Export limit exceeded: 22250 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 378140 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378140 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72333 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix tx ident leak for commands without a response Commit 6c3ea155e5ee ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident") changed ident allocation to use an IDA, releasing idents in l2cap_put_ident() when the matching response command is received. But identifiers allocated for commands that have no response defined are never released. In particular L2CAP_LE_CREDITS is sent repeatedly for the lifetime of an LE CoC channel, so a peer streaming data to the host exhausts the 1-255 ident range after 254 credit packets. From then on l2cap_get_ident() fails: kernel: Bluetooth: Unable to allocate ident: -28 and every subsequent L2CAP_LE_CREDITS packet is sent with ident 0, which is invalid (Core Spec, Vol 3, Part A, Section 4: "Signaling identifier 0x00 is an invalid identifier and shall never be used in any command"). Remote stacks that validate the ident drop these commands, never receive new credits, and the channel stalls permanently. With default socket buffers this happens after roughly 0.5 MB of received data (the exact amount depends on the socket receive buffer): < ACL Data TX: Handle 2048 flags 0x00 dlen 12 LE L2CAP: LE Flow Control Credit (0x16) ident 0 len 4 Source CID: 64 Credits: 1 Release the ident immediately after sending L2CAP_LE_CREDITS since no response will ever release it. Use a local variable instead of chan->ident so that an ident that an EXT_FLOWCTL channel may be waiting on (e.g. a pending reconfigure) is not overwritten by a credit packet. Also add the missing L2CAP_LE_CONN_RSP case to l2cap_put_ident() so idents allocated for outgoing L2CAP_LE_CONN_REQ commands are released when the response arrives. | ||||
| CVE-2026-72332 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Prevent PM resume deadlock in hwctx_sync_debug_bo() amdxdna_hwctx_sync_debug_bo() invokes the hardware hwctx_sync_debug_bo() callback while holding xdna->dev_lock. The callback may call amdxdna_cmd_submit(), which in turn calls amdxdna_pm_resume_get(). If the device is suspended, amdxdna_pm_resume_get() may synchronously execute amdxdna_pm_resume(), which also acquires xdna->dev_lock, resulting in a deadlock. Avoid the deadlock by calling amdxdna_pm_resume_get() before holding xdna->dev_lock in both amdxdna_hwctx_sync_debug_bo() and amdxdna_drm_config_hwctx_ioctl() | ||||
| CVE-2026-72331 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix VMA access race aie2_populate_range() and amdxdna_umap_release() access a saved VMA pointer that may have already been freed, leading to a potential use-after-free. Remove the VMA accesses from these functions to avoid the race. | ||||
| CVE-2026-72330 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/tls: Consume empty data records in tls_sw_read_sock() A peer may send a zero-length TLS application_data record; TLS 1.3 explicitly permits these as a traffic-analysis countermeasure (RFC 8446, Section 5.1). After decryption such a record has full_len == 0. tls_sw_read_sock() hands it to the read_actor, which has no payload to consume and returns zero. The loop treats a zero return as backpressure (used <= 0), requeues the skb at the head of rx_list, and stops. rx_list is serviced head-first on the next call, so the empty record is dequeued, fails the same way, and is requeued again; every later record on the connection is blocked behind it. tls_sw_recvmsg() does not stall on this: a zero-length data record copies nothing and falls through to consume_skb(). Mirror that in the read_sock() path by recognizing an empty data record before the actor runs, consuming it, and continuing. | ||||
| CVE-2026-72329 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/liquidio: drop cached VF pci_dev LUT The PF SR-IOV enable path caches VF pci_dev pointers in dpiring_to_vfpcidev_lut[] by iterating with pci_get_device(). Those entries do not own a reference, because the iterator drops the previous device reference on each step. The cached pointer is then dereferenced later when handling OCTEON_VF_FLR_REQUEST. Replace the cached VF mapping with runtime lookup on the mailbox DPI ring: derive the VF index from q_no, resolve the VF via exported PCI IOV helpers, validate it with the PF pointer and VF ID, then issue pcie_flr() and drop the reference with pci_dev_put(). Remove the unused VF lookup table initialization and cleanup. | ||||
| CVE-2026-72328 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix potential amdxdna_umap lifetime race amdxdna_umap_release() calls the blocking mmu_interval_notifier_remove() before removing the object from abo->mem.umap_list. If aie2_populate_range() runs concurrently, it may obtain a reference to an amdxdna_umap that is being released, leading to a potential use-after-free. Use kref_get_unless_zero() in aie2_populate_range() when acquiring a reference. If the reference count has already dropped to zero, release is in progress and the entry is skipped. | ||||
