| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Eclipse OMR versions up to 0.11, the arraycmp SIMD implementation for Z and P does not check if the number of bytes to compare is zero. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: stub: Reject I2C block transfers with invalid length
The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]
as the transfer length. The existing check only clamps it to avoid
overrunning the chip->words[256] register array, but does not validate
it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union
i2c_smbus_data.block buffer (34 bytes total). The driver is a
development/test tool (CONFIG_I2C_STUB=m, not built by default)
that must be loaded with a chip_addr= parameter.
A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl
with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing
stub_xfer() to read or write past the end of the union
i2c_smbus_data.block buffer:
BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223)
Read of size 1 at addr ffff88800abcfd92 by task exploit/81
Call Trace:
<TASK>
stub_xfer (drivers/i2c/i2c-stub.c:223)
__i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593)
i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536)
i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391)
i2cdev_ioctl (drivers/i2c/i2c-dev.c:478)
__x64_sys_ioctl (fs/ioctl.c:583)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
The bug exists because i2c-stub implements .smbus_xfer directly,
bypassing the I2C_SMBUS_BLOCK_MAX validation in
i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same
function correctly validates against I2C_SMBUS_BLOCK_MAX, but the
I2C_SMBUS_I2C_BLOCK_DATA case does not.
Fix by rejecting transfers with data->block[0] == 0 or
data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with
both the I2C_SMBUS_BLOCK_DATA case in the same function and the
I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated(). |
| DNG SDK versions 1.7.1 2536 and earlier are affected by a Stack-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| A flaw was found in `guardrails-detectors`, a component of Red Hat OpenShift AI. This vulnerability, known as Regular Expression Denial of Service (ReDoS), allows a remote attacker to provide specially crafted regular expressions to the public detection API. This can cause catastrophic backtracking, leading to a worker process consuming 100% CPU indefinitely and resulting in a denial of service for the entire guardrails-mediated LLM pipeline. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Validate payload length and link_index in dc_process_dmub_aux_transfer_async
[Why&How]
dc_process_dmub_aux_transfer_async() copies payload->length bytes into a
16-byte stack buffer (dpaux.data[16]) guarded only by an ASSERT(), which
is a no-op in release builds. If a caller ever passes length > 16 this
results in a stack buffer overflow via memcpy.
Additionally, link_index is used to dereference dc->links[] without
bounds checking against dc->link_count, risking an out-of-bounds access.
Replace the ASSERT with a hard runtime check that returns false when
payload->length exceeds the destination buffer size, and add a bounds
check for link_index before it is used.
(cherry picked from commit ba4caa9fecdf7a38f98c878ad05a8a64148b6881) |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: avoid double free of pool->stack on AQ init failure
otx2_pool_aq_init() frees pool->stack when mailbox sync or retry
allocation fails, but leaves the pointer unchanged. Later,
otx2_sq_aura_pool_init() unwinds the partial setup through
otx2_aura_pool_free(), which frees pool->stack again. The CN20K-specific
cn20k_pool_aq_init() implementation has the same bug in
its corresponding error path.
Set pool->stack to NULL immediately after the local free so the shared
cleanup path does not free the same stack again while cleaning up
partially initialized pool state.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
v7.1-rc3.
Runtime validation was not performed because reproducing this path
requires OcteonTX2/CN20K hardware. |
| n8n before 1.123.67, 2.31.5, and 2.32.1 contains a prototype pollution vulnerability in the Edit Fields (Set) node. The node assigns output fields via a dot-notation path setter without restricting the field name, allowing an authenticated user to name a field after an inherited built-in method path and corrupt a shared global in the main Node.js process. Because that global is used on the request-authentication path, the instance then fails every authenticated request, causing an instance-wide denial of service for all users until the process is restarted. |
| Cachet through 2.4.1 contains a server-side template injection vulnerability in incident template rendering that allows authenticated users to execute arbitrary PHP code. Attackers can create malicious incident templates with Blade directives or Twig filters that execute system commands when incidents are created, achieving remote code execution as the web server process. |
| A buffer overflow vulnerability was found in the command line interface of AOS-CX. Successful exploitation of these vulnerabilities could allow an remote low-privileged user to execute arbitrary code as a privileged user on the underlying operating system. |
| Buffer overflow vulnerabilities exist in the command line interface of AOS-CX. Successful exploitation of these vulnerabilities could allow a remote high-privileged user to execute arbitrary code as a privileged user on the underlying operating system. |
| Affected versions of cti-transmute improperly handle conversion-table values passed through the search highlighting feature. The highlight() function previously returned the underlying text directly when no search query was supplied, or performed a regex replacement that inserted <mark> tags without first escaping the original content. Because the resulting value is used by an HTML-rendering sink, malicious markup contained in conversion data could be interpreted as HTML rather than displayed as text.
