Export limit exceeded: 20867 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20867 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-45901 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: revert commit_mutex usage in reset path It causes circular lock dependency between commit_mutex, nfnl_subsys_ipset and nlk_cb_mutex when nft reset, ipset list, and iptables-nft with '-m set' rule run at the same time. Previous patches made it safe to run individual reset handlers concurrently so commit_mutex is no longer required to prevent this. | ||||
| CVE-2026-45897 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_counter: serialize reset with spinlock Add a global static spinlock to serialize counter fetch+reset operations, preventing concurrent dump-and-reset from underrunning values. The lock is taken before fetching the total so that two parallel resets cannot both read the same counter values and then both subtract them. A global lock is used for simplicity since resets are infrequent. If this becomes a bottleneck, it can be replaced with a per-net lock later. | ||||
| CVE-2025-68299 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix delayed allocation of a cell's anonymous key The allocation of a cell's anonymous key is done in a background thread along with other cell setup such as doing a DNS upcall. In the reported bug, this is triggered by afs_parse_source() parsing the device name given to mount() and calling afs_lookup_cell() with the name of the cell. The normal key lookup then tries to use the key description on the anonymous authentication key as the reference for request_key() - but it may not yet be set and so an oops can happen. This has been made more likely to happen by the fix for dynamic lookup failure. Fix this by firstly allocating a reference name and attaching it to the afs_cell record when the record is created. It can share the memory allocation with the cell name (unfortunately it can't just overlap the cell name by prepending it with "afs@" as the cell name already has a '.' prepended for other purposes). This reference name is then passed to request_key(). Secondly, the anon key is now allocated on demand at the point a key is requested in afs_request_key() if it is not already allocated. A mutex is used to prevent multiple allocation for a cell. Thirdly, make afs_request_key_rcu() return NULL if the anonymous key isn't yet allocated (if we need it) and then the caller can return -ECHILD to drop out of RCU-mode and afs_request_key() can be called. Note that the anonymous key is kind of necessary to make the key lookup cache work as that doesn't currently cache a negative lookup, but it's probably worth some investigation to see if NULL can be used instead. | ||||
| CVE-2025-40307 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: exfat: validate cluster allocation bits of the allocation bitmap syzbot created an exfat image with cluster bits not set for the allocation bitmap. exfat-fs reads and uses the allocation bitmap without checking this. The problem is that if the start cluster of the allocation bitmap is 6, cluster 6 can be allocated when creating a directory with mkdir. exfat zeros out this cluster in exfat_mkdir, which can delete existing entries. This can reallocate the allocated entries. In addition, the allocation bitmap is also zeroed out, so cluster 6 can be reallocated. This patch adds exfat_test_bitmap_range to validate that clusters used for the allocation bitmap are correctly marked as in-use. | ||||
| CVE-2025-40098 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_get_acpi_mute_state() Return value of a function acpi_evaluate_dsm() is dereferenced without checking for NULL, but it is usually checked for this function. acpi_evaluate_dsm() may return NULL, when acpi_evaluate_object() returns acpi_status other than ACPI_SUCCESS, so add a check to prevent the crach. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-39901 | 1 Linux | 1 Linux Kernel | 2026-08-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: i40e: remove read access to debugfs files The 'command' and 'netdev_ops' debugfs files are a legacy debugging interface supported by the i40e driver since its early days by commit 02e9c290814c ("i40e: debugfs interface"). Both of these debugfs files provide a read handler which is mostly useless, and which is implemented with questionable logic. They both use a static 256 byte buffer which is initialized to the empty string. In the case of the 'command' file this buffer is literally never used and simply wastes space. In the case of the 'netdev_ops' file, the last command written is saved here. On read, the files contents are presented as the name of the device followed by a colon and then the contents of their respective static buffer. For 'command' this will always be "<device>: ". For 'netdev_ops', this will be "<device>: <last command written>". But note the buffer is shared between all devices operated by this module. At best, it is mostly meaningless information, and at worse it could be accessed simultaneously as there doesn't appear to be any locking mechanism. We have also recently received multiple reports for both read functions about their use of snprintf and potential overflow that could result in reading arbitrary kernel memory. For the 'command' file, this is definitely impossible, since the static buffer is always zero and never written to. For the 'netdev_ops' file, it does appear to be possible, if the user carefully crafts the command input, it will be copied into the buffer, which could be large enough to cause snprintf to truncate, which then causes the copy_to_user to read beyond the length of the buffer allocated by kzalloc. A minimal fix would be to replace snprintf() with scnprintf() which would cap the return to the number of bytes written, preventing an overflow. A more involved fix would be to drop the mostly useless static buffers, saving 512 bytes and modifying the read functions to stop needing those as input. Instead, lets just completely drop the read access to these files. These are debug interfaces exposed as part of debugfs, and I don't believe that dropping read access will break any script, as the provided output is pretty useless. You can find the netdev name through other more standard interfaces, and the 'netdev_ops' interface can easily result in garbage if you issue simultaneous writes to multiple devices at once. In order to properly remove the i40e_dbg_netdev_ops_buf, we need to refactor its write function to avoid using the static buffer. Instead, use the same logic as the i40e_dbg_command_write, with an allocated buffer. Update the code to use this instead of the static buffer, and ensure we free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on multiple devices, and allows us to remove the now unused static buffer along with removing the read access. | ||||
| CVE-2025-38299 | 2 Linux, Mediatek | 2 Linux Kernel, Mt8195 | 2026-08-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8195: Set ETDM1/2 IN/OUT to COMP_DUMMY() ETDM2_IN_BE and ETDM1_OUT_BE are defined as COMP_EMPTY(), in the case the codec dai_name will be null. Avoid a crash if the device tree is not assigning a codec to these links. [ 1.179936] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 1.181065] Mem abort info: [ 1.181420] ESR = 0x0000000096000004 [ 1.181892] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.182576] SET = 0, FnV = 0 [ 1.182964] EA = 0, S1PTW = 0 [ 1.183367] FSC = 0x04: level 0 translation fault [ 1.183983] Data abort info: [ 1.184406] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 1.185097] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1.185766] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1.186439] [0000000000000000] user address but active_mm is swapper [ 1.187239] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 1.188029] Modules linked in: [ 1.188420] CPU: 7 UID: 0 PID: 70 Comm: kworker/u32:1 Not tainted 6.14.0-rc4-next-20250226+ #85 [ 1.189515] Hardware name: Radxa NIO 12L (DT) [ 1.190065] Workqueue: events_unbound deferred_probe_work_func [ 1.190808] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.191683] pc : __pi_strcmp+0x24/0x140 [ 1.192170] lr : mt8195_mt6359_soc_card_probe+0x224/0x7b0 [ 1.192854] sp : ffff800083473970 [ 1.193271] x29: ffff800083473a10 x28: 0000000000001008 x27: 0000000000000002 [ 1.194168] x26: ffff800082408960 x25: ffff800082417db0 x24: ffff800082417d88 [ 1.195065] x23: 000000000000001e x22: ffff800082dbf480 x21: ffff800082dc07b8 [ 1.195961] x20: 0000000000000000 x19: 0000000000000013 x18: 00000000ffffffff [ 1.196858] x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000006 [ 1.197755] x14: ffff800082407af0 x13: 6e6f69737265766e x12: 692d6b636f6c6374 [ 1.198651] x11: 0000000000000002 x10: ffff80008240b920 x9 : 0000000000000018 [ 1.199547] x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000 [ 1.200443] x5 : 0000000000000000 x4 : 8080808080000000 x3 : 303933383978616d [ 1.201339] x2 : 0000000000000000 x1 : ffff80008240b920 x0 : 0000000000000000 [ 1.202236] Call trace: [ 1.202545] __pi_strcmp+0x24/0x140 (P) [ 1.203029] mtk_soundcard_common_probe+0x3bc/0x5b8 [ 1.203644] platform_probe+0x70/0xe8 [ 1.204106] really_probe+0xc8/0x3a0 [ 1.204556] __driver_probe_device+0x84/0x160 [ 1.205104] driver_probe_device+0x44/0x130 [ 1.205630] __device_attach_driver+0xc4/0x170 [ 1.206189] bus_for_each_drv+0x8c/0xf8 [ 1.206672] __device_attach+0xa8/0x1c8 [ 1.207155] device_initial_probe+0x1c/0x30 [ 1.207681] bus_probe_device+0xb0/0xc0 [ 1.208165] deferred_probe_work_func+0xa4/0x100 [ 1.208747] process_one_work+0x158/0x3e0 [ 1.209254] worker_thread+0x2c4/0x3e8 [ 1.209727] kthread+0x134/0x1f0 [ 1.210136] ret_from_fork+0x10/0x20 [ 1.210589] Code: 54000401 b50002c6 d503201f f86a6803 (f8408402) [ 1.211355] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2026-64211 | 1 Linux | 1 Linux Kernel | 2026-08-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: srcu: Don't queue workqueue handlers to never-online CPUs While an srcu_struct structure is in the midst of switching from CPU-0 to all-CPUs state, it can attempt to invoke callbacks for CPUs that have never been online. Worse yet, it can attempt in invoke callbacks for CPUs that never will be online, even including imaginary CPUs not in cpu_possible_mask. This can cause hangs on s390, which is not set up to deal with workqueue handlers being scheduled on such CPUs. This commit therefore causes Tree SRCU to refrain from queueing workqueue handlers on CPUs that have not yet (and might never) come online. Because callbacks are not invoked on CPUs that have not been online, it is an error to invoke call_srcu(), synchronize_srcu(), or synchronize_srcu_expedited() on a CPU that is not yet fully online. However, it turns out to be less code to redirect the callbacks from too-early invocations of call_srcu() than to warn about such invocations. This commit therefore also redirects callbacks queued on not-yet-fully-online CPUs to the boot CPU. | ||||
| CVE-2026-64212 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it In iwl_mld_remove_link, the link->fw_id is saved at the beginning of the function so we have it after we freed the link. But the link pointer can be NULL, and is not checked when the fw_id is stored. Fix it by simply freeing the link at the end of the function. fFixes: 0e66a39f4f0e ("wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link()") | ||||
| CVE-2026-64227 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: driver: Check ACPI_COMPANION() against NULL during probe Since every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), platform drivers that rely on the existence of a device's ACPI companion object should verify its presence. Accordingly, add requisite ACPI_COMPANION() or ACPI_HANDLE() checks against NULL to 13 platform drivers handling core ACPI devices. Also change the value returned by the ACPI thermal zone driver when the device's ACPI companion is not present to -ENODEV for consistency with the other drivers. | ||||
| CVE-2026-64235 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines With CONFIG_CALL_DEPTH_TRACKING enabled on an x86 retbleed-affected platform (eg: Skylake), with retbleed=stuff, registering a dynamic ftrace trampoline crashes on the first call into the traced function: BUG: unable to handle page fault for address: ffff88817ae18880 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 4b53067 P4D 4b53067 PUD 0 Oops: Oops: 0002 [#1] SMP PTI CPU: 3 UID: 0 PID: 187 Comm: usleep Not tainted 7.0.10 #243 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 Code: 24 78 00 00 00 00 48 89 ea 48 89 54 24 20 48 8b b4 24 b8 00 00 00 48 8b bc 24 b0 00 00 00 48 89 bc 24 80 00 00 00 48 83 ef 05 <65> 48 c1 3d 1f a8 b6 02 05 48 8b 15 f6 00 00 00 4c 89 3c 24 4c 89 Call Trace: <TASK> ? find_held_lock ? exc_page_fault ? lock_release ? __x64_sys_clock_nanosleep ? lockdep_hardirqs_on_prepare ? trace_hardirqs_on __x64_sys_clock_nanosleep do_syscall_64 ? exc_page_fault ? call_depth_return_thunk entry_SYSCALL_64_after_hwframe ... Kernel panic - not syncing: Fatal exception This small reproducer allows to easily trigger the crash: # echo 'p __x64_sys_clock_nanosleep' > /sys/kernel/tracing/kprobe_events # echo 1 > /sys/kernel/tracing/events/kprobes/p___x64_sys_clock_nanosleep_0/enable # usleep 1 Monitoring the crash under GDB points to the exact instruction in charge of incrementing the call depth: sarq $5, %gs:__x86_call_depth(%rip) This instruction matches the one inserted by the