| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A logic flaw in Java cache key handling object comparison handling could lead to improper identifier resolution when processing specific user account structures. The issue has been remediated by updating the internal comparison routines to ensure accurate object evaluation and prevent potential identity mismatch conditions. |
| Catalyst::Seal versions before 0.03 for Perl allow one request to disable a path or route a later one past an authorization check via a dispatch memo keyed on the request path alone.
Catalyst::Seal replaces the dispatcher's prepare_action with a version that memoises how a path resolved: which dispatch type matched, at which level, and what was left over as arguments. The key is the request path and nothing else. Action roles that match on the method, content type, scheme or query make that resolution depend on state the key does not carry, so the memo answers for a request it was not built from.
A path that resolves to no action is memoised as well, and replaying that entry returns without consulting any dispatch type, so no action is set and the request fails. A GET of a path whose action is declared POST-only therefore disables that path for every later request, the correct POST included. An entry that did resolve replays the level the earlier descent reached. Where a POST-only action sits below a shallower action on the same path, a GET memoises the shallow route, and a later POST is dispatched there with an auto() guarding the deeper controller never running.
The memo is cleared only when an action is registered, which happens at setup, so an entry lasts for the life of the process, and its cap of 2048 entries bounds how many paths one caller can disable. In the configuration measured, the misroute lands on the less privileged action, so it is an authorization check not running rather than a privilege gain. |
| Reliance on IP Address for Authentication vulnerability in Erlang/OTP ssl (inet_tls_dist module) allows unauthenticated bypass of the distribution-over-TLS LAN allowlist.
The inet_tls_dist:check_ip/1 function, which enforces a LAN allowlist for Erlang distribution over TLS, calls inet:sockname/1 instead of inet:peername/1 to obtain the peer's IP address. Because inet:sockname/1 returns the local socket address, both the local IP and the supposed peer IP resolve to the same value, causing the subnet mask comparison to always succeed regardless of the actual remote address. Any holder of a CA-signed TLS certificate can therefore bypass the LAN restriction and gain full Erlang distribution access to the node, including rpc:call/4 and code:load_binary/3.
This vulnerability is associated with program file lib/ssl/src/inet_tls_dist.erl.
This issue affects OTP from OTP 26.0 before OTP 27.3.4.13, OTP 28.5.0.2, and OTP 29.0.2, corresponding to ssl from 11.0 before 11.2.12.9, 11.6.0.2, and 11.7.2. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Improper Restriction of Rendered UI Layers or Frames vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges and Session theft. |
| Missing release of resource after effective lifetime, Comparison using wrong factors vulnerability in Apache Tomcat allows a denial of service as a result of lost time outs for asynchronous WebSocket writes.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.25, from 10.1.0-M1 through 10.1.59, from 9.0.0.M1 through 9.0.121.
The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.43 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.26, 10.1.60 or 9.0.122, which fix the issue. |
| In OpenStack Blazar before 17.0.1, the V2 lease API does not enforce object-level authorization on its update and delete operations (PUT /v2/leases/{lease_id} and DELETE /v2/leases/{lease_id}). The policy authorize() wrapper attempts to load the target lease to build the authorization target from its owner, but it looks up the lease under the keyword "lease_id" whereas the controller methods name the parameter "id" (and the wsme_pecan.wsexpose wrapper delivers it positionally). The lookup returns None, and thus authorization falls back to the requesting user's own project_id/user_id instead of the target lease owner. Any authenticated user who knows a lease ID can therefore modify or delete leases belonging to other users and projects, bypassing the intended ownership check. |
| A improper restriction of rendered ui layers or frames vulnerability in Fortinet FortiPAM Chrome Extension 8.0 all versions, FortiPAM Chrome Extension 7.4 all versions may allow attacker to information disclosure via remote unauthenticated attack |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix clock domain mismatch in clients_still_reclaiming()
clients_still_reclaiming() computes a deadline from nn->boot_time
(CLOCK_REALTIME, ~1.7 billion) but compares it against
ktime_get_boottime_seconds() (CLOCK_BOOTTIME, seconds since boot).
The comparison is always false — it would take ~54 years of uptime
for BOOTTIME to exceed the REALTIME-derived deadline.
This means any client can hold the server in grace indefinitely by
sending CLAIM_PREVIOUS OPEN requests, blocking all non-reclaim
operations for all other clients.