| CVE-2026-72327 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Reject invalid indirect BO handle in indirect CSD setup v3d_get_cpu_indirect_csd_params() looks up the indirect buffer object from a userspace-supplied handle but never checks the result. A bogus or stale handle makes drm_gem_object_lookup() return NULL, which is then stored in info->indirect and only dereferenced later when the indirect CSD job runs, turning a userspace mistake into a NULL pointer dereference in the kernel. Bail out with -ENOENT as soon as the lookup fails, so the bad handle is rejected at submission time. | ||||
| CVE-2026-72326 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cake: reject overhead values that underflow length CAKE accepts signed overhead values and stores them in an s16, but the adjusted packet length calculation uses unsigned arithmetic. A negative effective length can therefore wrap to a large value. Such configurations make rate accounting depend on integer wraparound rather than on the packet size userspace intended to model. A static netlink lower bound is not enough because packets reaching CAKE can be smaller than any reasonable manual-overhead allowance. Fold the signed overhead adjustment into the existing datapath MPU clamp so negative adjusted lengths are clamped before link-layer framing adjustments. | ||||
| CVE-2026-72325 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/core: Avoid enabling BRS from the SVM reload path Branch Sampling (BRS) and Last Branch Record (LBR) are mutually exclusive hardware features, and users of both are tracked via cpuc->lbr_users. When SVM is toggled on a CPU, the host perf events are reprogrammed to update the HostOnly filter bit (set when virtualization is enabled, cleared when it is disabled). On PerfMonV2-capable processors, this reprogramming is performed by calling amd_pmu_enable_all() to rewrite the event selectors. However, amd_pmu_enable_all() also calls amd_brs_enable_all(), which enables BRS whenever cpuc->lbr_users > 0. Having active LBR events satisfies this gating on processors that have LBR but not BRS. The kernel then tries to set the BRS enable bit in DebugExtnCfg (MSR 0xc000010f). Since that bit is deprecated on such hardware, the write results in a #GP: Call Trace: <IRQ> amd_pmu_enable_all+0x1d/0x90 amd_pmu_disable_virt+0x62/0xb0 kvm_arch_disable_virtualization_cpu+0xa/0x40 [kvm] hardware_disable_nolock+0x1a/0x30 [kvm] __flush_smp_call_function_queue+0x9b/0x410 __sysvec_call_function+0x18/0xc0 sysvec_call_function+0x69/0x90 </IRQ> <TASK> asm_sysvec_call_function+0x16/0x20 RIP: 0010:cpuidle_enter_state+0xc4/0x450 ? cpuidle_enter_state+0xb7/0x450 cpuidle_enter+0x29/0x40 cpuidle_idle_call+0xf5/0x160 do_idle+0x7b/0xe0 cpu_startup_entry+0x26/0x30 start_secondary+0x115/0x140 secondary_startup_64_no_verify+0x194/0x19b </TASK> Fix this by ensuring that BRS is not enabled from the event selector reprogramming path even when cpuc->lbr_users > 0. | ||||
| CVE-2026-72324 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: mvebu: free generic chips on unbind irq_alloc_domain_generic_chips() allocates generic chip data that must be freed via irq_domain_remove_generic_chips(). The devres action mvebu_gpio_remove_irq_domain() only called irq_domain_remove(), which only frees the generic chips if IRQ_DOMAIN_FLAG_DESTROY_GC is set. Call irq_domain_remove_generic_chips() explicitly before irq_domain_remove() instead. | ||||
| CVE-2026-72323 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: igmp: Fix potential UAF in igmp_gq_start_timer() A race condition exists between device teardown (inetdev_destroy) and incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free in the IGMP timer callback. During device destruction, inetdev_destroy() drops the primary reference to in_device, which can drop its refcount to 0. The actual freeing of in_device memory is deferred via RCU (using call_rcu()). Concurrently, igmp_rcv() runs under RCU read lock and obtains the in_device pointer. Because the memory is RCU-protected, CPU-0 can safely dereference in_device even if its refcount has hit 0. However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it attempts to acquire a reference using in_dev_hold(). This increments the refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning. Since the in_device memory is still scheduled to be freed after the RCU grace period (as the free callback does not check the refcount again), the device is freed while the timer is still armed. When the timer expires, it accesses the freed memory, causing a kernel panic. Fix this by using refcount_inc_not_zero() (via a new helper in_dev_hold_safe()) to prevent acquiring a reference if the device is already being destroyed. If the refcount is 0, we do not arm the timer. A similar issue in IPv6 MLD is fixed in a subsequent patch. | ||||