ftrace_regs_caller from ftrace_64.S. This emitted code was likely working fine until the introduction of 59bec00ace28 ("x86/percpu: Introduce %rip-relative addressing to PER_CPU_VAR()"): it has made the call depth accounting addressing relative to $rip, instead of being based on an absolute address. As this code exact location depends on where the trampoline lives in memory, the corresponding displacement needs to be adjusted at runtime to actually correctly find the per-cpu __x86_call_depth value, otherwise the targeted address is wrong, leading to the page fault seen above. Fix the %rip-relative displacement of the copied CALL_DEPTH_ACCOUNT instruction (from ftrace_regs_caller) by calling text_poke_apply_relocation(), as it is done for example by the x86 BPF JIT compiler through x86_call_depth_emit_accounting(). This corrects both CALL_DEPTH_ACCOUNT slots, in ftrace_caller and ftrace_regs_caller. [ bp: Massage. ] | ||||
| CVE-2026-64237 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: elan_i2c - validate firmware size before use Ensure that the firmware file is large enough to contain the expected number of pages and the signature (which resides at the end of the firmware blob) before accessing them to prevent potential out-of-bounds reads. | ||||
| CVE-2026-64249 | 1 Linux | 1 Linux Kernel | 2026-08-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fpga: region: fix use-after-free in child_regions_with_firmware() Move of_node_put(child_region) after the error print to avoid accessing freed memory when pr_err() references child_region. [ Yilun: Fix the Fixes tag ] | ||||
| CVE-2026-64251 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pwrseq: core: fix use-after-free in pwrseq_debugfs_seq_next() pwrseq_debugfs_seq_next() declares 'next' with __free(put_device), which causes put_device() to be called on the returned pointer when the variable goes out of scope. This results in a use-after-free since the seq_file framework receives a pointer whose reference has already been dropped. Simply removing __free(put_device) would fix the UAF but would leak the reference acquired by bus_find_next_device(), as stop() only calls up_read(&pwrseq_sem) and never releases the device reference. Fix this by making the reference counting consistent across all seq_file callbacks, matching the standard pattern used by PCI and SCSI: - start(): use get_device() so it returns a referenced pointer. - next(): explicitly put_device(curr) to release the previous device's reference (no NULL check needed - the seq_file framework only calls next() while the previous return was non-NULL). - stop(): put_device(data) to release the last iterated device's reference, with a NULL guard since stop() may be called with NULL when start() returned NULL or next() reached end-of-sequence. | ||||
| CVE-2026-64254 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR When BAR_PEER_SPAD and BAR_CONFIG share one PCI BAR, the module teardown path ends up calling pci_iounmap() on the same iomem with some offset, which is unnecessary and triggers a kernel warning like the following: Trying to vunmap() nonexistent vm area (0000000069a5ffe8) WARNING: mm/vmalloc.c:3470 at vunmap+0x58/0x68, CPU#5: modprobe/2937 [...] Call trace: vunmap+0x58/0x68 (P) iounmap+0x34/0x48 pci_iounmap+0x2c/0x40 ntb_epf_pci_remove+0x44/0x80 [ntb_hw_epf] pci_device_remove+0x48/0xf8 device_remove+0x50/0x88 device_release_driver_internal+0x1c8/0x228 driver_detach+0x50/0xb0 bus_remove_driver+0x74/0x100 driver_unregister+0x34/0x68 pci_unregister_driver+0x34/0xa0 ntb_epf_pci_driver_exit+0x14/0xfe0 [ntb_hw_epf] [...] Fix it by unmapping only when PEER_SPAD and CONFIG use difference bars. | ||||
| CVE-2026-64264 | 1 Linux | 1 Linux Kernel | 2026-08-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse-uring: fix EFAULT clobber in fuse_uring_commit copy_from_user() returns the number of bytes not copied as an unsigned residual on failure (1..sizeof(struct fuse_out_header)). fuse_uring_commit stores that residual in ssize_t err, sets req->out.h.error to -EFAULT, then jumps to out: with err still holding the positive residual. err = copy_from_user(&req->out.h, &ent->headers->in_out, sizeof(req->out.h)); if (err) { req->out.h.error = -EFAULT; goto out; /* err is the positive residual */ } ... out: fuse_uring_req_end(ent, req, err); fuse_uring_req_end() then runs if (error) req->out.h.error = error; which overwrites the just-assigned -EFAULT with the positive residual. FUSE callers such as fuse_simple_request() test err < 0 to detect failure, so the positive value is interpreted as success and the caller proceeds with an uninitialised or partial req->out.args. Fix by assigning err = -EFAULT in the failure branch before jumping to out, so fuse_uring_req_end() receives a negative errno and sets req->out.h.error to -EFAULT. | ||||
