Export limit exceeded: 22388 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22388 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64364 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: fix out-of-bounds bit access on mt_io_flags mt_io_flags is a single unsigned long, but mt_process_slot(), mt_release_pending_palms() and mt_release_contacts() use it as a per-slot bitmap indexed by the slot number. That slot number is only bounded by td->maxcontacts, which is taken from the device's ContactCountMaximum feature report and can be up to 255, not by BITS_PER_LONG. As a result, a multitouch device that advertises a large contact count makes set_bit()/clear_bit() operate past the mt_io_flags word and corrupt the adjacent members of struct mt_device. The sticky-fingers release timer is the easiest way to reach this. mt_release_contacts() runs for (i = 0; i < mt->num_slots; i++) clear_bit(i, &td->mt_io_flags); with num_slots == maxcontacts. For maxcontacts around 250 the loop clears the bits that overlap td->applications.next, zeroing that list head, and the list_for_each_entry() that immediately follows then dereferences NULL. The kernel panics from timer (softirq) context. On a KASAN build this shows up as a general protection fault in mt_release_contacts() with a null-ptr-deref at offset 0x58, which is offsetof(struct mt_application, num_received). The state is reachable from an untrusted USB or Bluetooth HID multitouch device; no local privileges are required. Store the per-slot active state in a separately allocated bitmap sized for maxcontacts, the same pattern already used for pending_palm_slots, and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two "mt_io_flags & MT_IO_SLOTS_MASK" arming checks become bitmap_empty(td->active_slots, td->maxcontacts). Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the same commit to leave the low byte for the slot bits; with the slot bits gone it fits in bit 0 again, which also keeps it within the unsigned long on 32-bit. | ||||
| CVE-2026-64375 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: proc: protect ptrace_may_access() with exec_update_lock (FD links) proc_pid_get_link() and proc_pid_readlink() currently look up the task from the pid once, then do the ptrace access check on that task, then look up the task from the pid a second time to do the actual access. That's racy in several ways. To fix it, pass the task to the ->proc_get_link() handler, and instead of proc_fd_access_allowed(), introduce a new helper call_proc_get_link() that looks up and locks the task, does the access check, and calls ->proc_get_link(). | ||||
| CVE-2026-64380 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: harden POSIX SID length parsing posix_info_sid_size() reads sid[1] to obtain the subauthority count, but its existing boundary check still accepts buffers with only one remaining byte. Require two bytes before reading sid[1] so all client paths that reuse the helper reject truncated POSIX SIDs safely. | ||||
| CVE-2026-64381 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix next buffer leak in receive_encrypted_standard() receive_encrypted_standard() allocates next_buffer before checking whether the number of compound PDUs already reached MAX_COMPOUND. If the limit check fails, the function returns immediately and the newly allocated next_buffer is not assigned to server->smallbuf/server->bigbuf, making it leaked. Move the MAX_COMPOUND check before allocating next_buffer. | ||||
| CVE-2026-64383 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double-free in SMB2_flush() replay SMB2_flush() keeps its response buffer bookkeeping across replay attempts. If a replayable flush response is received and the retry then fails before cifs_send_recv() stores a replacement response, flush_exit will free the stale response pointer a second time. Reinitialize resp_buftype and rsp_iov at the top of the replay loop so cleanup only acts on response state produced by the current attempt. This fixes a double-free without changing replay handling for successful requests. | ||||
| CVE-2026-64384 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix change notify replay double-free A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_notify_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. | ||||
| CVE-2026-64387 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix query directory replay double-free A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_query_directory_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. | ||||
