). On contention,
ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop
the lock it holds and retry the acquisition in the canonical order.
However, regulator_lock_two() tests the return value against -EDEADLOCK
rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are
the same value, so the comparison happens to be correct and the bug is
invisible. But on MIPS, SPARC, and PowerPC, those two errors have
different values. The test is wrong: a genuine -EDEADLK backoff no
longer matches -EDEADLOCK, so instead of unlocking and retrying, the
code falls into WARN_ON(ret) and returns with only one of the two
regulators locked.
In practice, this is a bug only on MIPS, because the regulator core is
not built or used on the other two platforms.
In general, EDEADLK is preferred over EDEADLOCK for new code. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: avoid request storms during pending request
batadv_send_tt_request() allocates a tt_req_node when none exists for the
destination originator node. This should prevent that a multiple TT
requests are send at the same time to an originator.
But if allocation of the send buffer failed, this request must be cleaned
up again. But indicator for such a failure is "ret == false". But the
actual implementation is checking for "ret == true".
The check must be inverted to not loose the information about the TT
request directly after it was attempted to be sent out. This should avoid
potential request storms. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: imx: reconfigure for PIO when DMA cannot be started
When spi_imx_can_dma() selects DMA, the ECSPI is configured for DMA:
spi_imx_setupxfer() sets CTRL.SMC and clears dynamic_burst, and
spi_imx_dma_transfer() programs the dynamic-burst BURST_LENGTH and the
SDMA watermarks.
If the DMA descriptor cannot be prepared (dmaengine_prep_slave_single()
returns NULL), the transfer is failed with SPI_TRANS_FAIL_NO_START and
falls back to PIO. The dynamic-burst DMA path uses its own bounce
buffers instead of the SPI core's mapping, so xfer->{tx,rx}_sg_mapped
are not set and the core's DMA->PIO retry is skipped; the driver falls
back to PIO internally. But none of the DMA-mode configuration is
undone, so the PIO transfer runs with CTRL.SMC set, the wrong burst
length and dynamic_burst cleared, and the transferred data is corrupted.
This is easily hit on i.MX8MP boards that describe ECSPI DMA in the
device tree but run SDMA on ROM firmware (no external sdma-imx7d.bin):
every ECSPI DMA prepare fails. An Infineon SLB9670 TPM on ECSPI1 then
returns shifted TPM2_GetCapability data, is flagged "field failure
mode", /dev/tpmrm0 is never created.
Set controller->fallback before re-running spi_imx_setupxfer() so the
ECSPI is reconfigured exactly like a normal PIO transfer. With
controller->fallback set, spi_imx_setupxfer() sees spi_imx_can_dma()
return false, so it clears spi_imx->usedma and reprograms the controller
(clears CTRL.SMC, restores dynamic_burst and the PIO burst length). No
explicit spi_imx->usedma = false is needed: setupxfer() already updates
it from the can_dma() result. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix use-after-free during unmount
During unmount or failure teardown all mon_data structures that contain
monitoring event file private data are freed after which kernfs nodes are
removed. However, the RDT_DELETED flag is never set for the statically
allocated default resource group.
A concurrent reader of an event file associated with the default resource
group may, after dropping kernfs active protection, block on rdtgroup_mutex
while unmount proceeds to free the file private data and destroy the kernfs
node without waiting for the reader.
When the mutex is released, the reader wakes up, observes that RDT_DELETED
is not set for the default group, and dereferences the already-freed
file private data.
The scenario can be depicted as follows:
CPU0 CPU1
/*
* Default resource group's
* monitoring data accessible via
* kernfs file with kernfs_node::priv
* pointing to a struct mon_data.
* User opens the file for reading.
*/
rdtgroup_mondata_show() /* arch encounters fatal error */
rdtgroup_kn_lock_live() resctrl_exit()
atomic_inc(&rdtgroup_default.waitcount) cpus_read_lock()
kernfs_break_active_protection(kn) mutex_lock(&rdtgroup_mutex)
cpus_read_lock() resctrl_fs_teardown()
mutex_lock(&rdtgroup_mutex) rmdir_all_sub()
mon_put_kn_priv()
/* Delete all mon_data structures */
rdtgroup_destroy_root()
kernfs_destroy_root()
rdtgroup_default.kn = NULL
mutex_unlock(&rdtgroup_mutex)
/*
* rdtgroup_default.flags is empty so
* rdtgroup_kn_lock_live() returns
* &rdtgroup_default
*/
md = of->kn->priv;
/* md points to freed mon_data */
Set RDT_DELETED for the default group unconditionally since the flag does
not lead to the freeing of this statically allocated group.
Do not allow a new resctrl mount if there are any waiters on default group
of previous mount. A new mount will re-initialize the default group that
would appear to waiters from previous mount as though the default group is
accessible causing them to access the mon_data structures from the previous
mount that have been removed. |
| A security vulnerability has been detected in SourceCodester Best Employee Management System 1.0. This affects an unknown function of the file /assets/uploadImage/Profile/. Such manipulation leads to exposure of information through directory listing. It is possible to launch the attack remotely. |
| Deserialization of untrusted data in Microsoft High Performance Computing (HPC) Pack allows an unauthorized attacker to execute code over a network. |
