Export limit exceeded: 390744 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (390744 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90472 | 1 Msgpack | 1 Messagepack | 2026-09-12 | 5.3 Medium |
| msgpack-java through 0.9.12 contains a stack overflow vulnerability in MessageUnpacker.unpackValue() that recursively deserializes arrays and maps without nesting depth limits. Attackers can craft payloads with deeply nested arrays to exhaust the deserializing thread's stack and trigger StackOverflowError, causing per-request deserialization failures. | ||||
| CVE-2026-89522 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: staging/ipu7: fix async notifier UAF on probe error path isys_register_devices() registers the V4L2 async notifier via isys_notifier_init(). If a subsequent probe step such as isys_fw_log_init() fails, isys_probe() jumps to the out_cleanup label which only calls isys_unregister_devices(). That helper tears down the video devices, subdevices, V4L2 device and media device, but never unregisters or cleans up the async notifier. As a result the notifier stays chained in the global notifier_list while the enclosing struct ipu7_isys is freed by devres, leading to list corruption and a use-after-free the next time the list is walked. The remove path already does the right thing by calling isys_notifier_cleanup() before isys_unregister_devices(). Mirror that on the probe error path so the notifier is unregistered and cleaned up before the device is torn down. | ||||
| CVE-2026-89523 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: cancel pending mlo_pm_work If the device is reset, suspended or unregistered within that window, the pending work can still run and access vif/bss data that may already be freed, or send MCU commands while the firmware is not available. Add cancel_delayed_work_sync(&dev->mlo_pm_work) in all relevant teardown and suspend paths: - mt7925_mac_reset_work() (chip reset recovery) - mt7925e_unregister_device() (PCIe unbind) - mt7925_pci_suspend() (PCIe bus suspend) - mt7925_suspend() (mac80211 suspend) - mt7925u_suspend() (USB bus / runtime suspend) This ensures the work is stopped before the device state becomes invalid. | ||||
| CVE-2026-89532 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Fix pcl_for_each_segment for empty chunks When a parsed chunk list contains a chunk whose ch_segcount is zero, pcl_for_each_segment computes its inclusive upper bound as &chunk->ch_segments[ch_segcount - 1]. ch_segcount is u32, so the subtraction wraps to 0xFFFFFFFF and the bound lands far past the ch_segments flex array. The loop body then walks unrelated memory at sizeof(struct svc_rdma_segment) stride until it faults. A zero-segcount chunk is reachable from the wire: xdr_check_write_chunk() only rejects segcount values greater than rc_maxpages, and pcl_alloc_write() links a freshly allocated chunk onto rc_write_pcl/rc_reply_pcl before its segment-fill loop runs, so a Write or Reply chunk advertising zero segments leaves ch_segcount == 0 on the list. When the transport has negotiated Send-With-Invalidate, svc_rdma_get_inv_rkey() iterates all four PCLs with pcl_for_each_segment and dereferences segment->rs_handle on each iteration, turning the underflow into an out-of-bounds read and a general protection fault. xdr_check_write_list / xdr_check_reply_chunk pcl_alloc_write() chunk = pcl_alloc_chunk(...) /* ch_segcount = 0 */ list_add_tail(&chunk->ch_list, &pcl->cl_chunks) /* fill loop iterates zero times for wire segcount 0 */ svc_rdma_get_inv_rkey() pcl_for_each_chunk(rc_write_pcl) pcl_for_each_segment(segment, chunk) pos <= &ch_segments[0u - 1u] /* 0xFFFFFFFF */ segment->rs_handle /* OOB read -> GPF */ Fix by switching the macro to a half-open upper bound that uses ch_segcount directly. For ch_segcount == 0 the loop start equals the loop end and the body is skipped; for ch_segcount > 0 the iteration range is unchanged. All six existing call sites in net/sunrpc/xprtrdma/svc_rdma_recvfrom.c and net/sunrpc/xprtrdma/svc_rdma_rw.c remain correct under the new bound, so no caller changes are needed. | ||||