| CVE-2026-64411 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: terminate table name before find_table_lock() update_counters() and compat_update_counters() forward a user-supplied 32-byte table name to find_table_lock() without NUL-terminating it. On a lookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s", "ebtable_", name), and vsnprintf() reads past the name field and the stack object until it hits a zero byte. BUG: KASAN: stack-out-of-bounds in string (lib/vsprintf.c:648 lib/vsprintf.c:730) Read of size 1 at addr ffff8880119dfb20 by task exploit/147 Call Trace: ... string (lib/vsprintf.c:648 lib/vsprintf.c:730) vsnprintf (lib/vsprintf.c:2945) __request_module (kernel/module/kmod.c:150) do_update_counters.isra.0 (net/bridge/netfilter/ebtables.c:371 net/bridge/netfilter/ebtables.c:380) update_counters (net/bridge/netfilter/ebtables.c:1440) do_ebt_set_ctl (net/bridge/netfilter/ebtables.c:2573) nf_setsockopt (net/netfilter/nf_sockopt.c:101) ip_setsockopt (net/ipv4/ip_sockglue.c:1424) raw_setsockopt (net/ipv4/raw.c:847) __sys_setsockopt (net/socket.c:2393) ... compat_do_replace() shares the same unterminated name via compat_copy_ebt_replace_from_user(); terminate it there too so all find_table_lock() callers behave alike. The other callers already terminate the name after the copy. | ||||
| CVE-2026-64415 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/swap: add cond_resched() in swap_reclaim_full_clusters to prevent softlockup We hit a real softlockup in an internal stress test environment. The workload was LTP memory/swap stress on a large arm64 machine, with 320 CPUs, about 1TB memory and an 8.6GB swap device. The system was under heavy load and the swap device had a large number of full clusters. The softlockup was triggered during a stress test after about 3 days. So, add periodic cond_resched() calls during large full_clusters reclaim operations to prevent softlockup issues. Detailed call trace as follow: PID: 3817773 TASK: ffff0883bb28b780 CPU: 48 COMMAND: "kworker/48:7" #0 [ffff800080183d10] __crash_kexec at ffffa4c1361e5de4 #1 [ffff800080183d90] panic at ffffa4c1360d5e9c #2 [ffff800080183e20] watchdog_timer_fn at ffffa4c136231fa8 ... #16 [ffff8000c4ad3cb0] swap_cache_del_folio at ffffa4c1363e1614 #17 [ffff8000c4ad3ce0] __try_to_reclaim_swap at ffffa4c1363e4bfc #18 [ffff8000c4ad3d40] swap_reclaim_full_clusters at ffffa4c1363e5474 #19 [ffff8000c4ad3da0] swap_reclaim_work at ffffa4c1363e550c #20 [ffff8000c4ad3dc0] process_one_work at ffffa4c136102edc #21 [ffff8000c4ad3e10] worker_thread at ffffa4c136103398 #22 [ffff8000c4ad3e70] kthread at ffffa4c13610d95c | ||||
| CVE-2026-64446 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie() supplicant_ie is a 256-byte array in struct security_priv. The WPA and WPA2 IE copy paths use: memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2); where wpa_ielen is the raw IE length field (u8, 0-255). When a local user supplies a connect request via nl80211 with a crafted WPA IE of length 255, wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte into the adjacent last_mic_err_time field. rtw_parse_wpa_ie() does not prevent this: its length consistency check compares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255 when wpa_ie_len = 257, so the check passes silently. Add explicit bounds checks for both the WPA and WPA2 paths before the memcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds the supplicant_ie buffer. | ||||
| CVE-2026-64474 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfio: prevent infinite loop in vfio_mig_get_next_state() on blocked arc vfio_mig_get_next_state() walks vfio_from_fsm_table[] one step at a time, looping to skip optional states the device does not support until *next_fsm is supported. A blocked transition is encoded as VFIO_DEVICE_STATE_ERROR, which the trailing return reports as -EINVAL. The skip loop does not account for the ERROR sentinel. state_flags_table[ERROR] is ~0U and vfio_from_fsm_table[ERROR][*] is ERROR, so once *next_fsm becomes ERROR the loop condition stays true and *next_fsm never changes. The blocked arcs STOP_COPY -> PRE_COPY and STOP_COPY -> PRE_COPY_P2P map to ERROR yet pass the support check on a precopy-capable device, causing the loop to spin forever while holding the driver state mutex. This can result in a soft lockup, and a panic with softlockup_panic set. Terminate the skip loop on the ERROR sentinel so a blocked transition falls through to the existing return and reports -EINVAL. | ||||
