| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: avoid reading the written value in offsets array
When sending a transaction, its offsets array is first copied into the
target proc's vma, and then the values are read back from there. This is
normally fine because the vma is a read-only mapping, so the target
process cannot change the value under us.
However, if the target process somehow gains the ability to write to its
own vma, it could change the offset before it's read back, causing the
kernel to misinterpret what the sender meant. If the sender happens to
send a payload with a specific shape, this could in the worst case lead
to the receiver being able to privilege escalate into the sender.
The intent is that gaining the ability to change the read-only vma of
your own process should not be exploitable, so remove this TOCTOU read
even though it's unexploitable without another Binder bug. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Workaround SQM/PSE stalls by disabling sticky
NIX SQ manager sticky mode is known to cause stalls when multiple SQs
share an SMQ and transmit concurrently. Additionally, PSE may deadlock
on transitions between sticky and non-sticky transmissions. There is
also a credit drop issue observed when certain condition clocks are
gated.
work around these hardware errata by:
- Disabling SQM sticky operation:
- Clear TM6 (bit 15)
- Clear TM11 (bit 14)
- Disabling sticky → non-sticky transition path that can deadlock PSE:
- Clear TM5 (bit 23)
- Preventing credit drops by keeping the control-flow clock enabled:
- Set TM9 (bit 21)
These changes are applied via NIX_AF_SQM_DBG_CTL_STATUS. With this
configuration the SQM/PSE maintain forward progress under load without
credit loss, at the cost of disabling sticky optimizations. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: dummy-hcd: Fix interrupt synchronization error
This fixes an error in synchronization in the dummy-hcd driver. The
error has a somewhat involved history. The synchronization mechanism
was introduced by commit 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous
synchronization change"), which added an emulated "interrupts enabled"
flag together with code emulating synchronize_irq() (it waits until
all current handler callbacks have returned).
But the emulated interrupt-disable occurred too late, after the driver
containing the handler callback routines had been told that it was
unbound and no more callbacks would occur. Commit 4a5d797a9f9c ("usb:
gadget: dummy_hcd: fix gpf in gadget_setup") tried to fix this by
moving the synchronize_irq() emulation code from dummy_stop() to
dummy_pullup(), which runs before the unbind callback.
There still were races, though, because the emulated interrupt-disable
still occurred too late. It couldn't be moved to dummy_pullup(),
because that routine can be called for reasons other than an impending
unbind. Therefore commits 7dc0c55e9f30 ("USB: UDC core: Add
udc_async_callbacks gadget op") and 04145a03db9d ("USB: UDC: Implement
udc_async_callbacks in dummy-hcd") added an API allowing the UDC core
to tell dummy-hcd exactly when emulated interrupts and their callbacks
should be disabled.
That brings us to the current state of things, which is still wrong
because the emulated synchronize_irq() occurs before the emulated
interrupt-disable! That's no good, beause it means that more emulated
interrupts can occur after the synchronize_irq() emulation has run,
leading to the possibility that a callback handler may be running when
the gadget driver is unbound.
To fix this, we have to move the synchronize_irq() emulation code yet
again, to the dummy_udc_async_callbacks() routine, which takes care of
enabling and disabling emulated interrupt requests. The
synchronization will now run immediately after emulated interrupts are
disabled, which is where it belongs. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: strictly check for maximum number of actions
The maximum number of flowtable hardware offload actions in IPv6 is:
* ethernet mangling (4 payload actions, 2 for each ethernet address)
* SNAT (4 payload actions)
* DNAT (4 payload actions)
* Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing)
for QinQ.
* Redirect (1 action)
Which makes 17, while the maximum is 16. But act_ct supports for tunnels
actions too. Note that payload action operates at 32-bit word level, so
mangling an IPv6 address takes 4 payload actions.
Update flow_action_entry_next() calls to check for the maximum number of
supported actions.
While at it, rise the maximum number of actions per flow from 16 to 24
so this works fine with IPv6 setups. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: caam - fix overflow on long hmac keys
When a key longer than block size is supplied, it is copied and then
hashed into the real key. The memory allocated for the copy needs to
be rounded to DMA cache alignment, as otherwise the hashed key may
corrupt neighbouring memory.