| CVE-2026-64266 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: re-lock request before returning from fuse_ref_folio() fuse_ref_folio() unlocks the request but does not re-lock it before returning. fuse_chan_abort() can end the request and the async end callback (eg fuse_writepage_free()) can free the args while the subsequent copy chain logic after fuse_ref_folio() accesses them, leading to use-after-free issues. Fix this by locking the request in fuse_ref_folio() before returning. | ||||
| CVE-2026-64278 | 1 Linux | 1 Linux Kernel | 2026-08-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx-lpi2c: mark I2C adapter when hardware is powered down On some i.MX platforms, certain I2C client drivers keep a periodic workqueue which continues to trigger I2C transfers. During system suspend/resume, there exists a time window between: - suspend_noirq and the system entering suspend - the system starting to resume and resume_noirq In this window, the I2C controller resources such as clock and pinctrl may already be disabled or not yet restored. If a workqueue triggers an I2C transfer in this period, the driver attempts to access I2C registers while the hardware resources are unavailable, which may lead to system hang. Mark the I2C adapter as suspended during noirq suspend and block new transfers until resume, ensuring that I2C transfers are only issued when hardware resources are available. | ||||
| CVE-2026-64279 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: core: fix adapter deregistration race Adapters can be looked up by their id using i2c_get_adapter() which takes a reference to the embedded struct device. Remove the adapter from the IDR before tearing it down during deregistration (and on registration failure) to make sure its resources are not accessed after having been freed (e.g. the device name). | ||||
| CVE-2026-64283 | 1 Linux | 1 Linux Kernel | 2026-08-02 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: Treat memslot binding offset+size as unsigned values When binding a memslot to a guest_memfd file, treat the offset and size as unsigned values to fix a bug where the sum of the two can result in a false negative when checking for overflow against the size of the file. Passing unsigned values also avoids relying on somewhat obscure checks in other flows for safety, and tracks the offset and size as they are intended to be tracked, as unsigned values. On 64-bit kernels, the number of pages a memslot contains and thus the size (and offset) of its guest_memfd binding are unsigned 64-bit values. Taking the offset+size as an loff_t instead of a uoff_t inadvertently converts the unsigned value to a signed value if the offset and/or size is massive. Locally storing the offset and size as signed values is benign in and of itself (though even that is *extremely* difficult to discern), but operating on their sum is not. For the offset, KVM explicitly checks against a negative value, which might seem like a bug as KVM could incorrectly reject a legitimate binding, but that's not actually the case as KVM_CREATE_GUEST_MEMFD takes a signed value for its size, i.e. a would-be-negative offset is also greater than the maximum possible size of any guest_memfd file. Regarding the size, while KVM lacks an explicit check for a negative value, i.e. seemingly has a flawed overflow check, KVM restricts the number of pages in a single memslot to the largest positive signed 32-bit value: if (id < KVM_USER_MEM_SLOTS && (mem->memory_size >> PAGE_SHIFT) > KVM_MEM_MAX_NR_PAGES) return -EINVAL; and so that maximum "size" will ever be is 0x7fffffff000. The sum of the two is, however, problematic. While the size is restricted by KVM's memslot logic, the offset is not, i.e. the offset is completely unchecked until the "offset + size > i_size_read(inode)" check. If the offset is the (nearly) largest possible _positive_ value, then adding size to the offset can result in a signed, negative 64-bit value. When compared against the size of the file (guaranteed to be positive), the negative sum is always smaller, and KVM incorrectly allows the absurd offset. Opportunistically add missing includes in kvm_mm.h (instead of relying on its parents). | ||||