| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Marlin Firmware through 2.1.2.7, fixed in commit 1f255d1, when built with MESH_BED_LEVELING enabled, contains an out-of-bounds write vulnerability in the M421 G-code handler that allows attackers to corrupt firmware memory by supplying out-of-range X and Y grid indices. Attackers can send a single crafted G-code command via USB serial, network interface, or malicious gcode file to write an attacker-controlled 32-bit float value past the z_values array bounds, corrupting adjacent firmware variables and causing denial of service or firmware state corruption. |
| Backpropagate is a Python library for fine-tuning large language models on a single GPU. In versions 1.1.0 and 1.1.1, the optional Reflex web UI exposes a training control plane without authentication: dataset upload, model load, training start/stop, multi-run orchestration, GGUF export, and HuggingFace Hub push. The CLI accepts two operator-facing flags intended as security controls: --auth user:pass — documented as "require HTTP Basic authentication on every request to the UI." and--share — documented as "expose the UI on a public address; requires --auth." When --auth user:pass is passed, the CLI prints Auth: enabled (user: <username>) to confirm to the operator that authentication is active, then exports BACKPROPAGATE_UI_AUTH=user:pass to the subprocess that launches the Reflex backend. The Reflex backend (backpropagate/ui_app/**) never reads BACKPROPAGATE_UI_AUTH. No authentication middleware is registered. No request-level guard runs. No WebSocket upgrade guard runs. Any client that reaches the bound port — local or remote, depending on whether --share is used — has full UI access. An inline comment at backpropagate/cli.py:1217-1218 in the v1.1.0 source documents the gap: "For Phase 1 the variable is exported but Reflex doesn't read it yet." This comment was internal-facing; the user-facing documentation (README, CHANGELOG, SHIP_GATE) advertised the contract as enforced. An attacker who reaches the bound port can read uploaded datasets, trigger arbitrary training runs against any local base models as well as read their paths, trigger HuggingFace Hub pushes and cause disk-fill DoS. This issue has been fixed in version 1.2.0. If developers cannot immediately upgrade to 1.2.0 run backprop ui with no flags so it binds to localhost, use SSH port-forwarding (ssh -L 7860:localhost:7860 <training-host>) instead of --share for remote access, and audit any host previously launched with --share, re-issuing any HF tokens used during those sessions. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Add spectre boundry for syscall dispatch table
The LoongArch syscall number is directly controlled by userspace, but
does not have a array_index_nospec() boundry to prevent access past the
syscall function pointer tables. |
| In the Linux kernel, the following vulnerability has been resolved:
lib/crypto: mpi: Fix integer underflow in mpi_read_raw_from_sgl()
Yiming reports an integer underflow in mpi_read_raw_from_sgl() when
subtracting "lzeros" from the unsigned "nbytes".
For this to happen, the scatterlist "sgl" needs to occupy more bytes
than the "nbytes" parameter and the first "nbytes + 1" bytes of the
scatterlist must be zero. Under these conditions, the while loop
iterating over the scatterlist will count more zeroes than "nbytes",
subtract the number of zeroes from "nbytes" and cause the underflow.
When commit 2d4d1eea540b ("lib/mpi: Add mpi sgl helpers") originally
introduced the bug, it couldn't be triggered because all callers of
mpi_read_raw_from_sgl() passed a scatterlist whose length was equal to
"nbytes".
However since commit 63ba4d67594a ("KEYS: asymmetric: Use new crypto
interface without scatterlists"), the underflow can now actually be
triggered. When invoking a KEYCTL_PKEY_ENCRYPT system call with a
larger "out_len" than "in_len" and filling the "in" buffer with zeroes,
crypto_akcipher_sync_prep() will create an all-zero scatterlist used for
both the "src" and "dst" member of struct akcipher_request and thereby
fulfil the conditions to trigger the bug:
sys_keyctl()
keyctl_pkey_e_d_s()
asymmetric_key_eds_op()
software_key_eds_op()
crypto_akcipher_sync_encrypt()
crypto_akcipher_sync_prep()
crypto_akcipher_encrypt()
rsa_enc()
mpi_read_raw_from_sgl()
To the user this will be visible as a DoS as the kernel spins forever,
causing soft lockup splats as a side effect.
Fix it. |
| When NGINX Gateway Fabric is configured using GRPCRoutes, an authenticated, remote attacker with permission to create or modify GRPCRoute resources can cause the NGINX Gateway Fabric control plane to terminate by sending undisclosed GRPCRoute configurations containing backendRef filters.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: asihpi: Fix potential OOB array access
ASIHPI driver stores some values in the static array upon a response
from the driver, and its index depends on the firmware. We shouldn't
trust it blindly.
