| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Due to multiple time-of-check time-of-use race conditions in the resource count check and increment logic, as well as missing validations, users of the platform are able to exceed the allocation limits configured for their accounts/domains. This can be used by an attacker to degrade the infrastructure's resources and lead to denial of service conditions.
Users are recommended to upgrade to Apache CloudStack versions 4.20.3.0 or 4.22.0.1, or later, which fixes this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: proximity: hx9023s: Protect against division by zero in set_samp_freq
Avoid division by zero when sampling frequency is unspecified. |
| In the Linux kernel, the following vulnerability has been resolved:
nouveau/dpcd: return EBUSY for aux xfer if the device is asleep
If we have runtime suspended, and userspace wants to use /dev/drm_dp_*
then just tell it the device is busy instead of crashing in the GSP
code.
WARNING: CPU: 2 PID: 565741 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/rm/r535/rpc.c:164 r535_gsp_msgq_wait+0x9a/0xb0 [nouveau]
CPU: 2 UID: 0 PID: 565741 Comm: fwupd Not tainted 6.18.10-200.fc43.x86_64 #1 PREEMPT(lazy)
Hardware name: LENOVO 20QTS0PQ00/20QTS0PQ00, BIOS N2OET65W (1.52 ) 08/05/2024
RIP: 0010:r535_gsp_msgq_wait+0x9a/0xb0 [nouveau]
This is a simple fix to get backported. We should probably engineer a
proper power domain solution to wake up devices and keep them awake
while fw updates are happening. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Fix kthread worker destruction in polling mode
Fix the cleanup order in polling mode (irq < 0) to prevent kernel warnings
during module removal. Cancel the hrtimer before destroying the kthread
worker to ensure work queues are empty.
In polling mode, the driver uses hrtimer to periodically trigger
wave5_vpu_timer_callback() which queues work via kthread_queue_work().
The kthread_destroy_worker() function validates that both work queues
are empty with WARN_ON(!list_empty(&worker->work_list)) and
WARN_ON(!list_empty(&worker->delayed_work_list)).
The original code called kthread_destroy_worker() before hrtimer_cancel(),
creating a race condition where the timer could fire during worker
destruction and queue new work, triggering the WARN_ON.
This causes the following warning on every module unload in polling mode:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1034 at kernel/kthread.c:1430
kthread_destroy_worker+0x84/0x98
Modules linked in: wave5(-) rpmsg_ctrl rpmsg_char ...
Call trace:
kthread_destroy_worker+0x84/0x98
wave5_vpu_remove+0xc8/0xe0 [wave5]
platform_remove+0x30/0x58
...
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix SError in ufshcd_rtc_work() during UFS suspend
In __ufshcd_wl_suspend(), cancel_delayed_work_sync() is called to cancel
the UFS RTC work, but it is placed after ufshcd_vops_suspend(hba, pm_op,
POST_CHANGE). This creates a race condition where ufshcd_rtc_work() can
still be running while ufshcd_vops_suspend() is executing. When
UFSHCD_CAP_CLK_GATING is not supported, the condition
!hba->clk_gating.active_reqs is always true, causing ufshcd_update_rtc()
to be executed. Since ufshcd_vops_suspend() typically performs clock
gating operations, executing ufshcd_update_rtc() at that moment triggers
an SError. The kernel panic trace is as follows:
Kernel panic - not syncing: Asynchronous SError Interrupt
Call trace:
dump_backtrace+0xec/0x128
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xa0
dump_stack+0x18/0x24
panic+0x148/0x374
nmi_panic+0x3c/0x8c
arm64_serror_panic+0x64/0x8c
