| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: make huge_ptep_get handled unaligned addresses
huge_ptep_get() can be handed a virtual address pointing to the middle
of a contpmd/contpte mapped hugetlb folio (examples of callers are
pagemap_hugetlb_range, page_mapped_in_vma).
The arm64 helper rewalks the pgtables in find_num_contig to answer
whether the huge pte we have maps a contpmd or a contpte hugetlb folio,
and returns CONT_PMDS or CONT_PTES, so that it can collect a/d bits over
the contiguous ptes. We can falsely return CONT_PTES instead of
CONT_PMDS if the addr is not aligned. On systems where CONT_PTES !=
CONT_PMDS (meaning page size is 16K), we could collect excess A/D bit
state, meaning extra work for the kernel. Even worse, we may iterate
beyond the PTE table and dereference a garbage ptep pointer to access
physical memory we don't own. Since the ptep pointer is a linear map
address, we may run off the end of the linear map or into a hole,
dereference a VA not mapped into the kernel pgtables and cause kernel
panic.
Fix this by aligning the pmdp pointer down to a contpmd base before
checking equality with the passed huge pte pointer, to correctly answer
whether the huge pte is the base of a contpmd block. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: bound EDID block reads to the response buffer
virtio_get_edid_block() validates the read offset only against the
device-supplied resp->size field, never against the fixed-size resp->edid
array. The EDID block index is driven by the device-supplied extension
count, so a malicious virtio-gpu backend can advertise a large size
together with a high block count and read far past the array into adjacent
kernel memory, which is then surfaced in the parsed EDID (an out-of-bounds
read / info leak).
Also reject any read whose end exceeds the size of the edid array.
Conforming EDID responses stay within the array and are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix 32-bit overflow in CWSR total size calculation
total_cwsr_size was computed in 32-bit before being used as a BO/SVM
allocation size.
With large ctx_save_restore_area_size and debug_memory_size
multiplied by the XCC count, the product can wrap,
yielding an undersized CWSR save area that firmware later overruns.
Promote total_cwsr_size to u64 and use check_add_overflow()/
check_mul_overflow() in both kfd_queue_acquire_buffers() and
kfd_queue_release_buffers().
(cherry picked from commit 319f7e13423ae3f486b9aea82f9ad2d6af0ee608) |
| A vulnerability has been found in MZ Automation libiec61850 up to 1.6.1. The affected element is the function MmsMapping_varAccessSpecToObjectReference of the file src/iec61850/common/iec61850_common.c of the component MMS Protocol Workflow. Such manipulation of the argument GetNamedVariableListAttributesResponse.itemId leads to heap-based buffer overflow. The attack must be carried out locally. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
exec: fix unsigned loop counter wrap in transfer_args_to_stack()
The stop value is derived from bprm->p >> PAGE_SHIFT. The index variable
is an unsigned long. If bprm->p drops below PAGE_SIZE and stop becomes
zero the loop condition index >= stop is always true.
After the index == 0 iteration the decrement wraps to ULONG_MAX and
bprm->page[ULONG_MAX] reads sizeof(void *) bytes in front of the array.
The pointer has wrapped to -1. That garbage pointer is then passed to
kmap_local_page() and PAGE_SIZE bytes are copied from wherever that
lands into the stack of the process being created. And the loop doesn't
terminate either...
Getting there only requires bprm->p < PAGE_SIZE. On !MMU
bprm_set_stack_limit() and bprm_hit_stack_limit() are empty. So the only
constraint on how far bprm->p is pushed down is valid_arg_len(), i.e.
that each individual string still fits in what is left.
bprm->p starts at PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *) so a
single argument or environment string of a little over 31 pages leaves
it in the first page:
Oops - load access fault [#1]
CPU: 0 UID: 0 PID: 1 Comm: victim Not tainted 7.2.0-rc4 #1
epc : __memcpy+0xd4/0xf8
ra : transfer_args_to_stack+0xaa/0xae
s4 : ffffffffffffffff s2 : 0000000000000000
a1 : ffffffdc98000000 a2 : 0000000000001000
status: 0000000a00001880 badaddr: ffffffdc98000000 cause: 0000000000000005
[<801a5324>] __memcpy+0xd4/0xf8
[<800d5f6a>] load_flat_binary+0x43a/0x65e
[<800a2de4>] bprm_execve+0x1d4/0x316
[<800a351a>] do_execveat_common+0x12e/0x138
[<800a3d44>] __riscv_sys_execve+0x38/0x4e
Kernel panic - not syncing: Fatal exception in interrupt
This is an arcane bug but we should still fix it.
