| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: rockchip: guard VPU981 AV1 divisor and tile buffer
rockchip_vpu981_av1_dec_set_tile_info() divides context_update_tile_id by
tile_info->tile_cols and writes one descriptor per tile into the tile_info
DMA buffer, which holds AV1_MAX_TILES entries; tile_cols and tile_rows
come from the bitstream. Guard the division against a zero tile_cols by
initialising the context-update values to zero and computing them only
when tile_cols is non-zero, and stop the descriptor writes once the
tile_info buffer is full. The tile geometry written to the hardware
registers is left unmodified; the per-dimension and total tile bounds are
enforced by the control validation. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: bound AV1 tile-start copy to the array capacity
vdec_av1_slice_setup_tile() copies tile_cols + 1 / tile_rows + 1 entries
into mi_col_starts[] / mi_row_starts[] from the bitstream tile_info. Bound
the copy to the array capacity. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: sprd: validate compress buffer sizes against fixed allocations
sprd_platform_compr_open() allocates the stage 0 IRAM buffer (32K data
area) and the stage 1 DDR buffer (2M data area) with fixed sizes, but
sprd_platform_compr_copy() derives all copy lengths from the user
controlled runtime->fragment_size and the write() count, never
comparing them against the physical buffer sizes. The compress core
only checks fragment_size * fragments for an u32 overflow in
snd_compress_check_input(), so a local user can configure a logical
buffer of up to ~4GB via SNDRV_COMPRESS_SET_PARAMS, far exceeding the
fixed allocations.
A fragment_size larger than the 32K IRAM data area makes the stage 0
copy_from_user() overflow past the IRAM allocation, and a buffer_size
larger than the 2M DDR buffer makes the wrapping copy at the end of
sprd_platform_compr_copy() write fully user controlled data past the
buffer. No SNDRV_PCM_TRIGGER_START is needed, a write() in SETUP
state reaches the copy callback directly.
Reject parameters that do not fit into the fixed buffers in
set_params(), and fix the advertised max fragment size: 128K never
fitted into the 32K IRAM buffer. The caps values may have been carried over
from the qdsp6 driver, which allocates its buffers according to the
advertised maxima, unlike this driver. With 32K as max fragment size
the advertised limits are self-consistent: 32K * 64 = 2M equals the
DDR buffer size.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: backtrack_insn(): Handle ld_{abs,ind} subprog exit edge
Nicholas Carlini reported a bug in precision backtracking mechanism
for BPF_LD | BPF_{IND,ABS} instructions. These instructions are
modelled as two branches:
- fallthrough;
- implicit exit from current subprogram.
The implicit exit case was not handled by the backtrack_insn()
function. When backtracking such a path backtrack_insn() did not
call bt_subprog_enter(), which meant that backtracking continued
manipulating precision marks in a caller frame, while looking at
instructions in a callee frame.
This lead to segmentation faults during verification (see the
selftest), or unsound state pruning. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix reversed sequence option serialization
hton_seq() expects the host-order source first and the unaligned
network-order destination second. The version 1 sync sender passes these
arguments in reverse for both sequence blocks. This leaves 24 bytes of the
kmalloc-backed message unwritten. It may disclose stale heap data and
replace the live connection sequence state with values read from the
buffer.
Pass the connection sequence state as the source and the message payload as
the destination for both blocks. |
| Taskview Community before 1.56.0 contains a missing authentication vulnerability that allows unauthenticated attackers to register arbitrary OAuth clients and take over user accounts by exploiting the OAuth 2.0 Dynamic Client Registration endpoint, which is enabled by default and requires no authentication. Attackers can send a POST request to the registration endpoint to obtain a client_id and client_secret, then craft a malicious authorization link pointing to an attacker-controlled redirect URI to capture authorization codes and exchange them for access tokens granting full API access to victim account data. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Enhance OEM ID and Table ID validation in acpi_ex_load_table_op()
Enhance OEM ID and Table ID validation in acpi_ex_load_table_op() to
prevent buffer overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: fix 'hdev->discovery.uuids' NULL dereference
'uuid_count' member of struct 'discovery_state' is assigned and read
without any locks, so there is a chance of situation when
uuid_count != 0, but uuids is NULL and there will be NULL pointer
dereference.
Possible race:
'hci_update_passive_scan_sync'
'hci_discovery_filter_clear'
hdev->discovery.uuid_count = 0;
<----------------------preempted----------------------------->
'start_service_discovery'
// Set uuid_count to value != 0
hdev->discovery.uuid_count = uuid_count;
hdev->discovery.uuids = kmemdup(...);
<----------------------preempted----------------------------->
spin_lock(&hdev->discovery.lock);
kfree(hdev->discovery.uuids);
hdev->discovery.uuids = NULL;
spin_unlock(&hdev->discovery.lock);
Now uuids == NULL and uuid_count != 0.
So 'mgmt_device_found' -> 'is_filter_match' -> 'eir_has_uuids' receives
non consistent discovery state, where NULL dereference of uuids happens.
To fix it let's add discovery.lock around every read/write of uuid_count,
uuids pair of struct members. It is also important to assign uuid_count
value only after success kmemdup() allocation in
start_service_discovery(), otherwise uuids is NULL, because kmemdup failed,
but uuid_count is already assigned to non zero value.