| CVE-2026-64490 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: virtio: Validate control metadata from the device virtio-snd control handling trusts the device-provided control type and value count returned by the device. That metadata is then used directly to index g_v2a_type_map[] in virtsnd_kctl_info(), and to size loops and memcpy() operations in virtsnd_kctl_get() and virtsnd_kctl_put() against fixed-size virtio_snd_ctl_value and snd_ctl_elem_value arrays. A buggy or malicious device can therefore trigger out-of-bounds access by advertising an invalid control type or an oversized value count. Validate control type and count once in virtsnd_kctl_parse_cfg(), before querying enumerated items or exposing the control to ALSA. | ||||
| CVE-2026-64494 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: gp2ap002: fix runtime PM leak on read error gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the lux value, but if gp2ap002_get_lux() fails, it returns directly. This skips the pm_runtime_put_autosuspend() call at the "out" label, permanently leaking a runtime PM reference and preventing the device from autosuspending. Replace the direct return with a "goto out" to ensure the reference is properly dropped on the error path. | ||||
| CVE-2026-64514 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: userfaultfd: gate must_wait writability check on pte_present() userfaultfd_must_wait() and userfaultfd_huge_must_wait() read the PTE without taking the page table lock and then apply pte_write() / huge_pte_write() to it. Those accessors decode bits from the present encoding only; on a swap or migration entry they read the offset bits that happen to share the same position and return an undefined result. The intent of the check is "is this fault still WP-blocked?". A non-marker swap entry means the page is in transit -- the userfault context the original fault delivered against is no longer the same, and the swap-in or migration completion path will re-deliver a fresh fault if userspace still needs to handle it. Worst case under the current code the garbage write bit says "wait", and the thread stays asleep until a UFFDIO_WAKE that may never arrive. Gate the writability check on pte_present() so the lockless re-check only inspects present-PTE bits when the entry is actually present. The non-present, non-marker case returns "don't wait" and lets the fault path retry. | ||||
| CVE-2026-64537 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bridge: cfm: reject invalid CCM interval at configuration time ccm_tx_work_expired() re-arms itself via queue_delayed_work() using the configured exp_interval converted by interval_to_us(). When exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range, interval_to_us() returns 0, causing the worker to fire immediately in a tight loop that allocates skbs until OOM. Fix this by validating exp_interval at configuration time: - Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range [BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the netlink policy so userspace cannot set an invalid value. - Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has not yet been configured (defaults to 0 from kzalloc). | ||||
| CVE-2026-64546 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/edid: fix OOB read in drm_parse_tiled_block() drm_parse_tiled_block() casts the DisplayID block to a struct displayid_tiled_block and reads the full fixed layout up to tile->topology_id[7] without checking block->num_bytes. The DisplayID iterator only validates the declared payload length, so a crafted EDID can advertise a tiled-display block (tag DATA_BLOCK_TILED_DISPLAY, or DATA_BLOCK_2_TILED_DISPLAY_TOPOLOGY for v2.0) with a small num_bytes at the end of a DisplayID extension. The read then runs past the end of the exact-sized kmemdup()'d EDID allocation, a heap out-of-bounds read. Reject blocks shorter than the spec's 22-byte tiled payload before reading the fixed struct, as drm_parse_vesa_mso_data() already does. BUG: KASAN: slab-out-of-bounds in drm_edid_connector_update Read of size 2 at addr ffff888010077700 by task exploit/147 dump_stack_lvl (lib/dump_stack.c:94 ...) print_report (mm/kasan/report.c:378 ...) kasan_report (mm/kasan/report.c:595) drm_edid_connector_update (drivers/gpu/drm/drm_edid.c:7581) bochs_connector_helper_get_modes (drivers/gpu/drm/tiny/bochs.c:574) drm_helper_probe_single_connector_modes (drivers/gpu/drm/drm_probe_helper.c:426) status_store (drivers/gpu/drm/drm_sysfs.c:219) ... vfs_write (fs/read_write.c:595 fs/read_write.c:688) ksys_write (fs/read_write.c:740) | ||||
