| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix endpoint/socket association handling
Disassociating a socket from an endpoint via siw_socket_disassoc() may
release the last reference on that endpoint and free it. Therefore, don't
clear the endpoints socket pointer after calling that function, but
within.
This fixes a:
BUG: KASAN: slab-use-after-free in siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1053 drivers/infiniband/sw/siw/siw_cm.c:1075)
which occurred after processing a malformed MPA request during connection
establishment, causing the new endpoint to be closed. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Clear rb node linkage when freeing bpf_rb_root
bpf_rb_root_free() detaches the root by copying the current rb_root_cached
and then replacing the live root with RB_ROOT_CACHED. It then walks the
copied root and drops each object contained in the tree.
This leaves the rb node state intact while dropping the object. If the
object is refcounted and survives the drop, its bpf_rb_node_kern still
contains an owner pointer to the freed root and stale rb tree linkage. If
a later bpf_rb_root allocation reuses the same address, bpf_rbtree_remove()
can incorrectly pass the owner check and call rb_erase_cached() on a node
whose rb pointers belong to the old tree.
Mirror the list draining behavior by marking nodes as busy while the root
is being detached, then clear the rb node and release the owner before
dropping the containing object. This makes surviving nodes unowned and
safe to reject from remove or accept for a later add. |
| In the Linux kernel, the following vulnerability has been resolved:
kernfs: fix xattr race condition with multiple superblocks
Multiple superblocks with different namespaces can share the same
kernfs_node when kernfs_test_super() finds a matching root but
different namespace. This means multiple inodes from different
superblocks can reference the same kernfs_node->iattr->xattrs
structure.
The VFS layer only holds per-inode locks during xattr operations,
which is insufficient to serialize concurrent xattr modifications on
the shared kernfs_node. This can lead to race conditions in
simple_xattr_set() where the lookup->replace/remove sequence is not
atomic with respect to operations from other superblocks.
Fix this by protecting xattr operations with the existing hashed
kernfs_locks->open_file_mutex[] array, which is already used to
protect per-node open file data. The hashed mutex array provides
scalable per-node serialization (scaled by CPU count, up to 1024 locks
on 32+ CPU systems) with zero memory overhead.
Changes:
- Rename open_file_mutex[] to node_mutex[] to reflect dual purpose
- Add kernfs_node_lock_ptr() and kernfs_node_lock() helpers
- Protect simple_xattr_set() calls in kernfs_xattr_set() and
kernfs_vfs_user_xattr_set() with the hashed mutex
- Update file.c to use new helpers via compatibility wrappers
- Update documentation to explain the extended lock usage |
| In the Linux kernel, the following vulnerability has been resolved:
kernfs: link kn to its parent before the LSM init hook
After commit 12e9e3cd03b5 ("simpe_xattr: use per-sb cache"),
kernfs_xattr_set() and kernfs_xattr_get() compute the cache via
kernfs_root(kn) before any other check. kernfs_root(kn) walks
kn->__parent first and falls back to kn->dir.root, both of which are
NULL on a freshly kmem_cache_zalloc()'d kn. kn->__parent was being set
in kernfs_new_node() after __kernfs_new_node() returned, and kn->dir.root
is set even later by kernfs_create_dir_ns() / kernfs_create_empty_dir().
The LSM kernfs_init_security hook is invoked from inside
__kernfs_new_node(), before either field has been initialized.
selinux_kernfs_init_security() ends with kernfs_xattr_set(kn,
XATTR_NAME_SELINUX, ...). kernfs_root(kn) then returns NULL, and
&((struct kernfs_root *)NULL)->xa_cache evaluates to
offsetof(struct kernfs_root, xa_cache) which faults:
BUG: kernel NULL pointer dereference, address: 00000000000000e0
RIP: 0010:simple_xattr_set+0x27/0x8b0
Call Trace:
kernfs_xattr_set+0x63/0xb0
selinux_kernfs_init_security+0x13b/0x270
security_kernfs_init_security+0x36/0xc0
__kernfs_new_node+0x182/0x290
kernfs_new_node+0x80/0xc0
kernfs_create_dir_ns+0x2b/0xa0
cgroup_create+0x116/0x380
cgroup_mkdir+0x7c/0x1a0
Reproduces deterministically at PID 1 (systemd) on an SELinux-enabled
distro. The first cgroup mkdir under /sys/fs/cgroup with a labelled
parent panics the kernel.