| CVE-2026-89551 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: xdr_buf_trim: clamp buf->len to avoid underflow xdr_buf_trim() trims `len` bytes from the tail of an xdr_buf by walking the tail, pages, and head iovecs. Each per-section step uses min_t() so it never removes more bytes than that section holds, but the final accounting at the fix_len label subtracts the total bytes actually consumed from buf->len without any clamp: fix_len: buf->len -= (len - trim); When the caller has set buf->len to a value smaller than the sum of the iov_lens, (len - trim) can exceed buf->len and the unsigned subtraction wraps to near UINT_MAX. gss_krb5_unwrap_v2() reaches xdr_buf_trim() in exactly that state: buf->head[0].iov_len -= GSS_KRB5_TOK_HDR_LEN + headskip; buf->len = len - (GSS_KRB5_TOK_HDR_LEN + headskip); xdr_buf_trim(buf, ec + GSS_KRB5_TOK_HDR_LEN + tailskip); buf->len is a small wire-derived value while the iov_lens are at page scale, so the per-section loops legitimately consume far more bytes than buf->len records. The wrapped buf->len then propagates as the authoritative stream bound into every downstream XDR decoder. Fix by clamping the decrement so buf->len bottoms out at zero: buf->len -= min_t(unsigned int, buf->len, len - trim); On the normal path where the iov_lens sum to buf->len, (len - trim) is always <= buf->len and the result is identical to before. No callers change behavior outside the underflow case. | ||||
| CVE-2026-89474 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: bq256xx: drain usb_work before freeing the charger The USB-PHY notifier queues usb_work, whose handler calls power_supply_changed(bq->charger). The reset devm action only unregisters the notifier and was registered before the power supplies, so devm frees bq->charger on unwind before the action runs; a usb_work still queued can then dereference it. Register the reset action after the power supplies, so it unregisters the notifiers and drains usb_work before the supplies are released. Initialize usb_work and obtain the PHY references before registering the notifiers, so the worker cannot run before the supplies exist. Found by static analysis. | ||||
| CVE-2026-89770 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iomap: don't free integrity payload that doesn't exist fs_bio_integrity_alloc might not allocate a bio integrity payload if PI verification is disabled on the block device. Check for that case before calling fs_bio_integrity_free in iomap_bio_read_folio_range_sync to avoid a NULL pointer dereferences. Make the branch cover the PI verification as well - while fs_bio_integrity_verify works without an integrity payload, it requires one to actually do useful work. | ||||
| CVE-2026-89487 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: only skb_tx_error() a packet we are about to drop queue_userspace_packet() borrows the packet skb -- it only copies it into a private netlink message (user_skb) and does not own it; on return do_execute_actions() keeps forwarding it through the flow's remaining actions. Its error path nevertheless calls skb_tx_error(skb), which via skb_zcopy_clear() does skb_shinfo(skb)->flags &= ~SKBFL_ALL_ZEROCOPY, stripping SKBFL_SHARED_FRAG from that live skb (skb_tx_error()'s kerneldoc says "skb must be freed afterwards"). For a MSG_ZEROCOPY skb carrying page-cache frags, SKBFL_SHARED_FRAG is what makes esp_input() skb_cow_data() before in-place AEAD; once it is stripped a later local ESP-in-UDP delivery decrypts in place over pages the sender does not own -- an unprivileged page-cache write (the "Fragnesia" primitive). do_execute_actions() ignores output_userspace()'s return value, so any action after a failed USERSPACE upcall inherits the stripped skb. Move the skb_tx_error() to the flow-miss drop path - the "default" branch of ovs_dp_process_packet()'s switch(error), before kfree_skb(). The call has been here since commit 36d5fe6a0007 ("core, nfqueue, openvswitch: Orphan frags in skb_zerocopy and handle errors") but was harmless until esp_input() began relying on SKBFL_SHARED_FRAG to gate in-place decrypt; only then did stripping it on a still-forwarded skb become a page-cache write primitive. | ||||
| CVE-2026-89561 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: fix NULL dereference of idev in ipv6_rpl_srh_rcv() ipv6_rpl_srh_rcv() dereferences idev from __in6_dev_get() without a NULL check when reading idev->cnf.rpl_seg_enabled. When the device's MTU drops below IPV6_MIN_MTU, addrconf_ifdown() clears dev->ip6_ptr through RCU_INIT_POINTER(). A packet that passed the idev check in ip6_rcv_core() can then reach ipv6_rpl_srh_rcv() with dev->ip6_ptr already NULL. Reproduced by flooding the receiving interface with ping6 traffic while flapping its MTU between 1500 and 1200: BUG: KASAN: null-ptr-deref in ipv6_rpl_srh_rcv+0xb3/0x1070 Read of size 4 at addr 00000000000006b4 by task ping6/394 CPU: 2 UID: 0 PID: 394 Comm: ping6 Not tainted 7.2.0-rc7-micro-vm-dev-00095-g24ef02f934ee #240 PREEMPT(full) Call Trace: <IRQ> kasan_report+0xc6/0x100 ipv6_rpl_srh_rcv+0xb3/0x1070 ip6_protocol_deliver_rcu+0x759/0x9a0 ip6_input_finish+0xa8/0x1b0 ip6_input+0xe1/0x490 ipv6_rcv+0x33d/0x460 __netif_receive_skb_one_core+0xd6/0x130 process_backlog+0x2cc/0xa00 __napi_poll.constprop.0+0x56/0x270 net_rx_action+0x327/0x730 handle_softirqs+0x11e/0x630 do_softirq+0xb3/0xf0 </IRQ> Both ipv6_rpl_srh_rcv() and ipv6_srh_rcv() are called only from ipv6_rthdr_rcv(), which already has an idev lookup. Fix the NULL dereference on the RPL path by checking idev in ipv6_rthdr_rcv(), before it calls either function. The callees take idev as an argument and no longer call __in6_dev_get(), so the packet is now dropped in one place, with SKB_DROP_REASON_IPV6DISABLED on both paths. | ||||