do_serror+0xc4/0xc8
el1h_64_error_handler+0x34/0x4c
el1h_64_error+0x68/0x6c
el1_interrupt+0x20/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
ktime_get+0xc4/0x12c
ufshcd_mcq_sq_stop+0x4c/0xec
ufshcd_mcq_sq_cleanup+0x64/0x1dc
ufshcd_clear_cmd+0x38/0x134
ufshcd_issue_dev_cmd+0x298/0x4d0
ufshcd_exec_dev_cmd+0x1a4/0x1c4
ufshcd_query_attr+0xbc/0x19c
ufshcd_rtc_work+0x10c/0x1c8
process_scheduled_works+0x1c4/0x45c
worker_thread+0x32c/0x3e8
kthread+0x120/0x1d8
ret_from_fork+0x10/0x20
Fix this by moving cancel_delayed_work_sync() before the call to
ufshcd_vops_suspend(hba, pm_op, PRE_CHANGE), ensuring the UFS RTC work is
fully completed or cancelled at that point. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix i_nlink underrun during async unlink
During async unlink, we drop the `i_nlink` counter before we receive
the completion (that will eventually update the `i_nlink`) because "we
assume that the unlink will succeed". That is not a bad idea, but it
races against deletions by other clients (or against the completion of
our own unlink) and can lead to an underrun which emits a WARNING like
this one:
WARNING: CPU: 85 PID: 25093 at fs/inode.c:407 drop_nlink+0x50/0x68
Modules linked in:
CPU: 85 UID: 3221252029 PID: 25093 Comm: php-cgi8.1 Not tainted 6.14.11-cm4all1-ampere #655
Hardware name: Supermicro ARS-110M-NR/R12SPD-A, BIOS 1.1b 10/17/2023
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drop_nlink+0x50/0x68
lr : ceph_unlink+0x6c4/0x720
sp : ffff80012173bc90
x29: ffff80012173bc90 x28: ffff086d0a45aaf8 x27: ffff0871d0eb5680
x26: ffff087f2a64a718 x25: 0000020000000180 x24: 0000000061c88647
x23: 0000000000000002 x22: ffff07ff9236d800 x21: 0000000000001203
x20: ffff07ff9237b000 x19: ffff088b8296afc0 x18: 00000000f3c93365
x17: 0000000000070000 x16: ffff08faffcbdfe8 x15: ffff08faffcbdfec
x14: 0000000000000000 x13: 45445f65645f3037 x12: 34385f6369706f74
x11: 0000a2653104bb20 x10: ffffd85f26d73290 x9 : ffffd85f25664f94
x8 : 00000000000000c0 x7 : 0000000000000000 x6 : 0000000000000002
x5 : 0000000000000081 x4 : 0000000000000481 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff08727d3f91e8
Call trace:
drop_nlink+0x50/0x68 (P)
vfs_unlink+0xb0/0x2e8
do_unlinkat+0x204/0x288
__arm64_sys_unlinkat+0x3c/0x80
invoke_syscall.constprop.0+0x54/0xe8
do_el0_svc+0xa4/0xc8
el0_svc+0x18/0x58
el0t_64_sync_handler+0x104/0x130
el0t_64_sync+0x154/0x158
In ceph_unlink(), a call to ceph_mdsc_submit_request() submits the
CEPH_MDS_OP_UNLINK to the MDS, but does not wait for completion.
Meanwhile, between this call and the following drop_nlink() call, a
worker thread may process a CEPH_CAP_OP_IMPORT, CEPH_CAP_OP_GRANT or
just a CEPH_MSG_CLIENT_REPLY (the latter of which could be our own
completion). These will lead to a set_nlink() call, updating the
`i_nlink` counter to the value received from the MDS. If that new
`i_nlink` value happens to be zero, it is illegal to decrement it
further. But that is exactly what ceph_unlink() will do then.
The WARNING can be reproduced this way:
1. Force async unlink; only the async code path is affected. Having
no real clue about Ceph internals, I was unable to find out why the
MDS wouldn't give me the "Fxr" capabilities, so I patched
get_caps_for_async_unlink() to always succeed.
(Note that the WARNING dump above was found on an unpatched kernel,
without this kludge - this is not a theoretical bug.)
2. Add a sleep call after ceph_mdsc_submit_request() so the unlink
completion gets handled by a worker thread before drop_nlink() is
called. This guarantees that the `i_nlink` is already zero before
drop_nlink() runs.