| CVE-2026-72322 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: Fix potential UAF in MLD delayed work A race condition exists between device teardown and incoming MLD query processing, leading to a Use-After-Free in the MLD delayed work. During device destruction, the primary reference to inet6_dev is dropped, which can drop its refcount to 0. The actual freeing of inet6_dev memory is deferred via RCU. Concurrently, the packet receive path runs under RCU read lock and obtains the inet6_dev pointer. Because the memory is RCU-protected, CPU-0 can safely dereference inet6_dev even if its refcount has hit 0. However, if CPU-0 calls igmp6_event_query() and schedules delayed work, it attempts to acquire a reference using in6_dev_hold(). This increments the refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning. Since the inet6_dev memory is still scheduled to be freed after the RCU grace period, the device is freed while the work is still scheduled. When the work runs, it accesses the freed memory, causing a kernel panic. Fix this by using refcount_inc_not_zero() (via a new helper in6_dev_hold_safe()) to prevent acquiring a reference if the device is already being destroyed. If the refcount is 0, we do not schedule the work. | ||||
| CVE-2026-72321 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: igmp: Fix potential memory leaks in igmp_mod_timer() and igmp_stop_timer() When a timer is deleted and not re-armed in igmp_mod_timer(), or stopped in igmp_stop_timer(), the code currently decrements the reference counter of the multicast list entry @im using refcount_dec(&im->refcnt). However, both functions can be called from the RCU reader path: - igmp_mod_timer() via igmp_heard_query() -> for_each_pmc_rcu() - igmp_stop_timer() via igmp_rcv() -> igmp_heard_report() If the group im was concurrently removed from the list by ip_mc_dec_group(), its reference count might have already been decremented to 1. In this case, timer_delete() succeeds, and refcount_dec() decrements the refcount from 1 to 0. Since refcount_dec() does not free the object when it hits 0 (unlike ip_ma_put()), the im structure is leaked. Fix this by using ip_ma_put(im) instead of refcount_dec(&im->refcnt), and deferring the put until after the spinlock is released. | ||||
| CVE-2026-72320 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_lookup: fix catchall element handling with inverted lookups nft_lookup_eval() decides whether a lookup matched (`found`) from the direct set lookup and priv->invert before falling back to the catchall element used by interval sets (e.g. nft_set_rbtree) for the open-ended default range. Since `found` is never recomputed after `ext` is replaced by the catchall lookup, inverted lookups (NFT_LOOKUP_F_INV, "!= @set") can wrongly match or wrongly skip the catchall element, producing the wrong verdict. Fold the catchall lookup into `ext` before computing `found`, matching the order already used by nft_objref_map_eval(). | ||||
| CVE-2026-72319 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: ensure inner headers in ICMP errors are in headroom Sashiko points out that after stripping the outer headers with pskb_pull() we should ensure the inner IP headers in ICMP errors from tunnels are present in the skb headroom for functions like ipv4_update_pmtu(), icmp_send() and IP_VS_DBG(). Also, add more checks for the length of the inner headers. | ||||
| CVE-2026-72318 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cifs: validate DFS referral string offsets parse_dfs_referrals() validates that the response header and referral array fit in the received buffer, but each referral also contains string offsets supplied by the server. Those offsets are used to compute the DfsPath and NetworkAddress string pointers without checking whether they still point inside the response buffer. A malformed referral can therefore make the computed pointer exceed the end of the buffer. The resulting negative max_len is then passed to cifs_strndup_from_utf16(), and the non-Unicode path forwards it to kstrndup() as a size_t, allowing strnlen() to read out of bounds. Validate each string offset before deriving the string pointer. | ||||