The LSM hook's contract is that the kn_dir argument is the parent of
the new kn, so kn->__parent should already point at kn_dir when the
hook runs. Move kernfs_get(parent) and rcu_assign_pointer of
kn->__parent from kernfs_new_node() into __kernfs_new_node() right
before the security hook, and unwind the parent reference on the
err_out4 path. kernfs_root(kn) then takes its parent branch during
the hook and returns parent->dir.root, which is the correct root.
This also closes the same-shape latent bug in kernfs_xattr_get() (which
today is hidden only by kernfs_iattrs_noalloc() returning NULL on a
fresh kn). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wcn36xx: fix heap overflow from oversized firmware HAL response
The firmware response dispatcher copies all synchronous HAL responses
into the 4096-byte hal_buf without validating the response length. A
response exceeding WCN36XX_HAL_BUF_SIZE causes a heap buffer overflow
with firmware-controlled content.
Add a bounds check on the response length. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wcn36xx: fix OOB read from firmware count in PRINT_REG_INFO indication
The firmware-controlled rsp->count field is used as the loop bound for
indexing into the flexible rsp->regs[] array without validation against
the message length. A count exceeding the actual data causes out-of-
bounds reads from the heap-allocated message buffer.
Add a check that count fits within the received message. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Clear variable event pointer on read
snd_seq_read() copies a queued variable-length event header to userspace
before expanding the payload. Queued variable-length events use
SNDRV_SEQ_EXT_CHAINED internally, and data.ext.ptr points at the first
extension cell.
The read side strips SNDRV_SEQ_EXT_* bits from data.ext.len before the
copy, but it leaves data.ext.ptr untouched. A userspace sequencer client
can therefore write a direct variable event to itself and read back the
extension-cell kernel address from the returned header.
Clear the temporary header pointer before copy_to_user(). The original
queued event remains unchanged and is still passed to
snd_seq_expand_var_event(), so payload expansion keeps using the
internal chain. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject sleepable BPF_LSM_CGROUP programs at load time
The cgroup shim runs under rcu_read_lock_dont_migrate(), so we should
not attach any sleepable BPF programs there. Add support to the verifier
to explicitly reject attempts to load sleepable BPF programs destined
for LSM cgroup attachment.
Without this, we get the following splat from a BPF_LSM_CGROUP
program marked BPF_F_SLEEPABLE attached to file_open when it calls
bpf_get_dentry_xattr():
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1567
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 34317, name: load
preempt_count: 0, expected: 0
RCU nest depth: 2, expected: 0
Call Trace:
down_read+0x76/0x480
ext4_xattr_get+0x11f/0x700
__vfs_getxattr+0xf0/0x150
bpf_get_dentry_xattr+0xbb/0xf0
bpf_prog_e76a298dac9218c6_test_open+0x6a/0x85
__cgroup_bpf_run_lsm_current+0x326/0x840
bpf_trampoline_6442534646+0x62/0x14d
security_file_open+0x34/0x60
do_dentry_open+0x340/0x1260
vfs_open+0x7a/0x440
path_openat+0x1bac/0x30a0
libbpf provides a .s named section variant for every sleepable
program type except lsm_cgroup, reflecting that per-cgroup LSM programs
are intended to only run in a non-sleepable context.
