| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Unrestricted Upload of File with Dangerous Type vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote Code Execution. |
| A vulnerability was detected in SourceCodester Simple Doctors Appointment System 1.0. This issue affects the function save_doctor of the file /save_file.php. The manipulation results in unrestricted upload. The attack can be executed remotely. The exploit is now public and may be used. |
| Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Unrestricted Upload of File with Dangerous Type vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote Code Execution. |
| fast-uri versions 2.3.1 through 3.1.2 and 4.0.0 fail to canonicalize Unicode (IDN) hostnames for HTTP-family URLs. The IDN conversion path calls a helper that does not exist on the global URL constructor, silently leaving the host in its original Unicode form while normalize() and equal() still return values that differ from a WHATWG-compatible URL parser. Applications that use fast-uri to enforce host-based policy (denylists, loopback filtering, redirect validation, outbound proxy routing) before passing the same URL to Node's URL or fetch can be bypassed when the two implementations resolve the same input to different hosts. Patches: upgrade to fast-uri 3.1.3 for the 3.x line or 4.0.1 for the 4.x line. Workarounds: enforce host policy using the same URL parser used for the actual request, or reject non-ASCII hosts before policy checks. |
| WebErpMesv2 is a Resource Management and Manufacturing execution system Web for industry. Versions 1.19 and prior allow any self-registered user to upload arbitrary PHP files through the HR Expense scan_file parameter, leading to Remote Code Execution. Combined with open registration (no invite required) and broken role middleware (CheckUserRole silently swallows RouteNotFoundException), this chain is effectively unauthenticated RCE against any default installation. The issue is patched in commit 5c54862fa044b363fd2be03d586750e81afd6818. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix Rx queue stall on alloc failure
When the system is under extreme memory pressure, page allocations can
fail during the Rx buffer refill loop. If the number of buffers posted
to hardware falls below a critical low threshold and the refill loop
exits due to allocation failures, the queue can stall:
1. The device drops incoming packets because there are no descriptors.
2. Since no packets are processed, no Rx completions are generated.
3. Because no completions occur, NAPI is never scheduled, preventing
the refill loop from running again even after memory is freed.
This results in a permanent queue stall.
Resolve this by introducing a starvation recovery timer for each Rx queue.
If the number of buffers posted to hardware falls below a critical low
threshold, start a timer to periodically reschedule NAPI. Once NAPI runs
and successfully refills the queue above the threshold, the timer is
not rescheduled.
The threshold is set to 32 because a single maximum-sized Receive Segment
Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path.
Lower thresholds (such as 8 or 16) would be insufficient to process a
complete maximum-sized RSC packet, risking packet drops or unexpected
hardware behavior under memory pressure. Setting the threshold to 32
guarantees a safe margin to handle at least one full RSC packet. |
| In the Linux kernel, the following vulnerability has been resolved:
rtase: Workaround for TX hang caused by hardware packet parsing
The hardware performs packet parsing before packet transmission.
Parsing incomplete IPv4, IPv6, TCP, or UDP headers may trigger a TX
hang because the hardware parser expects additional protocol header
data that is not present in the packet.
The hardware performs additional PTP parsing on UDP packets identified
by destination ports 319/320 at the expected UDP destination port
offset.
If such a packet has transport data smaller than RTASE_MIN_PAD_LEN,
the hardware parser expects additional packet data and may trigger a
TX hang.
To avoid these hardware issues, the driver applies the following
workarounds.
Drop malformed packets that may trigger this hardware issue before
transmission.
For IPv4 non-initial fragments, the hardware does not check the
fragment offset before parsing the expected transport header location.
As a result, these packets are still subject to transport header
parsing even though they do not contain a transport header. If the
transport data is shorter than the minimum transport header required
by the hardware parser, pad the transport data to the minimum
transport header length required by the hardware parser. Packets that
also match the hardware PTP parsing conditions continue to follow the
corresponding workaround.
For IPv6 fragmented packets, neither of the above hardware issues
occurs because the hardware only continues packet parsing when the
IPv6 Base Header Next Header field directly indicates UDP. Packets
carrying a Fragment Header do not continue through the subsequent
packet parsing stages.