| CVE-2026-72317 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: pin upper rpc_clnt across the TLS connect_worker The TLS connect path has a use-after-free: nothing pins the upper rpc_clnt across the delayed connect_worker. xs_connect() stores task->tk_client in sock_xprt::clnt as a raw pointer and queues the worker; for TLS-secured transports that worker is xs_tcp_tls_setup_socket(), which reads several fields out of the saved pointer (cl_timeout, cl_program, cl_prog, cl_vers, cl_cred, cl_stats) to construct the args for the inner handshake rpc_clnt. The xprt does not reference the rpc_clnt; the rpc_clnt references the xprt. xs_destroy() does cancel the connect_worker, but it runs only when the xprt's refcount drops to zero, which cannot happen until the rpc_clnt releases its cl_xprt reference in rpc_free_client_work(). When a TLS handshake fails fatally (for example, an mTLS mount whose client cert does not match the server), the connecting task is woken with -EACCES and exits, the mount caller invokes rpc_shutdown_client(), and the upper rpc_clnt is freed before the queued connect_worker fires. xs_tcp_tls_setup_socket() then dereferences the freed clnt, producing the refcount_t underflow Michael Nemanov reported. Take a reference on the upper rpc_clnt in xs_connect() for TLS transports via a new rpc_hold_client() helper, and drop it in the connect_worker's exit path with rpc_release_client(). The xprt_lock_connect() / xprt_unlock_connect() pairing already serialises xs_connect() with xs_tcp_tls_setup_socket(), so the take and release are balanced one-for-one. The non-TLS connect worker (xs_tcp_setup_socket) never reads sock_xprt::clnt, so leave that path alone and avoid the clnt-holds-xprt-holds-clnt cycle that would otherwise prevent xprt destruction. | ||||
| CVE-2026-72316 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm era: fix NULL pointer dereference in metadata_open() metadata_open() returns NULL when kzalloc_obj() fails, but the caller era_ctr() only checks IS_ERR(md). Since IS_ERR(NULL) returns false, the NULL pointer is treated as a valid result and later assigned to era->md, leading to a NULL pointer dereference when the metadata is accessed. Fix this by returning ERR_PTR(-ENOMEM) on allocation failure, consistent with dm-cache-metadata.c, dm-thin-metadata.c, and dm-clone-metadata.c which all use ERR_PTR(-ENOMEM) for the same pattern. | ||||
| CVE-2026-72315 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix busy dentry warning on unmount after DIO Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed the issue in cifs where deferred close of a file led to a dentry reference count not being released in umount, by flushing deferredclose_wq in cifs_kill_sb() to solve it. However, the cifs DIO path suffers from the same busy-dentry problem caused by a delayed dentry reference-count release: [dio] [cifsd] [close + umount] netfs_unbuffered_write_iter_locked ... cifs_demultiplex_thread netfs_unbuffered_write cifs_issue_write netfs_wait_for_in_progress_stream [1] ... netfs_write_subrequest_terminated netfs_subreq_clear_in_progress netfs_wake_collector // wake [1] netfs_put_subrequest netfs_put_request queue_work(system_dfl_wq, xxx) [2] // dio write return cifs_close _cifsFileInfo_put // cfile->count 2->1 --cfile->count [3] // umount cifs_kill_sb kill_anon_super // warning triggered! shrink_dcache_for_umount [4] [system_dfl_wq] [5] netfs_free_request ... _cifsFileInfo_put // cfile->count 1->0 --cfile->count queue_work(fileinfo_put_wq, xxx) [fileinfo_put_wq] [6] cifsFileInfo_put_work cifsFileInfo_put_final dput If the umount path is triggered before [5], it results warning: BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1) [unmount of cifs cifs] The existing per-inode ictx->io_count wait in cifs_evict_inode() does not help: it lives in the inode eviction path, which runs after shrink_dcache_for_umount() has already warned about the busy dentries. Fix it by adding a per-superblock outstanding-rreq counter that is incremented in cifs_init_request() and decremented in cifs_free_request(). In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach 0 - which guarantees that all cleanup_work for this sb have run and thus all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq. Then drain the workqueue so the dentry refs are dropped. This is a targeted wait, not a flush of the system-wide system_dfl_wq. | ||||
| CVE-2026-72314 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: regulator_lock_two() should test for EDEADLK not EDEADLOCK Compare against -EDEADLK, which is what ww_mutex_lock() actually returns and what every other deadlock check in this file already uses. Function regulator_lock_two() acquires two regulators via regulator_lock_nested() -> ww_mutex_lock(). On contention, ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop the lock it holds and retry the acquisition in the canonical order. However, regulator_lock_two() tests the return value against -EDEADLOCK rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are the same value, so the comparison happens to be correct and the bug is invisible. But on MIPS, SPARC, and PowerPC, those two errors have different values. The test is wrong: a genuine -EDEADLK backoff no longer matches -EDEADLOCK, so instead of unlocking and retrying, the code falls into WARN_ON(ret) and returns with only one of the two regulators locked. In practice, this is a bug only on MIPS, because the regulator core is not built or used on the other two platforms. In general, EDEADLK is preferred over EDEADLOCK for new code. | ||||