Count down from MAX_ARG_PAGES so the loop ends when index reaches stop,
stop == 0 included. The iterations performed are unchanged for every
other value of stop.
Only CONFIG_MMU=n builds are affected, transfer_args_to_stack() is used
by binfmt_flat and binfmt_elf_fdpic on nommu only.
The loop predates git history. commit 7e7ec6a93434
("elf_fdpic_transfer_args_to_stack(): make it generic") only moved it
from binfmt_elf_fdpic.c into fs/exec.c and narrowed the copy to the used
part of the first page. The condition and the decrement are unchanged
from 2.6.12-rc2. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: Fix session UAF in set_termios
rfcomm_tty_set_termios() tests dlc->session without rfcomm_mutex and
later passes the pointer to rfcomm_send_rpn(). The latter dereferences
both session->initiator and session->sock. Meanwhile, krfcommd can
unlink the DLC and free the session while holding rfcomm_mutex.
The race can proceed as follows:
TTY ioctl task krfcommd
-------------- --------
load dlc->session
enter rfcomm_send_rpn()
lock rfcomm_mutex
clear dlc->session
free session
unlock rfcomm_mutex
read session->initiator
KASAN reported:
BUG: KASAN: slab-use-after-free in rfcomm_send_rpn+0x297/0x2a0
Read of size 4 at addr ffff88810012a850 by task poc/92
Call Trace:
rfcomm_send_rpn+0x297/0x2a0
rfcomm_tty_set_termios+0x50d/0x850
tty_set_termios+0x596/0x950
set_termios+0x46a/0x6e0
tty_mode_ioctl+0x152/0xbd0
tty_ioctl+0x915/0x1240
__x64_sys_ioctl+0x134/0x1c0
Allocated by task 92:
rfcomm_session_add+0x9e/0x2e0
rfcomm_dlc_open+0x8b1/0xe00
rfcomm_dev_activate+0x85/0x1a0
rfcomm_tty_open+0x90/0x280
Freed by task 68:
kfree+0x131/0x3c0
rfcomm_session_del+0x119/0x180
rfcomm_run+0x737/0x4710
Add rfcomm_dlc_send_rpn(), which holds rfcomm_mutex while it verifies
that the DLC is still attached and sends the RPN frame. Have the TTY
path use the helper and drop its unlocked session check. This keeps the
session valid through both the frame construction and socket send. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB reads in rtw_get_wps_ie()
rtw_get_wps_ie() iterates over IE data from network frames without
validating that the IE header and payload fit within the remaining
buffer before reading them. Specifically:
- in_ie[cnt + 1] is read without checking cnt + 1 < in_len
- memcmp(&in_ie[cnt + 2], ...) accesses cnt + 2 without bounds check
- in_ie[cnt + 1] is used as length without verifying payload fits
Add bounds checks at the top of the loop body to break early if fewer
than 2 bytes remain for the IE header, or if the declared payload
extends past the end of the buffer. Also require at least 4 bytes of
payload before comparing the WPS OUI. |
| In the Linux kernel, the following vulnerability has been resolved:
net: slip: serialize receive against buffer reallocation
sl_realloc_bufs() replaces rbuff and updates buffsize while holding
sl->lock. slip_receive_buf() reads those fields and writes through rbuff
without holding the lock.
An MTU change can therefore race with receive processing. An MTU shrink
can expose the new smaller rbuff with the old larger bound, causing an
out-of-bounds write. A receive callback which already loaded the old
rbuff can instead continue writing after that buffer has been freed.
Serialize receive processing with sl_realloc_bufs() by holding sl->lock
while consuming each receive batch. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: reject zero bucket types in crush_decode
CRUSH bucket type 0 is reserved for devices. The mapper relies on
that invariant and uses type 0 to identify leaf devices.
