| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A NULL pointer dereference in the AP4_AtomSampleTable::GetSample() function of Aleksoid1978 MPC-BE before commit 4341cb3 allows attackers to cause a Denial of Service (DoS) via a crafted MP4 file. |
| A division-by-zero vulnerability in the CStreamSwitcherOutputPin::DecideBufferSize function of Aleksoid1978 MPC-BE before commit 4341cb3 allows attackers to cause a Denial of Service (DoS) via a crafted MP4 file. |
| An access violation in the BaseSplitterFile::Read function of Aleksoid1978 MPC-BE before commit 4341cb3 allows attackers to cause a Denial of Service (DoS) via a crafted MP4 file. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't warn on NULL cgrp_moving_from in scx_cgroup_move_task()
A WARN fires when systemd's user manager writes "+cpu +memory +pids" to
its own subtree_control while a sched_ext scheduler is loaded:
WARNING: at kernel/sched/ext.c:3227 scx_cgroup_move_task+0xa8/0xb0
scx_cgroup_move_task+0xa8/0xb0
sched_move_task+0x134/0x290
cpu_cgroup_attach+0x39/0x70
cgroup_migrate_execute+0x37d/0x450
cgroup_update_dfl_csses+0x1e3/0x270
cgroup_subtree_control_write+0x3e7/0x440
scx_cgroup_can_attach() arms cgrp_moving_from only when a task's cpu
cgroup changes. It can still be NULL when scx_cgroup_move_task() runs,
through this sequence:
Step Result
--------------------------------- ----------------------------------
1. cpu enabled on cgroup G cpu css = A
2. cpu toggled off then on for G A killed, B created (same cgroup)
3. an exiting task keeps A alive migration skips it, A now stale
4. +memory migrates G stale A vs current B pulls cpu in
5. cpu attach runs for all tasks hits a live, cpu-unchanged task
6. scx_cgroup_move_task() on it cgrp_moving_from NULL -> WARN
The mismatch is that scx_cgroup_can_attach() keys on cgroup identity
while migration drives the move on css identity, so a NULL cgrp_moving_from
here is a legitimate css-only migration, not a missing prep.
The call is already gated on cgrp_moving_from, so just drop the warning.
ops.cgroup_prep_move() and ops.cgroup_move() stay paired. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mincore: handle non-swap entries before !CONFIG_SWAP guard
mincore_swap() also fields migration/hwpoison entries (and shmem
swapin-error entries), which can exist on !CONFIG_SWAP builds when
CONFIG_MIGRATION or CONFIG_MEMORY_FAILURE is enabled. The
!IS_ENABLED(CONFIG_SWAP) guard ran before the non-swap-entry early return,
so mincore_pte_range() can spuriously WARN and report these pages
nonresident on !CONFIG_SWAP kernels.
Move the guard below the non-swap-entry check so only true swap entries
trip the WARN, and migration/hwpoison entries take the existing "uptodate
/ non-shmem" path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bonding: fix NULL pointer dereference in bond_do_ioctl()
In bond_do_ioctl(), slave_dev is obtained via __dev_get_by_name() which
can return NULL if the requested interface name does not exist. However,
the subsequent slave_dbg() call is placed before the NULL check:
slave_dev = __dev_get_by_name(net, ifr->ifr_slave);
slave_dbg(bond_dev, slave_dev, "slave_dev=%p:\n", slave_dev); //here
if (!slave_dev)
return -ENODEV;
The slave_dbg() macro expands to netdev_dbg(bond_dev, "(slave %s): " fmt,
(slave_dev)->name, ...) which unconditionally dereferences slave_dev->name
before the NULL check is performed. This results in a NULL pointer
dereference kernel oops when a user calls bonding ioctl (e.g.
SIOCBONDENSLAVE, SIOCBONDRELEASE, etc.) with a non-existent slave
interface name.
This is reachable from userspace via the bonding ioctl interface with
CAP_NET_ADMIN capability, making it a potential local denial-of-service
vector.
Fix by moving the slave_dbg() call after the NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: Fix driver removal with disabled KMS
DRM atomic and modesetting aren't initialized if virtio-gpu driver built
with disabled KMS, leading to access of uninitialized data on driver
removal/unbinding and crashing kernel. Fix it by skipping shutting down
atomic core with unavailable KMS. |
| A NULL pointer dereference in the AP4_TkhdAtom::GetTrackId() function of Aleksoid1978 MPC-BE before commit 4341cb3 allows attackers to cause a Denial of Service (DoS) via a crafted MP4 file. |
| OpenTelemetry Java Instrumentation provides OpenTelemetry auto-instrumentation and instrumentation libraries for Java. In versions prior to 2.27.0, the RMI context propagation payload reader limits the number of context entries but does not limit the aggregate size of the strings read from the stream. An attacker who can reach an RMI endpoint on an instrumented JVM can send an oversized context propagation payload. This can cause excessive memory allocation while the JVM reads the payload, potentially leading to denial of service. The issue affects only deployments where RMI instrumentation is enabled and an RMI endpoint is network-reachable. This issue has been fixed in version 2.27.0. |
| OpenTelemetry Java Instrumentation provides OpenTelemetry auto-instrumentation and instrumentation libraries for Java. In versions prior to 2.28.0, the JDBC auto-instrumentation may fail to sanitize passwords in SQL CONNECT statements when the password is double-quoted. As a result, clear-text database passwords can be added to trace span attributes and exported to observability backends. This issue has been fixed in version 2.28.0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gem: Fix phys BO pread/pwrite with offset
sg_page() returns struct page pointer not (void *) so the scaling
of pread/pwrite is wrong for phys BO and wrong parts of BO would be
accessed if non-zero offset is used.
