| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Update x2APIC MSR intercepts if AVIC is inhibited while L2 is active
Always update x2APIC MSR intercepts for L1 when AVIC is deactivated, even
if L2 is active and KVM is using a separate MSR bitmap to run L2. If AVIC
is fully enabled prior to running L2, and is then inhibited while L2 is
active (for a VM-scoped inhibit), then KVM will run L1 with AVIC disabled,
but with x2APIC MSR intercepts disabled, i.e. will allow L1 to read most of
the host's APIC state, send arbitrary interrupts, change task priority, and
ultimately trivially DoS the host.
E.g. sending a self-IPI in L1 on HYPERV_REENLIGHTENMENT_VECTOR, 0xee, with
CONFIG_HYPERV=n in the host kernel as a "safe" PoC, yields:
Spurious interrupt (vector 0xee) on CPU#425. Acked
And hacking KVM to abuse kvm_set_posted_intr_wakeup_handler() to register a
handler and WARN on POSTED_INTR_WAKEUP_VECTOR yields:
------------[ cut here ]------------
WARNING: arch/x86/kvm/svm/svm.c:5594 at pi_wakeup_handler+0x9/0x10 [kvm_amd], CPU#156: nested_x2apic_t/316940
CPU: 156 UID: 0 PID: 316940 Comm: nested_x2apic_t Tainted: G S U
Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
Hardware name: Google Astoria-Turin/astoria, BIOS 0.20260209.0-0 02/09/2026
RIP: 0010:pi_wakeup_handler+0x9/0x10 [kvm_amd]
Call Trace:
<IRQ>
sysvec_kvm_posted_intr_wakeup_ipi+0x64/0x80
</IRQ>
<TASK>
asm_sysvec_kvm_posted_intr_wakeup_ipi+0x1a/0x20
RIP: 0010:vcpu_run+0x1430/0x1e40 [kvm]
kvm_arch_vcpu_ioctl_run+0x2c1/0x600 [kvm]
kvm_vcpu_ioctl+0x580/0x6b0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x46ff4b
</TASK>
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: fix VF bringup affecting PF promiscuous state
Mbox handling of nix_set_rx_mode for a VF with promiscuous and
all_multi flags set to false causes deletion of the PF's promiscuous
and allmulti MCAM rules. This occurs because the APIs that
enable/disable these rules operate only on the PF, even when the
mbox request is made via a VF interface.
Guard both rvu_npc_enable_allmulti_entry() and
rvu_npc_enable_promisc_entry() disable paths with an is_vf() check so
that a VF bringing up or tearing down its interface cannot inadvertently
clear the PF's MCAM rules. |
| A weakness has been identified in Adblock for Youtube Extension up to 7.2.1 on Chrome. The impacted element is the function updateDynamicRules of the file contentscript.js of the component Event Listener. This manipulation of the argument yt-anti-adblock-detected causes improper authorization. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in LB-Link WR1210M 1.0.3. This impacts the function main of the file /www/cgi-bin/backup.cgi of the component Backup Endpoint. This manipulation causes missing authentication. The attack is only possible within the local network. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in Tenda AC10 16.03.10.09_multi_TDE01. This vulnerability affects the function R7WebsSecurityHandler of the component httpd. The manipulation leads to improper authentication. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. |
| A vulnerability has been found in SpaceX Starlink Router Gen 3 2025.11.14.mr64708.3. This affects the function get_status of the component gRPC Management Interface. The manipulation leads to improper access controls. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject exclusive maps for bpf_map_elem iterators
Exclusive maps (aka excl_prog_hash) are meant to be reachable only
from the single program whose hash matches. This is enforced by
check_map_prog_compatibility() when the map is referenced from a
program such as signed BPF loaders.
A bpf_map_elem iterator, however, binds its target map at attach
time in bpf_iter_attach_map() instead of referencing it from the
program, so the exclusivity check is never reached. On top of that,
the iterator exposes the map value as a writable buffer. |
| The 6Storage Rentals plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 2.27.0. This is due to the six_storage_create_wp_user() AJAX handler being registered on wp_ajax_nopriv_six_storage_create_wp_user without any nonce, capability, credential, or ownership verification, while calling wp_set_current_user() and wp_set_auth_cookie() for any WordPress user resolved by the attacker-supplied email address. This makes it possible for unauthenticated attackers to log in as any existing WordPress user, including administrators, by submitting that user's email address. |
| FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. When `secureEnabled=true`, FUXA `1.3.0-2773` still allows guest and invalid-token requests to read project, alarms, and scheduler APIs. Version 1.3.1 fixes this issue. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Catalyst SD-WAN engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20304 are related to improper access control issues that are grouped under the Common Weakness Enumeration (CWE) CWE-284. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XE Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20267 are related to improper access control issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-284. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco RoomOS engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20150 are related to improper access control that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-284. |
| Webhooks created by a collaborator keep firing after their repo access is revoked → ongoing real-time exfiltration of private repo content (incomplete revocation cleanup in `DeleteCollaboration`) |
| Branch Protection Bypass via PR Retargeting Preserves Stale `official` Approval Flag |
| Gitea Remember-Me Token Theft Not Invalidating Attacker Session |
| Privilege Escalation via Access Token Scope Escalation in API |
| Null Pointer Dereference in AddTime API Causes Authenticated Denial of Service |
| REST API exposes organization membership of private organizations to public |
| Public-Only Personal access tokens scope bypass in Organization and Permission Endpoints |
| Metacat is data repository software that helps researchers preserve, share, and discover data. Metacat versions 2.0.0 through 3.4.0 contain an unauthenticated SQL injection vulnerability in the `/cn/v1/object` and `/cn/v2/object` REST API endpoints due to unsanitized user input that can be passed through to the backend SQL database. The `nodeId` parameter can be modified to inject SQL commands, and the results are returned in error messages. Metacat appends the user-supplied data into the sql query without sanitization or parameterization. This allows extraction of arbitrary data from the underlying PostgresQL database, fully exposing protected information to the attacker. This is accomplished by leveraging the error reporting mechanisms in Metacat, where SQL error responses are mirrored back to the caller in the XML error message returned by Metacat. One approach, for example, is to use the PostgreSQL `CAST` function to generate an error with the results of an arbitrary subquery, which is then injected into the XML error message returned by Metacat. Attackers do not need to be authenticated to execute the attack. In addition, arbitrary SQL statements that insert, update, and delete data in the Metacat database can be executed, resulting in full compromise of all data in the database. Full proof of concept attacks have been developed and verified for these vulnerabilities. The impact of this vulnerability is critical for Metacat deployments in the DataONE network where information from the database can be exfiltrated, added, changed, or deleted. This includes management information about the data catalog, access log information about who accessed data, identifying information about individuals including their ORCID identifier and client IP address, access control information about who should be able to access and modify data, and other critical internals of the data system. This sql injection vulnerability was remediated fully in Metacat version 3.4.1. If upgrading to Metacat 3.4.1 isn't immediately possible, most deployments can mitigate the issue by disabling the `/cn` REST endpoints in the webapp deployment. This API is not needed or used by member repositories in the DataONE network, as it is only used by the DataONE Coordinating Node deployments. Consequently, this API can be disabled without reduction of functionality for most deployments. To disable the vulnerable endpoints, simply remove the servlet and servlet-mapping for the `/cn` endpoints in the servlet engine associated with the two servlets, `edu.ucsb.nceas.metacat.restservice.v1.CNRestServlet` and `edu.ucsb.nceas.metacat.restservice.v2.CNRestServlet`. For example, in Tomcat, remove the relevant `servlet-mapping` elements from the application web.xml file in Metacat. |