Add boot_time_bt (CLOCK_BOOTTIME) alongside the existing boot_time
and use it for the deadline computation. boot_time (CLOCK_REALTIME)
is preserved for its cl_boot clientid-nonce role. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use memcmp() to compare ClientGUIDs
ClientGUID is a fixed-size binary value and can contain embedded NUL
bytes. strncmp() stops comparing at the first NUL byte, so different
ClientGUID values can incorrectly be treated as equal.
Use memcmp() in SMB3 multichannel session binding and
FSCTL_VALIDATE_NEGOTIATE_INFO to compare all SMB2_CLIENT_GUID_SIZE
bytes. |
| This issue was addressed with improved state management. This issue is fixed in macOS Golden Gate 27. A malicious app may be able to bypass clickjacking protections for secure prompts. |
| A memory corruption issue was addressed with improved input validation. This issue is fixed in iOS 27 and iPadOS 27, macOS Golden Gate 27. Processing a maliciously crafted file may lead to unexpected app termination. |
| A flaw has been found in OpenClaw ClawScan up to 0.1.6. This affects an unknown function of the file internal/runner/static_scanner.go of the component Static Scanner. This manipulation causes incomplete comparison with missing factors. It is possible to launch the attack on the local host. The exploit has been published and may be used. Upgrading to version 0.1.7 mitigates this issue. Patch name: 9f6a6fbb9f1137345566d0ab44c73893dfe112fa. The affected component should be upgraded. |
| Open WebUI is an extensible, feature-rich, and user-friendly self-hosted AI platform. From 0.9.0 until 0.11.0, the terminal file-preview serveUrl iframe branch always granted allow-same-origin together with allow-scripts for HTML files served from the application origin. Any authenticated user with access to a configured terminal server could cause script in a previewed file to run in the Open WebUI origin, read the victim's session token from localStorage, and take over the account, with possible server-side code execution if the victim was an admin or held workspace.functions. This issue is fixed in 0.11.0. |
| Missing authorization in Browser in Google Chrome prior to 153.0.8010.47 allowed a remote attacker who had compromised the renderer process to spoof UI elements via a crafted HTML page. (Chromium security severity: Medium) |
| Initializing the DNS stub resolver from an /etc/resolv.conf file, or a LOCALDOMAIN environment variable, whose search list contains a domain of roughly 200 characters or more in the GNU C Library version 2.26 to 2.44 results in an assertion failure which aborts the process.
The resolver truncates the search list when copying it into the fixed-size _res.defdname buffer, then asserts that the copy is consistent with the full configuration. The consistency check compared against the wrong size and did not handle a first entry that does not fit, so a correctly truncated list failed the assertion. Any process that resolves names through the library is affected, including long-running processes that reload /etc/resolv.conf on the next query after it changes. Search domains are commonly written to /etc/resolv.conf from data received over DHCP or from a VPN server, so an attacker on the local network may be able to trigger this without privileges on the target system, subject to validation by the network configuration software. |
| Missing authorization in Transactions Platform in Google Chrome prior to 153.0.8010.47 allowed a remote attacker who had compromised the renderer process to spoof UI elements via a crafted HTML page. (Chromium security severity: Medium) |
| In Eclipse Ankaios versions 0.6.0 to before 1.0.4, `LogRule::matches` in the agent control-interface authorizer stops at the first wildcard pattern in a single rule instead of evaluating later entries, which can cause deny `LogRule` entries to be skipped and allow unauthorized access to another workload's logs. |
| vm2 before 3.11.7 contains a module allowlist bypass vulnerability in isPathAllowedForModule that uses raw string prefix matching instead of boundary-anchored comparison. Attackers can reach non-allowlisted packages sharing a prefix with allowlisted modules by performing relative requires from allowlisted packages when transitive loading is disabled. |
| UI misrepresentation in FullScreen in Google Chrome prior to 152.0.7977.75 allowed a remote attacker to spoof address bar via a crafted HTML page. (Chromium security severity: Low) |
| Open WebUI is an extensible, feature-rich, and user-friendly self-hosted AI platform. From 0.8.11 until 0.11.1, src/lib/components/chat/FileNav/PortPreview.svelte rendered terminal port content in an iframe sandbox containing both allow-scripts and allow-same-origin. Because the terminal proxy serves that content from the Open WebUI origin, an authenticated user with access to a shared terminal server could host script on a previewed port and take over a victim's account when the victim opened the preview. This issue is fixed in version 0.11.1. |
