| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A heap-based buffer overflow vulnerability exists in the GIMP DDS (DirectDraw Surface) file parser. When a crafted DDS file declares a D3D9 pixel format but sets a lower bits-per-pixel (bpp) value in the header, the loader allocates an undersized heap buffer. Subsequent pixel data consumption at the real format's stride causes a write past the heap buffer boundary, leading to heap metadata corruption and potential code execution. |
| node-re2 provides RE2 regular expression bindings for Node.js. Prior to version 1.25.1, the WrappedRE2::Replace function built its replacement result and passed it to V8 using ToLocalChecked without checking for the empty MaybeLocal that V8 returns when the resulting string or buffer exceeds V8's maximum string length. When a global replace uses an output amplifying replacement template, the result can grow quadratically with the input size, and once the result exceeds V8's maximum string length, the unchecked ToLocalChecked call causes a fatal, uncatchable process abort instead of a catchable exception. This issue is fixed in version 1.25.1. |
| A heap-buffer-overflow vulnerability exists in the APNG (Animated PNG) file loader of GIMP. This flaw occurs when the `fcTL` width exceeds the `IHDR` width, leading to pixel data being written past the end of a heap allocation. Additionally, a heap-based buffer overflow exists in the DDS plug-in due to a BPP mismatch in the `load_layer()` function. Both vulnerabilities can be triggered by opening a specially crafted image file, potentially leading to code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame
Andrew and Nikolay reported connectivity issues with Cilium's service
load-balancing in case of vmxnet3.
If a BPF program for native XDP adds an encapsulation header such as
IPIP and transmits the packet out the same interface, then in case
of vmxnet3 a corrupted packet is being sent and subsequently dropped
on the path.
vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp()
through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address:
page = virt_to_page(xdpf->data);
tbi->dma_addr = page_pool_get_dma_addr(page) +
VMXNET3_XDP_HEADROOM;
dma_sync_single_for_device(&adapter->pdev->dev,
tbi->dma_addr, buf_size,
DMA_TO_DEVICE);
The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP
BPF program could have moved xdp->data. While the passed buf_size is
correct (xdpf->len), the dma_addr needs to have a dynamic offset which
can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data -
xdp->data_hard_start. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: fix overflow inside virtnet_rq_alloc
When the frag just got a page, then may lead to regression on VM.
Specially if the sysctl net.core.high_order_alloc_disable value is 1,
then the frag always get a page when do refill.
Which could see reliable crashes or scp failure (scp a file 100M in size
to VM).
The issue is that the virtnet_rq_dma takes up 16 bytes at the beginning
of a new frag. When the frag size is larger than PAGE_SIZE,
everything is fine. However, if the frag is only one page and the
total size of the buffer and virtnet_rq_dma is larger than one page, an
overflow may occur.
The commit f9dac92ba908 ("virtio_ring: enable premapped mode whatever
use_dma_api") introduced this problem. And we reverted some commits to
fix this in last linux version. Now we try to enable it and fix this
bug directly.
Here, when the frag size is not enough, we reduce the buffer len to fix
this problem. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add rough attr alloc_size check |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gem: Fix Virtual Memory mapping boundaries calculation
Calculating the size of the mapped area as the lesser value
between the requested size and the actual size does not consider
the partial mapping offset. This can cause page fault access.
Fix the calculation of the starting and ending addresses, the
total size is now deduced from the difference between the end and
start addresses.
Additionally, the calculations have been rewritten in a clearer
and more understandable form.
[Joonas: Add Requires: tag]
Requires: 60a2066c5005 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset")
(cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417) |
| An issue in Code27 Companion Hub SQ3A.220705.003.A1 allows a physically proximate attacker to execute arbitrary code via the USB debugging (ADB) and Android Debug Bridge components |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dsi: don't dump registers past the mapped region
On DSI 6G platforms the IO address space is internally adjusted by
io_offset. Later this adjusted address might be used for memory dumping.
However the size that is used for memory dumping isn't adjusted to
account for the io_offset, leading to the potential access to the
unmapped region. Lower ctrl_size by the io_offset value to prevent
access past the mapped area.
msm_disp_snapshot_add_block+0x1d4/0x3c8 [msm] (P)
msm_dsi_host_snapshot+0x4c/0x78 [msm]
msm_dsi_snapshot+0x28/0x50 [msm]
msm_disp_snapshot_capture_state+0x74/0x140 [msm]
msm_disp_snapshot_state_sync+0x60/0x90 [msm]
_msm_disp_snapshot_work+0x30/0x90 [msm]
kthread_worker_fn+0xdc/0x460
kthread+0x120/0x140
Patchwork: https://patchwork.freedesktop.org/patch/721747/ |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-topology: Correct the allocation size for bytes controls
The size of the data behind of scontrol->ipc_control_data for bytes
controls is:
[1] sizeof(struct sof_ipc4_control_data) + // kernel only struct
[2] sizeof(struct sof_abi_hdr)) + payload
The max_size specifies the size of [2] and it is coming from topology.
Change the function to take this into account and allocate adequate amount
of memory behind scontrol->ipc_control_data.