| CVE-2026-89632 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-before-check of ReparseDataLength in reparse_buf_ptr() reparse_buf_ptr() reads buf->ReparseDataLength before checking that count covers the full fixed header: buf = (struct reparse_data_buffer *)((u8 *)io + off); len = sizeof(*buf); /* 8 bytes */ rdlen = le16_to_cpu(buf->ReparseDataLength); /* offset 4, 2 bytes */ if (count < len || count < rdlen + len) /* check comes after */ struct reparse_data_buffer has ReparseDataLength at offset 4. If a server returns OutputCount < 6, the read at offset 4-5 reaches past the end of the received data. The off+count bounds against iov_len were already validated, but that does not protect against count being smaller than sizeof(*buf). Split the check: verify count >= sizeof(*buf) before reading ReparseDataLength, then verify count covers the data region. | ||||
| CVE-2026-89728 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i3c: renesas: Fix out-of-bounds access for newdevs mask When software initiates DAA (Dynamic Address Assignment), the controller reports the result via the NRSPQP (Normal Response Queue Port Register). The data length field of the response descriptor, which is accessible through the NRSPQP register, indicates the number of devices remaining after DAA. Consequently, when the bus is empty, this field contains the maximum number of devices supported by the controller (8 for the Renesas I3C controller). Adjust the condition that computes the newly discovered devices bitmask to prevent an out-of-bounds when the I3C bus is empty. | ||||
| CVE-2026-89531 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject connection when transport allocation fails handle_connect_req() returns without action when svc_rdma_create_xprt() fails to allocate the new transport. The CM core returns 0 for CONNECT_REQUEST events, so it does not destroy the new rdma_cm_id. Each allocation failure under memory pressure leaks one rdma_cm_id, and a remote peer driving connection attempts can amplify this. Reject the connection by returning a non-zero status from the CM event handler, which tells the CM core to destroy the orphaned cm_id. | ||||
| CVE-2026-89718 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: zram: fix out-of-bounds access in writeback_store() Patch series "zram: fix stale scan bounds after reinitialization". Both writeback_store() and read_block_state() derive their table scan bounds from zram->disksize before acquiring dev_lock. If the device is reset and reinitialized with a smaller disksize between that read and lock acquisition, the bound can describe the old table while the scan operates on the new one. This can lead to out-of-bounds slot accesses. Move both bound calculations under dev_lock so each bound remains consistent with the table throughout its scan. Keep the fixes separate because the affected interfaces originate from different commits and can be backported independently. This patch (of 2): writeback_store() calculates the table scan bounds before taking dev_lock. A reset followed by reconfiguration with a smaller disksize can therefore replace zram->table while writeback_store() is waiting for the lock. Once it acquires the lock, it sees an initialized device but scans the new table using the old upper bound, resulting in an out-of-bounds access. Calculate the number of pages while holding dev_lock so the scan bound matches the table protected by the lock. | ||||
| CVE-2026-89724 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: vicodec: fix out-of-bounds write in FWHT encoder vidioc_s_fmt_vid_out() sizes the encoder CAPTURE buffer from the compressed descriptor pixfmt_fwht, whose sizeimage_mult is 3: coded_w * coded_h * 3 + sizeof(struct fwht_cframe_hdr). fwht_encode_frame() encodes one plane per component, and an incompressible plane takes the FWHT_FRAME_UNENCODED path in encode_plane(), copying the plane verbatim. For a 4-component pixel format all four planes are full resolution (width_div == height_div == 1), so a frame that forces every plane through the unencoded fallback writes sizeof(struct fwht_cframe_hdr) + 4 * coded_w * coded_h bytes, overrunning the plane by coded_w * coded_h, which can result in corruption of adjacent kernel heap memory. Bump pixfmt_fwht.sizeimage_mult from 3 to 4, matching the largest components_num among the supported raw formats, so the capture buffer is always large enough for the unencoded fallback. | ||||