The above splat was obtained by bypassing libbpf by using bpf(2)
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NMI/tracepoint re-entry deadlock on lru locks
NMI and tracepoint BPF programs can re-enter the per-CPU or global
LRU lock that bpf_lru_pop_free()/push_free() already hold on the
same CPU, AA-deadlocking. Lockdep reports "inconsistent
{INITIAL USE} -> {IN-NMI}" on &l->lock (syzbot c69a0a2c816716f1e0d5)
and "possible recursive locking detected" on &loc_l->lock (syzbot
18b26edb69b2e19f3b33).
Prior trylock and rqspinlock based fixes (see links) were nacked
because compromised on reliability.
This patch converts every LRU lock site to rqspinlock_t and adds a
recovery path for some failure windows to avoid node leaks.
Failure recovery:
- *_pop_free top-level: return NULL; prealloc_lru_pop() already
treats that as no-free-element (-ENOMEM).
- Cross-CPU steal: skip the victim's locked loc_l, try next CPU.
- Post-steal local lock fail: publish stolen node to lockless
per-CPU free_llist; next pop on this CPU picks it up.
- push_free fail: mark node pending_free=1. __local_list_flush(),
__local_list_pop_pending() reclaim the node from pending_list.
__bpf_lru_list_shrink_inactive() reclaims the node from inactive
list. Nodes from active list are reclaimed by __bpf_lru_list_shrink()
or after __bpf_lru_list_rotate_active() demotes it to the inactive. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: bound S1G TIM PVB walk to the TIM element
ieee80211_s1g_check_tim() parses the S1G Partial Virtual Bitmap (PVB) of a
received TIM element. The TIM is handed in as the element payload:
ieee802_11_parse_elems_full() stores elems->tim = elem->data and
elems->tim_len = elem->datalen (net/mac80211/parse.c), so the valid bytes
are [tim, tim + tim_len).
When walking the encoded blocks the function passes the walker an end
sentinel of (const u8 *)tim + tim_len + 2, i.e. two bytes past the end of
the element. ieee80211_s1g_find_target_block() loops while (ptr + 1 <= end)
and dereferences ptr (and the per-mode ieee80211_s1g_len_*() helpers read
*ptr), so it can read up to two bytes beyond the TIM element -- an
out-of-bounds read of adjacent skb/heap data when the TIM is the last
element in the frame. The +2 appears to account for the element id/len
header, but tim already points past that header at the element payload, so
the addend is wrong.
Pass the correct element end, (const u8 *)tim + tim_len. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL pointer dereference in bpf_task_from_vpid()
bpf_task_from_vpid() looks up a task in the pid namespace of the
current task, via find_task_by_vpid():
find_task_by_vpid(vpid)
find_task_by_pid_ns(vpid, task_active_pid_ns(current))
find_pid_ns(nr, ns) -> idr_find(&ns->idr, nr)
cgroup_skb programs run in softirq, which may interrupt a task that is
itself in do_exit(). Once that task has passed
exit_notify() -> release_task() -> __unhash_process(), its thread_pid is
cleared, so task_active_pid_ns(current) returns NULL and find_pid_ns()
dereferences &NULL->idr:
BUG: kernel NULL pointer dereference, address: 0000000000000050
RIP: 0010:idr_find+0x11/0x30 lib/idr.c:176
Call Trace:
<IRQ>
find_pid_ns kernel/pid.c:370 [inline]
find_task_by_pid_ns+0x3b/0xe0 kernel/pid.c:485
bpf_task_from_vpid+0x5b/0x200 kernel/bpf/helpers.c:2916
bpf_prog_run_array_cg+0x17e/0x530 kernel/bpf/cgroup.c:81
__cgroup_bpf_run_filter_skb+0x12b/0x250 kernel/bpf/cgroup.c:1612
sk_filter_trim_cap+0x1dc/0x4c0 net/core/filter.c:148
tcp_v4_rcv+0x18d1/0x2200 net/ipv4/tcp_ipv4.c:2223
</IRQ>
<TASK>
do_exit+0xa63/0x1270 kernel/exit.c:1010
get_signal+0x141c/0x1530 kernel/signal.c:3037
Bail out when current has no pid namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/nldev: Fix locking when accessing mr->pd
Sashiko points out that, due to rereg_mr, the PD is actually variable and
all the touches in nldev are racy.