The copying is performed using kmemdup, however this leads to an overflow:
reading more bytes (aligned_len - keylen) from the keylen source buffer.
Fix this by replacing kmemdup with kmalloc, followed by memcpy. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: force responder MITM requirements before building the pairing response
smp_cmd_pairing_req() currently builds the pairing response from the
initiator auth_req before enforcing the local BT_SECURITY_HIGH
requirement. If the initiator omits SMP_AUTH_MITM, the response can
also omit it even though the local side still requires MITM.
tk_request() then sees an auth value without SMP_AUTH_MITM and may
select JUST_CFM, making method selection inconsistent with the pairing
policy the responder already enforces.
When the local side requires HIGH security, first verify that MITM can
be achieved from the IO capabilities and then force SMP_AUTH_MITM in the
response in both rsp.auth_req and auth. This keeps the responder auth bits
and later method selection aligned. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: prevent possible UaF in addrconf_permanent_addr()
The mentioned helper try to warn the user about an exceptional
condition, but the message is delivered too late, accessing the ipv6
after its possible deletion.
Reorder the statement to avoid the possible UaF; while at it, place the
warning outside the idev->lock as it needs no protection. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: require a full NFS mode SID before reading mode bits
parse_dacl() treats an ACE SID matching sid_unix_NFS_mode as an NFS
mode SID and reads sid.sub_auth[2] to recover the mode bits.
That assumes the ACE carries three subauthorities, but compare_sids()
only compares min(a, b) subauthorities. A malicious server can return
an ACE with num_subauth = 2 and sub_auth[] = {88, 3}, which still
matches sid_unix_NFS_mode and then drives the sub_auth[2] read four
bytes past the end of the ACE.
Require num_subauth >= 3 before treating the ACE as an NFS mode SID.
This keeps the fix local to the special-SID mode path without changing
compare_sids() semantics for the rest of cifsacl. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Fix race in DMA ring dequeue
The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for
multiple transfers that timeout around the same time. However, the
function is not serialized and can race with itself.
When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes
incomplete transfers, and then restarts the ring. If another timeout
triggers a parallel call into the same function, the two instances may
interfere with each other - stopping or restarting the ring at unexpected
times.
Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to
itself. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix use-after-free race in VM acquire
Replace non-atomic vm->process_info assignment with cmpxchg()
to prevent race when parent/child processes sharing a drm_file
both try to acquire the same VM after fork().
(cherry picked from commit c7c573275ec20db05be769288a3e3bb2250ec618) |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused. |
| In LemonLDAP::NG before 2.16.7 and 2.17 through 2.21 before 2.21.3, OS command injection can occur in the Safe jail. It does not Localize _ during rule evaluation. Thus, an administrator who can edit a rule evaluated by the Safe jail can execute commands on the server. |
| The Custom css-js-php WordPress plugin through 2.0.7 does not properly sanitize user input before using it in a SQL query, and the result is passed to eval(), allowing unauthenticated users to execute arbitrary PHP code on the server. |
| Dell PowerProtect Data Domain appliances, versions 7.7.1.0 through 8.7.0.0, LTS2025 release versions 8.3.1.0 through 8.3.1.20, LTS2024 release versions 7.13.1.0 through 7.13.1.60 contain an improper privilege management vulnerability.
A high privileged attacker with local access could potentially exploit this vulnerability, leading to elevation of privileges to access unauthorized delete operation. |
| The Elasticsearch logging provider, when configured with a `host` URL that embeds credentials (for example `https://user:password@server.example.com:9200`), wrote the full host URL — including the embedded credentials — into task logs. Any user with task-log read permission could harvest the backend credentials. Users are advised to upgrade to `apache-airflow-providers-elasticsearch` 6.5.3 or later and, as a defense-in-depth measure, configure the backend credentials via a secret backend rather than embedding them in the `[elasticsearch] host` URL. |
| The OpenSearch logging provider, when configured with a `host` URL that embeds credentials (for example `https://user:password@server.example.com:9200`), wrote the full host URL — including the embedded credentials — into task logs. Any user with task-log read permission could harvest the backend credentials. Users are advised to upgrade to `apache-airflow-providers-opensearch` 1.9.1 or later and, as a defense-in-depth measure, configure the backend credentials via a secret backend rather than embedding them in the `[opensearch] host` URL. |
| Zephyr sockets created with `IPPROTO_TLS_1_3` can still negotiate a TLS 1.2 connection when both TLS versions are enabled in Kconfig, because the socket-level protocol selection is not propagated to mbedTLS (e.g. via `mbedtls_ssl_conf_min_tls_version`). The ClientHello advertises both versions and the peer can establish TLS 1.2, so applications that assumed `IPPROTO_TLS_1_3` enforces TLS 1.3 may silently use TLS 1.2 and remain exposed to TLS 1.2-specific weaknesses. As a workaround, the `TLS_CIPHERSUITE_LIST` socket option can be restricted to TLS 1.3-only cipher suites. |
| WebDyne::Session versions through 2.075 for Perl generates the session id insecurely.