| CVE-2026-89730 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fpga: altera-cvp: Avoid out-of-bounds read in trailing byte write The trailing byte path in altera_cvp_send_block() dereferences a u32 pointer even when only 1-3 bytes remain in the input buffer. If the buffer ends at a page or scatterlist boundary, this can read past the valid image data and fault. Copy the remaining bytes into a zero-initialized u32 before writing the final word so only valid bytes are read from the input buffer. | ||||
| CVE-2026-89734 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: Fix null pointer dereference in uvcg_video_init() In uvcg_video_init(), if kthread_run_worker() fails, the error logged uses uvcg_err(), however, the pointer it uses: video->uvc is not assigned at this point, triggering a null pointer dereference. Fix this by directly using uvc->func which is assigned already. | ||||
| CVE-2026-89172 | 2026-09-12 | N/A | ||
| Improper protection of physical side channels vulnerability in Microchip AN1044, Microchip AN953, and Microchip SW300052. This issue affects AN1044: through A; AN953: through A; SW300052: through 2.6. | ||||
| CVE-2026-89619 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 6.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: intel-thc-hid: intel-quickspi: bound GET_REPORT response to the caller buffer quickspi_hid_raw_request() receives the caller's buffer length in len, but quickspi_get_report() never sees it and copies the whole device-supplied response into buf regardless: memcpy(buf, qsdev->report_buf, qsdev->report_len); qsdev->report_len comes from the input report the touch controller returns, while buf is sized to whatever the caller asked hidraw for through HIDIOCGFEATURE or HIDIOCGINPUT. A response larger than that overflows buf with device-controlled content. The intel-quicki2c sibling already passes the caller length down to quicki2c_get_report() and validates the response against it before the copy. Do the same here. | ||||
| CVE-2026-89695 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: cap decoded POSIX ACL count to bound sort cost nfsd4_decode_posixacl() reads a u32 entry count off the wire and passes it straight to posix_acl_alloc() and sort_pacl_range(). The latter is an O(n^2) bubble sort, so a client-chosen count drives unbounded CPU in the server's compound processing path. nfsd4_decode_posixacl() xdr_stream_decode_u32(&count) /* uncapped u32 */ posix_acl_alloc(count, GFP_KERNEL) sort_pacl_range(*acl, 0, count - 1) /* O(n^2) bubble sort */ The encoder side in the same file already rejects ACLs whose a_count exceeds NFS_ACL_MAX_ENTRIES, but the decoder introduced in commit 5fc51dfc2eb1 ("NFSD: Add support for XDR decoding POSIX draft ACLs") omitted the symmetric check. Fix by rejecting a wire count greater than NFS_ACL_MAX_ENTRIES with nfserr_inval, before any allocation, so the sort is bounded by NFS_ACL_MAX_ENTRIES^2 comparisons. While we're in here, also fix the nfserr_resource return if posix_acl_alloc() fails. That's not a legal error code for v4.1+. Change it to return nfserr_jukebox as that's more appropriate for memory allocation failures. | ||||
| CVE-2026-89705 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: restore rq_status_counter to even on all nfsd_dispatch() exit paths nfsd_dispatch() sets rq_status_counter to an odd value once a request has been decoded, and back to an even value once it has been fully processed, forming a seq-lock like protocol with the lockless reader in nfsd_nl_rpc_status_get_dumpit(). Only the fully successful path restored the counter to even. The cache-hit (RC_REPLY), drop (RC_DROPIT / RQ_DROPME) and encode-error paths all return after the odd-valued store without ever bringing the counter back to even. Once one of those paths is taken, rq_status_counter is left odd: the next request's decode ORs in 1 (still odd) and only a subsequent successful encode restores even. While stuck odd, the dumpit reader treats the rqstp fields as stable and its retry check compares against the same unchanging odd value, so it never detects concurrent mutation. This exposes actively mutating fields (e.g. args->ops / args->opcnt during compound decode and release) to the lockless reader, which can read past the end of the 8-element inline ops array. Add a helper that advances the counter to the next even value and call it on every return path that follows the odd-valued store. The decode-error path is left untouched as it is reached before the counter is set odd. | ||||