With the change we will allocate [1] amount more memory to be able to hold
the full size of data. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-bitmap: fix wrong bitmap_limit for clustermd when write sb
In clustermd, separate write-intent-bitmaps are used for each cluster
node:
0 4k 8k 12k
-------------------------------------------------------------------
| idle | md super | bm super [0] + bits |
| bm bits[0, contd] | bm super[1] + bits | bm bits[1, contd] |
| bm super[2] + bits | bm bits [2, contd] | bm super[3] + bits |
| bm bits [3, contd] | | |
So in node 1, pg_index in __write_sb_page() could equal to
bitmap->storage.file_pages. Then bitmap_limit will be calculated to
0. md_super_write() will be called with 0 size.
That means the first 4k sb area of node 1 will never be updated
through filemap_write_page().
This bug causes hang of mdadm/clustermd_tests/01r1_Grow_resize.
Here use (pg_index % bitmap->storage.file_pages) to make calculation
of bitmap_limit correct. |
| rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.10.50 until 0.10.80, CipherCtxRef::cipher_update_inplace in openssl/src/cipher_ctx.rs incorrectly sized output buffers when used with AES key-wrap-with-padding ciphers EVP_aes_{128,192,256}_wrap_pad. For a non-multiple-of-8 input, OpenSSL writes up to 7 bytes past the end of the caller's buffer or Vec, producing attacker-controllable heap corruption when the plaintext length is attacker-influenced. This issue is fixed in version 0.10.80. |
| Device Monitoring Studio 8.10.00.8925 contains a denial of service vulnerability that allows local attackers to crash the application by supplying an excessively long string to the server connection dialog. Attackers can trigger the crash by entering a malformed server name or address containing repeated characters through the Tools menu Connect to New Server interface. |
| FFmpeg versions 3.0 through 8.1.2 contain an out-of-bounds write vulnerability in the vf_swaprect video filter that allows attackers to corrupt heap memory by supplying a crafted NV12 video frame with odd width dimensions. The filter_frame() function reuses a temporary row buffer sized for plane 0's single-byte pixel step across all planes, causing an 18-byte memcpy into a 17-byte heap allocation when processing the two-byte-per-sample interleaved chroma plane of a 17x16 NV12 frame, resulting in heap corruption and process crash with potential for code execution. |
| FFmpeg versions 3.4 through 8.1.2 contain an out-of-bounds write vulnerability in the vf_floodfill video filter that allows attackers to corrupt heap memory by supplying a dynamically sized video stream with filtergraph reinitialization disabled via -reinit_filter 0. When config_input() allocates the points traversal stack based on initial frame dimensions and a subsequent larger frame is processed, filter_frame() performs flood-fill neighbor pushes beyond the original allocation boundary, resulting in heap corruption and process crash with potential for code execution depending on heap layout and process hardening. |
| A flaw was found in libssh. Incorrect AES-GCM finalization checks in builds using the OpenSSL backend can effectively remove integrity protection, allowing an in-path attacker to modify plaintext on the wire without detection. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Compute the correct max length of the in-GHCB scratch area
When setting the length of the GHCB scratch area, and the area is in the
GHCB shared buffer, set the effective length of the scratch area to the max
possible size given the start of the guest-provided pointer, and the end of
the shared buffer.
The code was "fine" when first introduced, as KVM doesn't consult the
length of the buffer when emulating MMIO, because the passed in @len always
specifies the *max* size required. But for PSC requests, the incoming @len
is just the minimum length (to process the header), and KVM needs to know
the full size of the scratch area to avoid buffer overflows (spoiler alert).
Opportunistically rename @len => @min_len to better reflect its role. |
| Incorrect Calculation of Buffer Size vulnerability in Apache NimBLE when processing Legacy Advertising Report HCI event.
When a single HCI advertising report event bundles multiple reports, NimBLE miscalculated the offset to the next report. This can cause the host to read past the end of the buffer and deliver a GAP event with bogus data to the application.
Severity is low: NimBLE's own controller never batches multiple reports into one event, so this only matters when NimBLE's host is paired with a third-party controller that does.
This issue affects Apache NimBLE: through 1.9.0.
Users are recommended to upgrade to version 1.10.0, which fixes the issue. |
| cJSON library is vulnerable to an integer overflow in the print_string_ptr() function in cJSON.c on 32-bit platforms. The escape_characters counter, a 32-bit size_t, can wrap around when processing strings containing approximately 858,993,460 or more control characters, causing the output buffer to be allocated based on an underestimated length. When cJSON_PrintBuffered() is used with a pre-allocated buffer, the subsequent write loop overflows the heap allocation. An attacker supplying a crafted JSON string to an application using cJSON on a 32-bit platform can cause a heap buffer overflow, potentially leading to remote code execution, information disclosure, or denial of service.
Because project creator contact attempts were unsuccessful, the vulnerability has only been confirmed in version 1.7.19 but may also affect other versions. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: account for fraggap on the paged allocation path
In __ip_append_data(), when the paged-allocation branch is taken,
alloclen and pagedlen are computed as
alloclen = fragheaderlen + transhdrlen;
pagedlen = datalen - transhdrlen;
datalen already includes fraggap, but the fraggap bytes carried over
from the previous skb are copied into the new skb's linear area at
offset transhdrlen by the subsequent skb_copy_and_csum_bits(). The
linear area is therefore undersized by fraggap bytes while pagedlen is
overstated by the same amount.
The non-paged branch sets alloclen to fraglen, which already accounts
for fraggap because datalen does. Bring the paged branch in line by
adding fraggap to alloclen and subtracting it from pagedlen.
After this adjustment, copy no longer collapses to -fraggap on the
paged path, so remove the stale comment describing that old arithmetic. |
