| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ipmi-oem in FreeIPMI before 1.16.17 has exploitable buffer overflows on response messages. The Intelligent Platform Management Interface (IPMI) specification defines a set of interfaces for platform management. It is implemented by a large number of hardware manufacturers to support system management. It is most commonly used for sensor reading (e.g., CPU temperatures through the ipmi-sensors command within FreeIPMI) and remote power control (the ipmipower command). The ipmi-oem client command implements a set of a IPMI OEM commands for specific hardware vendors. If a user has supported hardware, they may wish to use the ipmi-oem command to send a request to a server to retrieve specific information. Three subcommands were found to have exploitable buffer overflows on response messages. They are: "ipmi-oem dell get-last-post-code - get the last POST code and string describing the error on some Dell servers," "ipmi-oem supermicro extra-firmware-info - get extra firmware info on Supermicro servers," and "ipmi-oem wistron read-proprietary-string - read a proprietary string on Wistron servers." |
| XnSoft NConvert 7.230 is vulnerable to Stack Buffer Overrun via a crafted .tiff file. |
| A vulnerability was determined in UTT HiPER 1200GW up to 2.5.3-170306. This impacts the function strcpy of the file /goform/websHostFilter. This manipulation causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. |
| MariaDB server is a community developed fork of MySQL server. An authenticated user can crash MariaDB versions 11.4 before 11.4.10 and 11.8 before 11.8.6 via a bug in JSON_SCHEMA_VALID() function. Under certain conditions it might be possible to turn the crash into a remote code execution. These conditions require tight control over memory layout which is generally only attainable in a lab environment. This issue is fixed in MariaDB 11.4.10, MariaDB 11.8.6, and MariaDB 12.2.2. |
| A vulnerability was identified in UTT HiPER 1250GW up to 3.2.7-210907-180535. Affected is the function strcpy of the file /goform/setSysAdm. Such manipulation of the argument GroupName leads to buffer overflow. It is possible to launch the attack remotely. The exploit is publicly available and might be used. |
| NGINX Open Source and NGINX Plus have a vulnerability in the ngx_http_dav_module module that might allow an attacker to trigger a buffer overflow to the NGINX worker process; this vulnerability may result in termination of the NGINX worker process or modification of source or destination file names outside the document root. This issue affects NGINX Open Source and NGINX Plus when the configuration file uses DAV module MOVE or COPY methods, prefix location (nonregular expression location configuration), and alias directives. The integrity impact is constrained because the NGINX worker process user has low privileges and does not have access to the entire system. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| OpenWrt Project is a Linux operating system targeting embedded devices. In versions prior to 24.10.6 and 25.12.1, the mdns daemon has a Stack-based Buffer Overflow vulnerability in the parse_question function. The issue is triggered by PTR queries for reverse DNS domains (.in-addr.arpa and .ip6.arpa). DNS packets received on UDP port 5353 are expanded by dn_expand into an 8096-byte global buffer (name_buffer), which is then copied via an unbounded strcpy into a fixed 256-byte stack buffer when handling TYPE_PTR queries. The overflow is possible because dn_expand converts non-printable ASCII bytes (e.g., 0x01) into multi-character octal representations (e.g., \001), significantly inflating the expanded name beyond the stack buffer's capacity. A crafted DNS packet can exploit this expansion behavior to overflow the stack buffer, making the vulnerability reachable through normal multicast DNS packet processing. This issue has been fixed in versions 24.10.6 and 25.12.1. |
| strukturag libde265 commit d9fea9d wa discovered to contain a segmentation fault via the component decoder_context::compute_framedrop_table(). |
| pyOpenSSL is a Python wrapper around the OpenSSL library. Starting in version 22.0.0 and prior to version 26.0.0, if a user provided callback to `set_cookie_generate_callback` returned a cookie value greater than 256 bytes, pyOpenSSL would overflow an OpenSSL provided buffer. Starting in version 26.0.0, cookie values that are too long are now rejected. |
| YAML::Syck versions through 1.36 for Perl has several potential security vulnerabilities including a high-severity heap buffer overflow in the YAML emitter.
The heap overflow occurs when class names exceed the initial 512-byte allocation.
The base64 decoder could read past the buffer end on trailing newlines.
strtok mutated n->type_id in place, corrupting shared node data.
A memory leak occurred in syck_hdlr_add_anchor when a node already had an anchor. The incoming anchor string 'a' was leaked on early return. |
| A vulnerability was determined in UTT HiPER 810G up to 1.7.7-171114. Affected is the function strcpy of the file /goform/formApLbConfig. This manipulation of the argument loadBalanceNameOld causes buffer overflow. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. |
| A security vulnerability has been detected in LB-LINK BL-WR9000 2.4.9. The impacted element is the function sub_44D844 of the file /goform/get_hidessid_cfg. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| telnetd in GNU inetutils through 2.7 allows an out-of-bounds write in the LINEMODE SLC (Set Local Characters) suboption handler because add_slc does not check whether the buffer is full. |
| ncurses v6.5 and v6.4 are vulnerable to Buffer Overflow in progs/infocmp.c, function analyze_string(). |
| A vulnerability was detected in Tenda AC21 16.03.08.16. Impacted is the function formSetQosBand of the file /goform/SetNetControlList. Performing a manipulation of the argument list results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used. |
| In UNIX Fourth Research Edition (v4), the su command is vulnerable to a buffer overflow due to the 'password' variable having a fixed size of 100 bytes. A local user can exploit this to gain root privileges. It is unlikely that UNIX v4 is running anywhere outside of a very small number of lab environments. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| GStreamer ASF Demuxer Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the processing of stream headers within ASF files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28843. |
| GStreamer H.266 Codec Parser Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the parsing of decoding units. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28839. |
| GStreamer JPEG Parser Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the processing of Huffman tables. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28840. |
| PX4 autopilot is a flight control solution for drones. Prior to 1.17.0-rc2, The crsf_rc parser accepts an oversized variable-length known packet and copies it into a fixed 64-byte global buffer without a bounds check. In deployments where crsf_rc is enabled on a CRSF serial port, an adjacent/raw-serial attacker can trigger memory corruption and crash PX4. This vulnerability is fixed in 1.17.0-rc2. |