Last impacted platform with overlay or cursor planes using phys
mapping was Gen3/945G/Lakeport.
(cherry picked from commit 3e49a2f85070b2fb672c1e0fdba281a4ea3aebe6) |
| Dell Device Management Agent, versions prior to DDMA 26.05, contain an Improper Link Resolution Before File Access ('Link Following’) vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges. |
| Wagtail is an open source content management system built on Django. In versions prior to 7.0.8, 7.3.3 and 7.4.2, reflected cross-site scripting (XSS) vulnerability exists on the dynamic image URL generator view within the Wagtail admin interface. A user with a limited-permission editor account for the Wagtail admin could craft a URL that, when viewed by a user with higher privileges, could perform actions with that user's credentials. The vulnerability is present for all sites, even if they do not enable the dynamic image serve view. The vulnerability is not exploitable by an ordinary site visitor without access to the Wagtail admin. This issue has been fixed in versions 7.0.8, 7.3.3, and 7.4.2. |
| Wagtail is an open source content management system built on Django. In versions prior to 7.0.8, 7.3.3 and 7.4.2, a low-level user with the "Can submit translation" permission can create translations for any page, including those they do not have permissions for. This issue has been fixed in versions 7.0.8, 7.3.3, and 7.4.2. |
| Wagtail is an open source content management system built on Django. In versions prior to 7.0.8, 7.3.3 and 7.4.2, due to a missing permission check on the image preview endpoint, a user with access to the Wagtail admin can preview any image. The existing data of the image object itself is not exposed. The vulnerability is not exploitable by an ordinary site visitor without access to the Wagtail admin. This issue has been fixed in versions 7.0.8, 7.3.3, and 7.4.2. |
| Wagtail is an open source content management system built on Django. In versions prior to 7.0.8, 7.3.3 and 7.4.2, the Documents and Images chooser's chosen endpoint incorrectly listed items for which the user has not been granted choose permission. A user with access to the Wagtail admin could see the filename and name and URLs of documents and images in those collections. The vulnerability is not exploitable by an ordinary site visitor without access to the Wagtail admin. This issue has been fixed in versions 7.0.8, 7.3.3, and 7.4.2. |
| Wagtail is an open source content management system built on Django. In versions prior to 7.0.8, 7.3.3 and 7.4.2, an authenticated admin user can trigger expensive rendition processing with purposefully crafted filter specs resulting in potentially service degradation. The vulnerability is not exploitable by an ordinary site visitor without access to the Wagtail admin. This issue has been fixed in versions 7.0.8, 7.3.3, and 7.4.2. |
| An incorrect authorization vulnerability was identified in GitHub Enterprise Server that allowed a user-to-server token scoped to a GitHub App installation to perform certain write operations on public repositories outside the token's intended scope. This was possible because the authorization check only verified that the installation had read permissions on the target repository rather than verifying that the token's installation was explicitly granted access to that repository. An attacker who obtained a victim's user-to-server token could create issues, issue comments, commit comments, and private vulnerability reports on any public repository, appearing as the victim user with no indication of the app involvement. This vulnerability was fixed by adding a repository scope check for user-to-server tokens issued by global apps. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.22 and was fixed in versions 3.21.2, 3.20.4, 3.19.8, 3.18.11, 3.17.17, 3.16.20. This vulnerability was reported via the GitHub Bug Bounty program. |
| Silverstripe Framework is a PHP framework which powers the Silverstripe CMS. In versions prior to 6.2.2, the "Insert media from web" functionality in the CMS is vulnerable to XSS from a specially crafted embed. This issue was fixed in version 6.2.2/ |
| Tina is a headless content management system. In versions prior to @tinacms/app 2.5.6 and tinacms 3.9.3, cross-origin postMessage handlers and a rich-text URL-sanitization bypass enable stored XSS and session takeover. The library registers window message listeners — the useTina overlay handler, the OAuth authentication popup handler, and the admin↔preview iframe GraphQL reducer — that act on event.data without verifying event.origin or event.source and post messages using non-specific target origins, while insufficient URL sanitization in rich-text content allows malicious URLs to persist and execute. A page the victim visits (or a window in an opener/iframe relationship with a Tina admin) can forge messages to drive the editor, inject preview content, or observe/forge the OAuth popup channel to take over an authenticated editing session. This issue has been fixed in versions @tinacms/app 2.5.6 and tinacms 3.9.3. |