The solution is to skip the counter decrement when it is already zero,
but doing so without a lock is still racy (TOCTOU). Since
ceph_fill_inode() and handle_cap_grant() both hold the
`ceph_inode_info.i_ceph_lock` spinlock while set_nlink() runs, this
seems like the proper lock to protect the `i_nlink` updates.
I found prior art in NFS and SMB (using `inode.i_lock`) and AFS (using
`afs_vnode.cb_lock`). All three have the zero check as well. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: renesas_usbhs: fix use-after-free in ISR during device removal
In usbhs_remove(), the driver frees resources (including the pipe array)
while the interrupt handler (usbhs_interrupt) is still registered. If an
interrupt fires after usbhs_pipe_remove() but before the driver is fully
unbound, the ISR may access freed memory, causing a use-after-free.
Fix this by calling devm_free_irq() before freeing resources. This ensures
the interrupt handler is both disabled and synchronized (waits for any
running ISR to complete) before usbhs_pipe_remove() is called. |
| FastGPT is an AI Agent building platform. In versions 4.14.11 and prior, FastGPT's isInternalAddress() function in packages/service/common/system/utils.ts is vulnerable to DNS rebinding (TOCTOU — Time-of-Check to Time-of-Use). The function resolves the hostname via dns.resolve4()/dns.resolve6() and checks resolved IPs against private ranges, but the actual HTTP request happens in a separate call with a new DNS resolution, allowing the DNS record to change between validation and fetch. At time of publication, there are no publicly available patches. |
| n8n-MCP is an MCP server that provides AI assistants access to n8n node documentation, properties, and operations. From version 2.18.7 to before version 2.50.2, there is an authenticated server-side request forgery vulnerability affecting the webhook trigger tools, the n8n API client (N8N_API_URL), and per-request URLs supplied via the x-n8n-url header in multi-tenant HTTP mode. This issue has been patched in version 2.50.2. |
| FlashMQ is a MQTT broker/server, designed for multi-CPU environments. Prior to version 1.26.1, a remote client with retained publish permission can crash the FlashMQ broker when both set_retained_message_defer_timeout and set_retained_message_defer_timeout_spread are configured to non-default values, resulting in denial of service. If anonymous retained publishing is allowed, no authentication is required; otherwise, the attacker needs the corresponding publish permission. This issue has been patched in version 1.26.1. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Fix device cleanup order to prevent kernel panic
Move video device unregistration to the beginning of the remove function
to ensure all video operations are stopped before cleaning up the worker
thread and disabling PM runtime. This prevents hardware register access
after the device has been powered down.
In polling mode, the hrtimer periodically triggers
wave5_vpu_timer_callback() which queues work to the kthread worker.
The worker executes wave5_vpu_irq_work_fn() which reads hardware
registers via wave5_vdi_read_register().
The original cleanup order disabled PM runtime and powered down hardware
before unregistering video devices. When autosuspend triggers and powers
off the hardware, the video devices are still registered and the worker
thread can still be triggered by the hrtimer, causing it to attempt
reading registers from powered-off hardware. This results in a bus error
(synchronous external abort) and kernel panic.
This causes random kernel panics during encoding operations:
Internal error: synchronous external abort: 0000000096000010
[#1] PREEMPT SMP
Modules linked in: wave5 rpmsg_ctrl rpmsg_char ...
CPU: 0 UID: 0 PID: 1520 Comm: vpu_irq_thread
Tainted: G M W
pc : wave5_vdi_read_register+0x10/0x38 [wave5]
lr : wave5_vpu_irq_work_fn+0x28/0x60 [wave5]
Call trace:
wave5_vdi_read_register+0x10/0x38 [wave5]
kthread_worker_fn+0xd8/0x238
kthread+0x104/0x120
ret_from_fork+0x10/0x20
Code: aa1e03e9 d503201f f9416800 8b214000 (b9400000)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: synchronous external abort:
Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fix potential zero beacon interval in beacon tracking
During fuzz testing, it was discovered that bss_conf->beacon_int
might be zero, which could result in a division by zero error in
subsequent calculations. Set a default value of 100 TU if the
interval is zero to ensure stability. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_tcm: Fix NULL pointer dereferences in nexus handling
The `tpg->tpg_nexus` pointer in the USB Target driver is dynamically
managed and tied to userspace configuration via ConfigFS. It can be
NULL if the USB host sends requests before the nexus is fully
established or immediately after it is dropped.