If crush_decode() accepts a bucket with type 0, a malformed CRUSH map
can make the mapper treat a negative bucket ID as a device and pass it
to is_out(), which then indexes the OSD weight array with a negative
value.
Reject zero bucket types while decoding the CRUSH map so the invalid
state never reaches the mapper. |
| `scim-patch`, a library to perform SCIM patch, prior to version 0.9.1 performs prototype pollution when applying a SCIM PATCH operation whose `value` object contains a key like `"__proto__.someProp"`. After one such patch,
`Object.prototype.someProp` is set process-wide, affecting every plain object in the Node process. Any service that calls `scimPatch()` on attacker-controlled JSON (i.e. any SCIM endpoint accepting `PATCH` from an external IdP) is exploitable on a stock Node runtime. Version 0.9.1 contains a patch. A workaround is available. Calling `Object.freeze(Object.prototype)` (and the same on `Array.prototype`, `Function.prototype`) at process startup neutralizes this class of bug — assignment to a frozen prototype becomes a silent no-op in sloppy mode or a `TypeError` in strict mode. Node's `--frozen-intrinsics` flag does this for built-ins automatically. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vce: fix integer overflow in image size
Fix a security vulnerability where malicious VCE command streams
with oversized dimensions (e.g. 65536×65536) cause 32-bit integer
overflow, wrapping the calculated buffer size to 0. This bypasses
validation and allows GPU firmware to perform out-of-bound memory
access.
The fix uses 64-bit arithmetic to detect overflow and rejects
invalid dimensions before they reach the hardware.
V2: remove redundant check
V3: modify max height value
V4: remove size64
(cherry picked from commit cbe408dba581755ad1279a487ec786d8927d778d) |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix pre-auth out-of-bounds read on snaptrace in ceph_handle_caps()
ceph_handle_caps() reads snap_trace_len from the wire-format
ceph_mds_caps header and uses it unconditionally to build a fake
end pointer (snaptrace + snaptrace_len) that is later handed to
ceph_update_snap_trace() in the CEPH_CAP_OP_IMPORT case:
snaptrace = h + 1;
snaptrace_len = le32_to_cpu(h->snap_trace_len);
p = snaptrace + snaptrace_len;
...
case CEPH_CAP_OP_IMPORT:
if (snaptrace_len) {
...
if (ceph_update_snap_trace(mdsc, snaptrace,
snaptrace + snaptrace_len,
false, &realm)) { ... }
ceph_update_snap_trace() then decodes a struct ceph_mds_snap_realm
from snaptrace using ceph_decode_need(&p, e, sizeof(*ri), bad)
with the attacker-supplied fake end e == snaptrace + snaptrace_len.
With snaptrace_len == 0xFFFFFFFF the bound check is trivially
satisfied, ri = p reads sizeof(struct ceph_mds_snap_realm) past
the legitimate msg->front buffer, and ri->num_snaps /
ri->num_prior_parent_snaps then drive further out-of-bounds
reads of the encoded snap arrays.
The eleven msg_version >= 2 .. msg_version >= 12 decoder blocks
above the op switch each catch this OOB through their
ceph_decode_*_safe() / ceph_decode_need() helpers, but they sit
behind a hdr.version-gated if, so a malicious or compromised
MDS that sets msg->hdr.version = 1 reaches the IMPORT path with
no version-gated decoder having validated snap_trace_len. The
shape has been present since ceph_handle_caps() was introduced.
Validate snap_trace_len against the message front buffer before
consuming it, using the canonical ceph_decode_need() / ceph_has_room()
helper. The helper bounds the length with subtraction (n <= end - p,
guarded by end >= p) rather than pointer addition, so it is wrap-safe
for the attacker-controlled u32 length on 32-bit builds where
p + snap_trace_len could overflow the address space. This matches the
rest of the ceph decode path (e.g. the pool_ns_len check a few lines
below), and the existing goto bad cleanup already covers this exit
path. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: fix GSO userspace truncation underflow
OVS_ACTION_ATTR_TRUNC currently stores a delta from the original skb
length in OVS_CB(skb)->cutlen. When a later userspace action segments a
GSO skb, queue_gso_packets() reuses that delta for each smaller segment.
