| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The SF32LB MPI QSPI NOR flash driver (drivers/flash/flash_sf32lb_mpi_qspi_nor.c) validated the flash offset and length on its read and write paths with the test (offset + size) > data->size. Because offset is a signed off_t while size is unsigned, a negative offset is converted to a large unsigned value and the addition can wrap to a small result that passes the check. The read path then performs memcpy(dst, (void *)(data->base + offset), size) and the write path programs flash at offset and cache-invalidates data->base + offset, in both cases accessing memory outside the mapped flash window. The driver's erase path already rejected negative offsets, but read and write did not.
In builds with CONFIG_USERSPACE, flash_read and flash_write are syscalls whose verifiers validate the device object and the caller's buffer but deliberately delegate offset bounds checking to the driver. An unprivileged thread that has been granted access to this flash device can therefore call the syscall with a crafted negative offset and a buffer valid in its own memory domain, and reach the unchecked access.
The most direct impact is on the read path: by choosing a negative offset and matching size, an attacker slides the memcpy source below the flash base and copies arbitrary CPU-addressable memory into its own buffer, disclosing memory it is not authorized to read. The write path additionally allows programming flash at an out-of-range address and invalidating an attacker-chosen cache range, affecting integrity and availability. Reachability requires userspace to be enabled and the raw flash device object to be granted to an untrusted thread.
The fix replaces the check with qspi_nor_range_is_valid(), which rejects negative offsets and performs the bound comparison in overflow-safe 64-bit arithmetic on both paths, and additionally adds an SRAM DMA bounce buffer plus source/destination overlap rejection to prevent a separate DMA bus-hang condition. |
| SonicWall Global VPN Client version 4.10.8.1108 and earlier is vulnerable to an out-of-bounds kernel memory read in the SWIPsec.sys driver, which could allow a local attacker to cause a system crash. |
| A vulnerability in the Mach-O file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition or possibly other expanded impacts as a result of memory corruption on an affected device.
This vulnerability is due to improper boundary checks for content in Mach-O files during scanning, which may result in an out-of-bounds buffer read. An attacker could exploit this vulnerability by submitting a crafted Mach-O file to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. |
| gopacket provides packet processing capabilities for Go. Through version 1.7.0, multiple layer decoders use attacker-controlled lengths, counts, or offsets before validating them against packet buffers, allowing a crafted packet decoded through DecodingLayerParser or DecodeFromBytes to trigger an unrecovered panic and remotely deny service. A patch commit is available at 210f25f. |
| Imager versions from 0.45_02 before 1.034 for Perl may expose adjacent heap bytes via strlen() over-read from zero-count ASCII EXIF entries in copy_string_tags.
copy_string_tags() computes an ASCII EXIF tag's length as `entry->size - 1` to strip the trailing NUL. A zero-count ASCII entry sets `entry->size` to 0, and the derived length reaches i_tags_add() as -1, which is interpreted as a request to call strlen(), scanning past the entry to the next NUL and copying those bytes into the tag. JPEG reaches this path via im_decode_exif(), as does the separate Imager::File::WEBP distribution, which is fixed by upgrading Imager.
Any caller of Imager->read() on an attacker-supplied image with such an entry may receive an exif_* tag holding adjacent heap bytes instead of an empty string. |
| llama.cpp builds b5702 through b7653 contain an out-of-bounds read vulnerability in the recurrent memory state restore path that allows attackers with write access to the slot save directory to read memory past the end of the allocated cells array. Attackers can craft a malicious slot file with an oversized seq_id value to trigger an out-of-bounds read that leaks heap data including pointer values into server logs, defeating ASLR protections and facilitating further exploitation. |
| llama.cpp builds b3978 through b9058 contain an integer underflow and out-of-bounds read vulnerability in the DRY sampler that allows unauthenticated attackers to trigger a heap buffer underflow by sending a crafted HTTP request with dry_allowed_length set to INT32_MIN to the /v1/completions or /v1/chat/completions endpoints. Attackers can exploit this vulnerability to crash the server with SIGSEGV causing denial of service for all connected users, or corrupt token sampling probabilities by reading garbage values from memory before the allocated buffer. |
| A maliciously crafted TIF file, when parsed through certain Autodesk products during image import, can cause an Out-of-Bounds Read in the image handling library. A malicious actor can leverage this vulnerability to cause a denial of service |
| A maliciously crafted DWG or DXF file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash or disclose sensitive information. |
| A maliciously crafted DWG or DXF file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash or disclose sensitive information. |
| A vulnerability in the PDF file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition or possibly other expanded impacts as a result of memory corruption on an affected device.