The session handler generates the session id from an MD5 hash seeded with a call to the built-in rand() function. The rand function is passed a maximum value based on the process id, the epoch time and the reference address of the object, but this information will have no effect on the overall quality of the seed of the message digest.
The rand function is seeded by 32-bits and is predictable. It is considered unsuitable for cryptographic purposes.
Predictable session ids could allow an attacker to gain access to systems.
Note that WebDyne::Session versions 1.042 and earlier appear to be in separate distributions from WebDyne. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Decrement re_receiving on the early exit paths
In the event that rpcrdma_post_recvs() fails to create a work request
(due to memory allocation failure, say) or otherwise exits early, we
should decrement ep->re_receiving before returning. Otherwise we will
hang in rpcrdma_xprt_drain() as re_receiving will never reach zero and
the completion will never be triggered.
On a system with high memory pressure, this can appear as the following
hung task:
INFO: task kworker/u385:17:8393 blocked for more than 122 seconds.
Tainted: G S E 6.19.0 #3
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u385:17 state:D stack:0 pid:8393 tgid:8393 ppid:2 task_flags:0x4248060 flags:0x00080000
Workqueue: xprtiod xprt_autoclose [sunrpc]
Call Trace:
<TASK>
__schedule+0x48b/0x18b0
? ib_post_send_mad+0x247/0xae0 [ib_core]
schedule+0x27/0xf0
schedule_timeout+0x104/0x110
__wait_for_common+0x98/0x180
? __pfx_schedule_timeout+0x10/0x10
wait_for_completion+0x24/0x40
rpcrdma_xprt_disconnect+0x444/0x460 [rpcrdma]
xprt_rdma_close+0x12/0x40 [rpcrdma]
xprt_autoclose+0x5f/0x120 [sunrpc]
process_one_work+0x191/0x3e0
worker_thread+0x2e3/0x420
? __pfx_worker_thread+0x10/0x10
kthread+0x10d/0x230
? __pfx_kthread+0x10/0x10
ret_from_fork+0x273/0x2b0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery
In case of a TX error CQE, a recovery flow is triggered,
mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc,
desyncing the DMA FIFO producer and consumer.
After recovery, the producer pushes new DMA entries at the old
dma_fifo_pc, while the consumer reads from position 0.
This causes us to unmap stale DMA addresses from before the recovery.
The DMA FIFO is a purely software construct with no HW counterpart.
At the point of reset, all WQEs have been flushed so dma_fifo_cc is
already equal to dma_fifo_pc. There is no need to reset either counter,
similar to how skb_fifo pc/cc are untouched.
Remove the 'dma_fifo_cc = 0' reset.
This fixes the following WARNING:
WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90
Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables]
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:iommu_dma_unmap_page+0x79/0x90
Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00
Call Trace:
<IRQ>
? __warn+0x7d/0x110
? iommu_dma_unmap_page+0x79/0x90
? report_bug+0x16d/0x180
? handle_bug+0x4f/0x90
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? iommu_dma_unmap_page+0x79/0x90
? iommu_dma_unmap_page+0x2e/0x90
dma_unmap_page_attrs+0x10d/0x1b0
mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core]
mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core]
mlx5e_napi_poll+0x8b/0xac0 [mlx5_core]
__napi_poll+0x24/0x190
net_rx_action+0x32a/0x3b0
? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core]
? notifier_call_chain+0x35/0xa0
handle_softirqs+0xc9/0x270
irq_exit_rcu+0x71/0xd0
common_interrupt+0x7f/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40 |