The fix introduces a shared highlightMatches() helper that first converts special characters such as <, >, &, and quotes into HTML entities. Only after escaping does the code insert the application-controlled <mark> element used for search highlighting. |
| Improper Validation of Specified Quantity in Input vulnerability in Samsung Open Source rlottie allows Input Data Manipulation. |
| Improper Validation of Specified Quantity in Input and Allocation of Resources Without Limits or Throttling vulnerability in Samsung Open Source rlottie allows Excessive Allocation. |
| In OpENer 2.3.0 (commit 76b95cf) when parsing incoming CIP (Common Industrial Protocol) network packets, the length parameter is inconsistently typed across the call stack. Specifically, an upstream length calculated as an int is passed to a downstream function that expects an EipInt16 (a 16-bit signed integer). If a maliciously crafted packet with specific length fields is processed, the length parameter can overflow or be truncated into a negative value. This negative length bypasses subsequent bounds checking (due to signed/unsigned comparison issues) and is ultimately used in memory operations, leading to a Stack Buffer Overflow when reading data in DecodePaddedEPath. |
| EIPStackGroup OpENer 2.3.0 (commit 76b95cf) has an out-of-bounds read issue in Connection Manager handling of ForwardOpen requests when processing short malformed packets. An attacker can send a valid ENIP outer frame carrying a malformed CIP ForwardOpen/LargeForwardOpen request, causing the parser to continue reading fields even when request data is insufficient. This issue is remotely triggerable via network traffic and does not require authentication. |
| OpENer 2.3.0 (master branch up to commit 76b95cf) is vulnerable to a severe memory corruption issue caused by an integer underflow in the processing of connected explicit messages (SendUnitData). |
| OpENer 2.3.0 (commit 76b95cf) has an out-of-bounds read issue in CIP message parsing when handling malformed explicit requests with a forged EPath size. An attacker can send a valid ENIP SendRRData frame carrying a very short CIP payload whose path_size field claims that many more path words are present than are actually available. Because the parser trusts the attacker-controlled path_size and continues decoding path segments without a remaining-length boundary, it reads beyond the end of the stack receive buffer. |
| Kitty is a cross-platform GPU based terminal. Prior to 0.48.2, the @kitty-echo and @kitty-ssh DCS handlers in kitty/window.py write unauthenticated data to the child shell's stdin, where handle_remote_echo accepts printable shell command characters and handle_remote_ssh calls get_ssh_data in kittens/ssh/utils.py, which emits a newline; chaining the handlers can execute attacker-controlled commands when a user displays untrusted terminal data. This issue is fixed in version 0.48.2. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Validate GPIO pin LUT table size before iterating
[Why&How]
The GPIO pin table parsers in get_gpio_i2c_info() and
bios_parser_get_gpio_pin_info() derive an element count from the VBIOS
table_header.structuresize field, then iterate over gpio_pin[] entries.
However, GET_IMAGE() only validates that the table header itself fits
within the BIOS image. If the VBIOS reports a structuresize larger than
the actual mapped data, the loop reads past the end of the BIOS image,
causing an out-of-bounds read.
Fix this by calling bios_get_image() to validate that the full claimed
structuresize is accessible within the BIOS image before entering the
loop in both functions.
(cherry picked from commit ba5e95b43b773ae1bf1f66ee6b31eb774e65afe3) |
| In the Linux kernel, the following vulnerability has been resolved:
fwctl: pds: Validate RPC input size before parsing
The fwctl core allocates the device-specific RPC input buffer with
fwctl_rpc.in_len and passes that buffer to the driver callback.
pdsfc_fw_rpc() casts the buffer to struct fwctl_rpc_pds and then calls
pdsfc_validate_rpc(), which reads fields from that structure before
checking that the input buffer is large enough to contain it. A short
in_len can make pds_fwctl read beyond the allocation.
Reject pds RPC buffers that are smaller than struct fwctl_rpc_pds before
parsing any pds-specific fields. |