The following panic happens:
[ ] ------------[ cut here ]------------
[ ] Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000000
[ ] Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
[ ] CPU: 0 PID: 15056 Comm: kworker/u9:2
[ ] Workqueue: hci0 hci_rx_work
[ ] pstate: 10400009 (nzcV daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ ] pc : eir_has_uuids+0x2d8/0x590
[ ] lr : is_filter_match+0x258/0x320
...
[ ] Call trace:
[ ] eir_has_uuids+0x2d8/0x590
[ ] is_filter_match+0x258/0x320
[ ] mgmt_device_found+0x5b0/0xafc
[ ] process_adv_report.part.0+0x8c8/0xf14
[ ] hci_le_adv_report_evt+0x338/0x3f0
[ ] hci_le_meta_evt+0x1f0/0x4c8
[ ] hci_event_packet+0x440/0xc9c
[ ] hci_rx_work+0x44c/0xaf8
[ ] process_one_work+0x54c/0x103c
[ ] worker_thread+0x6c4/0x10c4
[ ] kthread+0x274/0x2ec
[ ] ret_from_fork+0x10/0x20
[ ] Code: 14000004 91004021 eb14003f 54000180 (f9400024)
[ ] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/efa: Fix PBL chunk length computation
On register MR, when creating the PBL, if it's an indirect PBL we create
a chunk list to hold the PBL pages pointers. Each chunk is 4KB in size
and can hold 510 addresses (EFA_PTRS_PER_CHUNK) and has a 12-byte
control buffer at the end of it holding the next chunk's pointer and its
length.
If the PBL number of pages is a multiple of EFA_PTRS_PER_CHUNK, the
calculated last chunk length is wrongly computed as 0, even though that
chunk is fully populated with 510 real page pointers. This wrong length
is used both to DMA map the chunk and is propagated to the device,
causing the device to see the chunk as empty and reject the memory
registration.
Fix the calculation so it will be performed only if the number of pages
isn't a multiple of EFA_PTRS_PER_CHUNK, if it is, its already handled in
the above loop correctly.
Also prevent out-of-bounds reach in the chunks array in such scenario. |
| In the Linux kernel, the following vulnerability has been resolved:
omfs: handle set_blocksize failures
omfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix a possible underflow
We shouldn't trust the firmware about the length of the wowlan packet. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix buffer overflow during vBIOS update
Clamp the buffer postion to write by setting the bin attribute
to the maximum buffer size so that VFS layer will block the
out-of-bounds accessing. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: handle set_blocksize failures
jfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
genirq/proc: Size interrupt directory names for 10-digit interrupt numbers
/proc/irq/<n>/ directory names are built in `char name[10]` buffers
with `sprintf(name, "%u", irq)`.
Ten-digit IRQ numbers already need 11 bytes including the trailing NUL, and
current sparse-IRQ configurations allow interrupt numbers in that range.
Size the temporary name buffer for the current decimal form and switch
to bounded formatting when creating or removing the proc entry. |
| libvips 8.19.0 contains a memory access vulnerability when processing little-endian PFM images. If the PFM text header length is not a multiple of four bytes, the mmap-based loader can expose pixel data at an address that is not properly aligned for float access. vips_avg_scan() subsequently dereferences the buffer through a float pointer, resulting in undefined behavior and process termination on strict-alignment architectures or UBSan-instrumented builds, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: bound aligned TLV advance in FW parser
Validate ALIGN(tlv_len, 4) against remaining parser length before
consuming bytes from the firmware image.
This avoids length underflow on malformed TLVs. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Add package limit checks in parser functions
Add package limit checks in parser functions to prevent out-of-bounds
access. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Fix condition check in acpi_ps_parse_loop()
Fix condition check for AML_ELSE_OP in acpi_ps_parse_loop() to prevent
out-of-bounds access. |
| URL path injection in the Microsoft Graph adapter of Swoosh. Swoosh.Adapters.MsGraph builds its Microsoft Graph API request URL by interpolating the sender's email address into the URL path (/users/{from}/sendMail) without percent-encoding or validation.
In applications that derive the from address from untrusted or user-influenced input (for example a relay, a contact form, or a "send as" feature), an attacker can place URL-special characters such as /, ?, or # in the local part of the address to escape the intended path segment and rewrite the path and query string of the request. Because the same authenticated POST is sent with the application's Microsoft Graph bearer token, the attacker can redirect it to other Graph endpoints within the token's scopes and control the request's query string. Applications that always use a fixed, trusted from address are not affected.
This issue affects swoosh: from 1.12.0 before 1.26.3. |
| Improper Encoding or Escaping of Output vulnerability in elixir-tesla tesla allows multipart part header injection via unescaped Content-Disposition parameter values.
Tesla.Multipart.part_headers_for_disposition/1 interpolates each disposition parameter as #{k}="#{v}" with no validation of CR (\r), LF (\n), or double-quote characters. The values come verbatim from the caller via Tesla.Multipart.add_field/4 (the name parameter), Tesla.Multipart.add_file/3, and Tesla.Multipart.add_file_content/4 (both the filename parameter and other disposition opts). A " in the value closes the quoted parameter early; a \r\n ends the Content-Disposition header line and starts a new part header (such as a forged Content-Type), or, after a second \r\n, ends the entire part header block and prepends bytes to the part body. The default-filename path in add_file/3 derives the filename via Path.basename/1, which does not strip CR or LF, so any application forwarding a partially-attacker-controlled file path inherits the same issue.
This issue affects tesla: from 0.8.0 before 1.18.3. |