| CVE-2026-64549 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup() bpa10x_setup() sends the vendor command 0xfc0e and passes the response to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at skb->data + 1, without checking the length: bt_dev_info(hdev, "%s", (char *)(skb->data + 1)); hci_set_fw_info(hdev, "%s", skb->data + 1); A device that returns a one-byte response (status only) leaves skb->data + 1 past the end of the data, and the %s walk reads adjacent slab memory until it meets a NUL. The same happens when the payload is not NUL-terminated within skb->len. The out-of-bounds bytes end up in the kernel log and the firmware-info debugfs file. Print the revision string with a bounded "%.*s" limited to skb->len - 1 instead. This keeps the string readable for well-behaved devices while never reading past the received data, and does not fail setup, so a device returning a short or unterminated response keeps working. | ||||
| CVE-2026-64555 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Fix SPSR_EL2 restore in kvm_hyp_handle_mops() kvm_hyp_handle_mops() resets the single-step state machine as part of rewinding state for a MOPS exception by modifying vcpu_cpsr() and writing the result directly into hardware. In the case of nested virtualization, vcpu_cpsr() is a synthetic value such that the rest of KVM can deal with vEL2 cleanly. That means the value requires translation before being written into hardware, which is unfortunately missing from the MOPS handler. Fix it by directly modifying SPSR_EL2 and avoiding the synthetic state altogether, which will be resynchronized on the next 'full' exit back to KVM. | ||||
| CVE-2025-37790 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-08-04 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: mctp: Set SOCK_RCU_FREE Bind lookup runs under RCU, so ensure that a socket doesn't go away in the middle of a lookup. | ||||
| CVE-2025-37785 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix OOB read when checking dotdot dir Mounting a corrupted filesystem with directory which contains '.' dir entry with rec_len == block size results in out-of-bounds read (later on, when the corrupted directory is removed). ext4_empty_dir() assumes every ext4 directory contains at least '.' and '..' as directory entries in the first data block. It first loads the '.' dir entry, performs sanity checks by calling ext4_check_dir_entry() and then uses its rec_len member to compute the location of '..' dir entry (in ext4_next_entry). It assumes the '..' dir entry fits into the same data block. If the rec_len of '.' is precisely one block (4KB), it slips through the sanity checks (it is considered the last directory entry in the data block) and leaves "struct ext4_dir_entry_2 *de" point exactly past the memory slot allocated to the data block. The following call to ext4_check_dir_entry() on new value of de then dereferences this pointer which results in out-of-bounds mem access. Fix this by extending __ext4_check_dir_entry() to check for '.' dir entries that reach the end of data block. Make sure to ignore the phony dir entries for checksum (by checking name_len for non-zero). Note: This is reported by KASAN as use-after-free in case another structure was recently freed from the slot past the bound, but it is really an OOB read. This issue was found by syzkaller tool. Call Trace: [ 38.594108] BUG: KASAN: slab-use-after-free in __ext4_check_dir_entry+0x67e/0x710 [ 38.594649] Read of size 2 at addr ffff88802b41a004 by task syz-executor/5375 [ 38.595158] [ 38.595288] CPU: 0 UID: 0 PID: 5375 Comm: syz-executor Not tainted 6.14.0-rc7 #1 [ 38.595298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 38.595304] Call Trace: [ 38.595308] <TASK> [ 38.595311] dump_stack_lvl+0xa7/0xd0 [ 38.595325] print_address_description.constprop.0+0x2c/0x3f0 [ 38.595339] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595349] print_report+0xaa/0x250 [ 38.595359] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595368] ? kasan_addr_to_slab+0x9/0x90 [ 38.595378] kasan_report+0xab/0xe0 [ 38.595389] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595400] __ext4_check_dir_entry+0x67e/0x710 [ 38.595410] ext4_empty_dir+0x465/0x990 [ 38.595421] ? __pfx_ext4_empty_dir+0x10/0x10 [ 38.595432] ext4_rmdir.part.0+0x29a/0xd10 [ 38.595441] ? __dquot_initialize+0x2a7/0xbf0 [ 38.595455] ? __pfx_ext4_rmdir.part.0+0x10/0x10 [ 38.595464] ? __pfx___dquot_initialize+0x10/0x10 [ 38.595478] ? down_write+0xdb/0x140 [ 38.595487] ? __pfx_down_write+0x10/0x10 [ 38.595497] ext4_rmdir+0xee/0x140 [ 38.595506] vfs_rmdir+0x209/0x670 [ 38.595517] ? lookup_one_qstr_excl+0x3b/0x190 [ 38.595529] do_rmdir+0x363/0x3c0 [ 38.595537] ? __pfx_do_rmdir+0x10/0x10 [ 38.595544] ? strncpy_from_user+0x1ff/0x2e0 [ 38.595561] __x64_sys_unlinkat+0xf0/0x130 [ 38.595570] do_syscall_64+0x5b/0x180 [ 38.595583] entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||