This patch adds a sanity check of the array index to fit in the array
size. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-47 and 7.1.2-22, when performing a polynomial distortion an out of bounds over-read of 24 bytes can occur when specifying specific arguments. This issue has been patched in versions 6.9.13-47 and 7.1.2-22. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-48 and 7.1.2-22, an invalid connected-components:keep-top value could result in a heap buffer over-read when performing the connected components operation. This issue has been patched in versions 6.9.13-48 and 7.1.2-22. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: b43legacy: enforce bounds check on firmware key index in RX path
Same fix as b43: the firmware-controlled key index in b43legacy_rx()
can exceed dev->max_nr_keys. The existing B43legacy_WARN_ON is
non-enforcing in production builds, allowing an out-of-bounds read of
dev->key[].
Make the check enforcing by dropping the frame for invalid indices. |
| NVIDIA DALI contains a vulnerability in a component where an attacker could cause an improper index validation. A successful exploit of this vulnerability might lead to code execution, data tampering, denial of service, and information disclosure. |
| OP-TEE Trusted OS is the secure side implementation of OP-TEE project, a Trusted Execution Environment. Versions prior to 3.19.0, contain an Improper Validation of Array Index vulnerability. The function `cleanup_shm_refs()` is called by both `entry_invoke_command()` and `entry_open_session()`. The commands `OPTEE_MSG_CMD_OPEN_SESSION` and `OPTEE_MSG_CMD_INVOKE_COMMAND` can be executed from the normal world via an OP-TEE SMC. This function is not validating the `num_params` argument, which is only limited to `OPTEE_MSG_MAX_NUM_PARAMS` (127) in the function `get_cmd_buffer()`. Therefore, an attacker in the normal world can craft an SMC call that will cause out-of-bounds reading in `cleanup_shm_refs` and potentially freeing of fake-objects in the function `mobj_put()`. A normal-world attacker with permission to execute SMC instructions may exploit this flaw. Maintainers believe this problem permits local privilege escalation from the normal world to the secure world. Version 3.19.0 contains a fix for this issue. There are no known workarounds. |
| The DataRow.Decode function fails to properly validate field lengths. A malicious or compromised PostgreSQL server can send a DataRow message with a negative field length, causing a slice bounds out of range panic. |
| MapServer is a system for developing web-based GIS applications. From 6.4.0 to before 8.6.3, msSLDParseUserStyle always calls _SLDApplyRuleValues(psRule, psLayer, 1); for any <Rule> carrying <ElseFilter/> — it assumes msSLDParseRule added one class. When the rule has no symbolizer (a structurally valid SLD), msSLDParseRule adds zero, and _SLDApplyRuleValues ends up indexing _class[-1], resulting in a NULL pointer dereference. A 200-byte well-formed SLD via the WMS SLD_BODY= parameter is enough to trigger this, no auth required. This vulnerability is fixed in 8.6.3. |
| Memory corruption while using Strongbox due to missing bounds check. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: s3c24xx: check the size of the SMBUS message before using it
The first byte of an i2c SMBUS message is the size, and it should be
verified to ensure that it is in the range of 0..I2C_SMBUS_BLOCK_MAX
before processing it.
This is the same logic that was added in commit a6e04f05ce0b ("i2c:
tegra: check msg length in SMBUS block read") to the i2c tegra driver. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: validate DFA start states are in bounds in unpack_pdb
Start states are read from untrusted data and used as indexes into the
DFA state tables. The aa_dfa_next() function call in unpack_pdb() will
access dfa->tables[YYTD_ID_BASE][start], and if the start state exceeds
the number of states in the DFA, this results in an out-of-bound read.
==================================================================
BUG: KASAN: slab-out-of-bounds in aa_dfa_next+0x2a1/0x360
Read of size 4 at addr ffff88811956fb90 by task su/1097
...
Reject policies with out-of-bounds start states during unpacking
to prevent the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix index out of bounds in degamma hardware format translation
Fixes index out of bounds issue in
`cm_helper_translate_curve_to_degamma_hw_format` function. The issue
could occur when the index 'i' exceeds the number of transfer function
points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds the function returns
false to indicate an error.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:594 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:595 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:596 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max |
| For certain crafted inputs, a 'ed25519.PrivateKey' was created by casting malformed wire bytes, leading to a panic when used. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfiguration
link_id is taken from the ML Reconfiguration element (control & 0x000f),
so it can be 0..15. link_removal_timeout[] has IEEE80211_MLD_MAX_NUM_LINKS
(15) elements, so index 15 is out-of-bounds. Skip subelements with
link_id >= IEEE80211_MLD_MAX_NUM_LINKS to avoid a stack out-of-bounds
write. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc_ncm: add ndpoffset to NDP16 nframes bounds check
cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE
entries fit within the skb. The first check correctly accounts for
ndpoffset:
if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len)
but the second check omits it:
if ((sizeof(struct usb_cdc_ncm_ndp16) +
ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len)
This validates the DPE array size against the total skb length as if
the NDP were at offset 0, rather than at ndpoffset. When the NDP is
placed near the end of the NTB (large wNdpIndex), the DPE entries can
extend past the skb data buffer even though the check passes.
cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating
the DPE array.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly. |