This vulnerability is due to improper boundary checks for content in PDF files during scanning, which may result in an out-of-bounds buffer read. An attacker could exploit this vulnerability by submitting a crafted PDF file to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. |
| Contiki-NG's DNS/mDNS resolver skip_name() in os/services/resolv/resolv.c walks DNS wire-format name labels with no packet-boundary check, and the caller in newdata() invokes it in a loop iterating nquestions times from the attacker-controlled DNS header before validating the transaction ID. An attacker who sets nquestions higher than the number of complete questions present causes skip_name() to walk past the UDP packet buffer, and the returned pointer is cast to struct dns_answer * for further memory reads. On builds with RESOLV_CONF_SUPPORTS_MDNS enabled, any peer on the local segment can trigger the read unauthenticated via a multicast UDP 5353 packet with no outstanding query required; on standard DNS builds an attacker who can inject a UDP response from port 53 during an outstanding query can trigger the same read. Impact is out-of-bounds read of uip_buf and adjacent memory, disclosing memory contents or crashing the resolver. |
| TimescaleDB through 2.29.1, fixed in commit 517c13e, contains an out-of-bounds read vulnerability that allows authenticated attackers to cause query-result integrity failures or backend crashes by supplying a crafted Simple8b selector-11 value, which is stored in the signed int16 Arrow dictionary-index type and bypasses index validation checks in bulk text dictionary decompression. Attackers with direct DML access to a non-frozen physical compressed hypertable relation can trigger an out-of-bounds read before the base of the live offsets array through the VectorAgg single-text hashing strategy, resulting in incorrect aggregation output, backend SIGSEGV, or PostgreSQL crash recovery depending on build configuration. |
| TimescaleDB through 2.29.1, fixed in commit 517c13e, contains an out-of-bounds read in the Dictionary compression reverse row iterator (tsl/src/compression/algorithms/dictionary.c). The forward path validates the decoded index; the reverse path uses an assertion compiled out of release builds, leaving the 64-bit Simple8b index unvalidated and the read offset attacker-controlled. Attackers with DML access to a physical compressed relation can store a crafted datum and run a reverse-order scan. With a pass-by-value column type the out-of-bounds Datum is returned to the client as a normal column value, disclosing backend memory including the shared buffer pool, which SQL access control does not cover. |
| TimescaleDB through 2.29.1, fixed in commit 517c13e, contains an out-of-bounds read vulnerability in the Gorilla compression reverse row iterator that allows authenticated attackers to cause a denial of service by storing a crafted compressed datum with an internally inconsistent BitArray. Attackers with DML access to a compressed hypertable can trigger an unsigned integer wraparound in the reverse iterator bucket index computation, causing a read beyond the end of the bucket array, resulting in a SIGSEGV crash that can be repeatedly triggered on each subsequent reverse-order scan. |
| node-re2 provides RE2 regular expression bindings for Node.js. Prior to version 1.26.1, passing a Buffer whose final bytes form a truncated (incomplete) multi-byte UTF-8 sequence could cause the native binding to read past the end of the allocated buffer while attempting to decode the final, incomplete code point. This could result in an out-of-bounds read and potential disclosure of adjacent memory contents. This issue is fixed in version 1.26.1. |
| Contiki-NG's LwM2M TLV parser lwm2m_tlv_read() in os/services/lwm2m/lwm2m-tlv.c ignores its caller-supplied buffer length argument and reads up to six bytes from the input buffer with no bounds check. The caller in lwm2m-engine.c iterates while there is at least one byte remaining, so a crafted CoAP WRITE to any LwM2M endpoint whose final TLV supplies exactly one byte triggers up to five out-of-bounds reads of heap memory adjacent to the CoAP input buffer, disclosing memory contents (including key material and peer addresses) through the parsed tlv->id, tlv->length, and tlv->value fields. Corrupted tlv_len derived from the out-of-bounds memory further corrupts the caller's parse offset. In LwM2M NoSec mode, the default for constrained devices, no authentication is required. |
| A maliciously crafted PDF file, when parsed through Autodesk Revit, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| Tobit Laboratories AG TeamDavid's Webbox application handles password changes using a function triggered by
including the string "(editini)" in the file path, writing the new
password to the specified "Archive.ini" file. However, the application
does not verify that the provided path actually refers to an
"Archive.ini" file. If an attacker specifies a different file with
excessive size, a buffer overflow occurs. This vulnerability allows an
unauthenticated attacker to crash the server, resulting in denial of
service. This issue affects TeamDavid through Rollout 524. |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to execute code locally. |