A segment can then reach queue_userspace_packet() with cutlen greater
than skb->len, underflowing the length passed to skb_zerocopy().
Store the maximum preserved length instead and bound each consumer
against the current skb length. Use U32_MAX as the no-truncation
sentinel so the value remains valid if skb geometry changes before a
consumer handles it. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: bound DACL dedup walk to copied ACEs
set_ntacl_dacl() can stop copying ACEs before consuming the full input
DACL when size accounting overflows.
When that happens, num_aces reflects only the ACEs that were actually
copied into the output DACL, but set_posix_acl_entries_dacl() still
receives nt_num_aces and uses it to walk the existing ACE array during
dedup.
That makes the dedup walk scan past the copied ACE array and inspect
buffer tail that does not contain valid ACEs.
Split the two meanings currently carried by the NT ACE count. Pass the
number of copied NT ACEs to bound the dedup walk, and preserve the
original "input DACL had NT ACEs" state separately for the
Everyone/default ACL fallback.
This keeps the dedup walk aligned with the ACEs that are actually
present in the rebuilt DACL. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate num_subauth when copying ACE in set_ntacl_dacl
set_ntacl_dacl() copies each ACE from the attacker-controlled stored
security descriptor verbatim into the response DACL without checking
sid.num_subauth. The ACE bytes (including an unchecked num_subauth)
originate from an authenticated SMB2_SET_INFO(SecInfo=DACL) that is
stored raw via ksmbd_vfs_set_sd_xattr(); parse_dacl() rejects a bad ACE
with `break` rather than an error, so parse_sec_desc() still returns
success and the malformed SD reaches the xattr intact.
On a subsequent SMB2_QUERY_INFO(SecInfo=DACL) for an inode carrying a
POSIX access ACL, build_sec_desc() -> set_ntacl_dacl() ->
set_posix_acl_entries_dacl() walks the copied ACEs and reads
ntace->sid.sub_auth[ntace->sid.num_subauth - 1]
with num_subauth taken straight from the stored SD. Since sub_auth[]
is fixed at SID_MAX_SUB_AUTHORITIES (15), a crafted num_subauth (e.g.
255) drives an out-of-bounds heap read of ~1 KB with an offset fully
controlled by an authenticated client.
The sibling functions already gate this field:
parse_dacl() -- num_subauth == 0 || > SID_MAX_SUB_AUTHORITIES
parse_sid() -- num_subauth > SID_MAX_SUB_AUTHORITIES
smb_copy_sid() -- min_t(u8, num_subauth, SID_MAX_SUB_AUTHORITIES)
set_ntacl_dacl() is the lone inconsistent path that omits the check.
Add the same num_subauth validation in set_ntacl_dacl() before copying
the ACE, matching the gate already enforced by parse_dacl(). |
| An out-of-bounds read vulnerability in Redis through 8.8.1 allows an adjacent unauthenticated attacker to cause denial of service or information disclosure by sending a specially crafted PING message to the Redis Cluster Bus port. |
| A flaw was found in GIMP's PSD file format plugin. This vulnerability, an unsigned integer underflow in the `block_rem` variable, occurs when a user opens a specially crafted `.psd` image file. The underflow leads to parser confusion, enabling an attacker to inject arbitrary data as layer resource blocks. This can ultimately result in arbitrary code execution, allowing the attacker to run malicious code on the victim's system. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.15.0, a crafted PDF can cause long runtimes and large memory consumption when pypdf/_font.py function Font._collect_cid_character_widths expands unusually large CID font /W width ranges or excessive width entries during text extraction. This issue is fixed in 6.15.0. |
| Bolt CMS renders content field values through Twig's full application-level Environment with no SandboxExtension registered anywhere in the codebase. In src/Entity/Field.php, getTwigValue calls shouldBeRenderedAsTwig, which gates rendering only on the field definition's allow_twig flag and a regex checking for , , or ; when true, the raw field value is compiled and rendered via with no sandboxing. |
| The render-template component of ember-dynamic-render-template (addon/components/render-template.js) passes its property directly into Ember/Glimmer's compileTemplate (from @ember/template-compilation) with no sanitization, allow-listing, or validation of the input. |