Currently, functions like `bot_submit_command()` and the data
transfer paths retrieve `tv_nexus = tpg->tpg_nexus` and immediately
dereference `tv_nexus->tvn_se_sess` without any validation. If a
malicious or misconfigured USB host sends a BOT (Bulk-Only Transport)
command during this race window, it triggers a NULL pointer
dereference, leading to a kernel panic (local DoS).
This exposes an inconsistent API usage within the module, as peer
functions like `usbg_submit_command()` and `bot_send_bad_response()`
correctly implement a NULL check for `tv_nexus` before proceeding.
Fix this by bringing consistency to the nexus handling. Add the
missing `if (!tv_nexus)` checks to the vulnerable BOT command and
request processing paths, aborting the command gracefully with an
error instead of crashing the system. |
| The socket connection handler in aswArPot.sys in the Avast and AVG Windows Anti Rootkit driver before 22.1 allows local attackers to execute arbitrary code in kernel mode or cause a denial of service (memory corruption and OS crash) due to a double fetch vulnerability at aswArPot+0xc4a3. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: dummy-hcd: Fix interrupt synchronization error
This fixes an error in synchronization in the dummy-hcd driver. The
error has a somewhat involved history. The synchronization mechanism
was introduced by commit 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous
synchronization change"), which added an emulated "interrupts enabled"
flag together with code emulating synchronize_irq() (it waits until
all current handler callbacks have returned).
But the emulated interrupt-disable occurred too late, after the driver
containing the handler callback routines had been told that it was
unbound and no more callbacks would occur. Commit 4a5d797a9f9c ("usb:
gadget: dummy_hcd: fix gpf in gadget_setup") tried to fix this by
moving the synchronize_irq() emulation code from dummy_stop() to
dummy_pullup(), which runs before the unbind callback.
There still were races, though, because the emulated interrupt-disable
still occurred too late. It couldn't be moved to dummy_pullup(),
because that routine can be called for reasons other than an impending
unbind. Therefore commits 7dc0c55e9f30 ("USB: UDC core: Add
udc_async_callbacks gadget op") and 04145a03db9d ("USB: UDC: Implement
udc_async_callbacks in dummy-hcd") added an API allowing the UDC core
to tell dummy-hcd exactly when emulated interrupts and their callbacks
should be disabled.
That brings us to the current state of things, which is still wrong
because the emulated synchronize_irq() occurs before the emulated
interrupt-disable! That's no good, beause it means that more emulated
interrupts can occur after the synchronize_irq() emulation has run,
leading to the possibility that a callback handler may be running when
the gadget driver is unbound.
To fix this, we have to move the synchronize_irq() emulation code yet
again, to the dummy_udc_async_callbacks() routine, which takes care of
enabling and disabling emulated interrupt requests. The
synchronization will now run immediately after emulated interrupts are
disabled, which is where it belongs. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix SCX_KICK_WAIT deadlock by deferring wait to balance callback
SCX_KICK_WAIT busy-waits in kick_cpus_irq_workfn() using
smp_cond_load_acquire() until the target CPU's kick_sync advances. Because
the irq_work runs in hardirq context, the waiting CPU cannot reschedule and
its own kick_sync never advances. If multiple CPUs form a wait cycle, all
CPUs deadlock.