Use mr->device instead of mr->pd->device.
Getting the PD restrack ID is more tricky. To avoid disturbing all the
happy paths, add an rdma_restrack_sync() operation which is sort of like
flush_workqueue() or synchronize_irq(): after it returns, all the old
nldev touches to the mr are gone and everything sees the new PD. This
makes it safe to reach into the PD pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp-sdw-legacy: Bound DAI link iteration
create_sdw_dailinks() walks soc_dais until it finds an entry with
initialised cleared, but soc_dais is allocated with exactly num_ends
entries. If all entries are initialised, the loop reads past the end of
the array.
This was reported by KASAN:
BUG: KASAN: slab-out-of-bounds in mc_probe+0x26b3/0x2774 [snd_acp_sdw_legacy_mach]
Read of size 1
Pass the allocated entry count to create_sdw_dailinks() and stop before
reading past the array. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp-sdw-sof: Bound DAI link iteration
create_sdw_dailinks() walks sof_dais until it finds an entry with
initialised cleared, but sof_dais is allocated with exactly num_ends
entries. If all entries are initialised, the loop reads past the end of
the array.
Pass the allocated entry count to create_sdw_dailinks() and stop before
reading past the array. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: Fix recursive lock in device_cache_fw_images()
A recursive locking deadlock can occur in the firmware loader's power
management notification handler.
During system suspend or hibernation preparation, fw_pm_notify() calls
device_cache_fw_images(). This function acquires fw_lock to set the
firmware cache state to FW_LOADER_START_CACHE and then iterates over all
devices using dpm_for_each_dev() while still holding the lock.
For each device, dev_cache_fw_image() schedules asynchronous work to cache
the firmware. If memory allocation for the async work entry fails (e.g., in
out-of-memory conditions), async_schedule_node_domain() falls back to
executing the work function synchronously in the current thread.
The synchronous execution path (__async_dev_cache_fw_image() ->
cache_firmware() -> request_firmware() -> assign_fw()) attempts to acquire
fw_lock again. Since the current thread already holds fw_lock, this results
in a recursive locking deadlock.
Fix this by releasing fw_lock immediately after updating the cache state
and before calling dpm_for_each_dev(). The lock is only needed to protect
the state update. Concurrent firmware requests will correctly see the
FW_LOADER_START_CACHE state and use the piggyback mechanism, which is
independently protected by its own fwc->name_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: fix lockless traversals of ->s_children
Having the parent directory locked protects entries from removal
by another thread, but it does *not* protect cursors from being
moved around by lseek() - or freed, for that matter. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: unregister PM notifier on watchdog unregister
watchdog_register_device() registers wdd->pm_nb when
WDOG_NO_PING_ON_SUSPEND is set, but watchdog_unregister_device() does not
remove it. This leaves an embedded notifier block on the PM notifier chain
after the watchdog device has been unregistered.
A later suspend/resume notification can then call watchdog_pm_notifier()
with a stale watchdog_device pointer, or at minimum after wdd->wd_data has
been cleared by watchdog_dev_unregister().
Unregister the PM notifier before tearing down the watchdog device. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Destroy the pages content after detaching from dmabuf
Sashiko points out this has gotten out of order, the mutex could still be
in use through the dmabuf invalidation callbacks. Don't destroy any of the
pages content until the dmabuf is fully detached. |
| In the Linux kernel, the following vulnerability has been resolved:
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
find_vm_area() can return NULL if the given address is not a valid vmalloc
area. Check the return value before dereferencing it to avoid a kernel
crash. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix resource leak in probe error path
When pcim_iomap_region() or devm_kmemdup() fail, the code returns
directly without cleaning up previously allocated resources:
- mt76_device allocated by mt76_alloc_device()
- pci irq vectors allocated by pci_alloc_irq_vectors()
Fix this by jumping to the existing error cleanup path instead of
returning directly. |