For packets identified for hardware PTP parsing, pad the transport
data so it reaches RTASE_MIN_PAD_LEN before transmission. |
| Release attachment extension allowlist bypass via web release edit form (variant of CVE-2025-68939) |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to bypass security restrictions due to an interpretation conflict in the multipart parser. |
| Apache Airflow's Backfill API authorized a request against a Dag id supplied by the caller whenever the `backfill_id` path segment failed to parse. The authorization dependency parsed it with `int()` while the route handler parsed it as pydantic's `NonNegativeInt`, which accepts values `int()` rejects (`1.0` coerces to `1`); FastAPI resolves dependencies before endpoint validation, so the two acted on different Dags. An authenticated user holding edit permission on any single Dag could therefore read, pause and cancel backfills belonging to any other Dag, including moving another Dag's queued runs to `failed`. No non-default configuration is required and backfill ids are sequential, so finding a target is trivial. Users are advised to upgrade to apache-airflow 3.3.1 or later, which parses the backfill id with the same type the routes declare. |
| Network-AI ClaudeHookBridge before 5.15.1 truncates the target string to 500 characters before evaluating denyPatterns, while Claude Code executes the full untruncated command. Attackers can position dangerous content past byte 500 in a Bash command field to bypass the operator's hard-deny list and execute arbitrary commands. |
| fast-uri normalize() decoded percent-encoded authority delimiters inside the host component and then re-emitted them as raw delimiters during serialization. A host that combined an allowed domain, an encoded at-sign, and a different domain was re-emitted with the at-sign as a raw userinfo separator, changing the URI's authority to the second domain. Applications that normalize untrusted URLs before host allowlist checks, redirect validation, or outbound request routing can be steered to a different authority than the input appeared to specify. Versions <= 3.1.1 are affected. Update to 3.1.2 or later. |
| @cedar-policy/authorization-for-expressjs is an open-source Express.js middleware that integrates Cedar authorization into Express applications by mapping HTTP requests to Cedar actions and evaluating authorization policies before allowing requests to proceed. Versions prior to 0.3.0 have an issue where, under certain circumstances, the middleware matches incoming requests against Cedar action mappings using req.originalUrl, which includes the query string, while Express routes requests using only the path component. The middleware uses req.originalUrl to match incoming requests against Cedar action mappings. In Express, req.originalUrl includes the query string, while route matching uses only the path. This creates a divergence between what Cedar authorizes and what Express executes. When an application defines separate actions for overlapping path prefixes with different authorization requirements (for example, GET /users for listing all users with admin-only access, and GET /users/{id} for retrieving a single user with any authenticated user access), an actor can append a query string to bypass the more restrictive policy. Sending GET /users/?x=1 causes the middleware to match against /users/{id} (with id parameter set to ?x=1) and evaluate the less restrictive action, while Express routes the request to the /users list handler. This allows inappropriate access to the more restrictive endpoint. This issue has been addressed in version 0.30. Some workarounds are available. Validate and sanitize incoming request paths before they reach the authorization middleware. Ensure that applications do not rely solely on the middleware for authorization when defining multiple actions on overlapping path prefixes with different permission levels. |
| Network-AI versions before 5.15.1 contain a security matcher bypass vulnerability where SandboxPolicy evaluates raw command strings with quotes preserved while the executor tokenizes commands by stripping quotes before execution. Attackers can craft quoted commands that evade blocklist checks and approval gates while the executor runs the identical unquoted dangerous argv. |
| The WooCommerce Subscriptions WordPress plugin before 9.1.0 does not validate user input before unserializing it on stores with High-Performance Order Storage enabled, leading to a PHP Object Injection issue which unauthenticated users can escalate to Remote Code Execution via a gadget chain present in the bundled dependencies. |
| In WhatsUp Gold versions released before 2026.0.2, a privileged attacker can create a LogToFile action specifying an arbitrary file extension within the IIS web root. |
| An unrestricted file upload vulnerability in Cockpit CMS 2.6.0 allows authenticated users to upload files of any extension including PHP scripts via the asset upload endpoint. The allowed_uploads configuration defaults to wildcard (*) and uploaded files are stored in a web-accessible directory. An attacker with any authenticated account can upload a PHP webshell and execute arbitrary OS commands on the server. |
| The InstaWP Connect – 1-click WP Staging & Migration plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 0.1.3.6 via the (top-level script) function. This is due to the plugin stores its encrypted options file as options-{migrate_key}.txt in wp-content/instawpbackups/ without deploying an index.php or .htaccess to prevent directory listing, exposing the 40-character migrate_key on Apache servers with directory indexing enabled, which allows an attacker to derive the AES-256-CBC passphrase via SHA256(migrate_key), decrypt the options file to recover the api_signature. This makes it possible for unauthenticated attackers to get the database access details and api_signature. Exploitation requires the target WordPress site to be hosted on Apache with directory listing enabled (Options +Indexes) for the wp-content/instawpbackups/ directory, and time limited because it can only be exploited during the migration period. |
| Malcolm is a network traffic analysis tool suite. The file-upload component (FilePond PHP backend) accepts uploads at `POST /server/php/submit.php` and stores them in a directory served by the same nginx and php-fpm instance. The allow-list that should restrict accepted file types is an empty array by default (`file-upload/php/config.php:16`), so the type check is a no-op and every extension is accepted. The filename sanitizer keeps the `.php` extension intact. Committed files land in `/var/www/upload/server/php/files` (`file-upload/php/config.php:7`), and the component's nginx routes any URL ending in `.php` to php-fpm. An authenticated `GET /server/php/files/<name>.php` then executes the uploaded code as `www-data`. Prior to version 26.06.1, in RBAC mode, the upload endpoint is reachable by the granular `ROLE_UPLOAD` role (`nginx/lua/nginx_auth_helpers.lua:71`), a role intended only for submitting capture files. As a result, a user holding the upload-only role runs arbitrary PHP as `www-data` inside the file-upload container. Version 26.06.1 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: sata_dwc_460ex: enable SATA interrupts only after IRQ handler is registered
sata_dwc_enable_interrupts() is called before platform_get_irq() and
ata_host_activate(), leaving the SATA controller's interrupt mask
enabled without a registered handler. If a later step fails (irq
request, phy init, etc.) or if the controller asserts an interrupt
during probe, the irq line may fire with no handler, causing a
spurious interrupt storm.
Move sata_dwc_enable_interrupts() after ata_host_activate() so that
interrupts are only unmasked once the handler is registered and the
core is fully initialized. |