Replace the busy-wait in kick_cpus_irq_workfn() with resched_curr() to
force the CPU through do_pick_task_scx(), which queues a balance callback
to perform the wait. The balance callback drops the rq lock and enables
IRQs following the sched_core_balance() pattern, so the CPU can process
IPIs while waiting. The local CPU's kick_sync is advanced on entry to
do_pick_task_scx() and continuously during the wait, ensuring any CPU that
starts waiting for us sees the advancement and cannot form cyclic
dependencies. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Wait for RCU readers during policy netns exit
xfrm_policy_fini() frees the policy_bydst hash tables after flushing the
policy work items and deleting all policies, but it does not wait for
concurrent RCU readers to leave their read-side critical sections first.
The policy_bydst tables are published via rcu_assign_pointer() and are
looked up through rcu_dereference_check(), so netns teardown must also
wait for an RCU grace period before freeing the table memory.
Fix this by adding synchronize_rcu() before freeing the policy hash tables. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Flush exception handling work when RPM level is zero
Ensure that the exception event handling work is explicitly flushed during
suspend when the runtime power management level is set to UFS_PM_LVL_0.
When the RPM level is zero, the device power mode and link state both
remain active. Previously, the UFS core driver bypassed flushing exception
event handling jobs in this configuration. This created a race condition
where the driver could attempt to access the host controller to handle an
exception after the system had already entered a deep power-down state,
resulting in a system crash.
Explicitly flush this work and disable auto BKOPs before the suspend
callback proceeds. This guarantees that pending exception tasks complete
and prevents illegal hardware access during the power-down sequence. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix sync handling in amdgpu_dma_buf_move_notify
Invalidating a dmabuf will impact other users of the shared BO.
In the scenario where process A moves the BO, it needs to inform
process B about the move and process B will need to update its
page table.
The commit fixes a synchronisation bug caused by the use of the
ticket: it made amdgpu_vm_handle_moved behave as if updating
the page table immediately was correct but in this case it's not.
An example is the following scenario, with 2 GPUs and glxgears
running on GPU0 and Xorg running on GPU1, on a system where P2P
PCI isn't supported:
glxgears:
export linear buffer from GPU0 and import using GPU1
submit frame rendering to GPU0
submit tiled->linear blit
Xorg:
copy of linear buffer
The sequence of jobs would be:
drm_sched_job_run # GPU0, frame rendering
drm_sched_job_queue # GPU0, blit
drm_sched_job_done # GPU0, frame rendering
drm_sched_job_run # GPU0, blit
move linear buffer for GPU1 access #
amdgpu_dma_buf_move_notify -> update pt # GPU0
It this point the blit job on GPU0 is still running and would
likely produce a page fault. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: dummy-hcd: Fix locking/synchronization error
Syzbot testing was able to provoke an addressing exception and crash
in the usb_gadget_udc_reset() routine in
drivers/usb/gadgets/udc/core.c, resulting from the fact that the
routine was called with a second ("driver") argument of NULL. The bad
caller was set_link_state() in dummy_hcd.c, and the problem arose
because of a race between a USB reset and driver unbind.
These sorts of races were not supposed to be possible; commit
7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"),
along with a few followup commits, was written specifically to prevent
them. As it turns out, there are (at least) two errors remaining in
the code. Another patch will address the second error; this one is
concerned with the first.
The error responsible for the syzbot crash occurred because the
stop_activity() routine will sometimes drop and then re-acquire the
dum->lock spinlock. A call to stop_activity() occurs in
set_link_state() when handling an emulated USB reset, after the test
of dum->ints_enabled and before the increment of dum->callback_usage.
This allowed another thread (doing a driver unbind) to sneak in and
grab the spinlock, and then clear dum->ints_enabled and dum->driver.
Normally this other thread would have to wait for dum->callback_usage
to go down to 0 before it would clear dum->driver, but in this case it
didn't have to wait since dum->callback_usage had not yet been
incremented.
The fix is to increment dum->callback_usage _before_ calling
stop_activity() instead of after. Then the thread doing the unbind
will not clear dum->driver until after the call to
usb_gadget_udc_reset() safely returns and dum->callback_usage has been
decremented again. |
