Export limit exceeded: 373861 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20888 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-52852 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix to avoid use-after-free on dic Call trace: __memcpy+0x128/0x250 f2fs_read_multi_pages+0x940/0xf7c f2fs_mpage_readpages+0x5a8/0x624 f2fs_readahead+0x5c/0x110 page_cache_ra_unbounded+0x1b8/0x590 do_sync_mmap_readahead+0x1dc/0x2e4 filemap_fault+0x254/0xa8c f2fs_filemap_fault+0x2c/0x104 __do_fault+0x7c/0x238 do_handle_mm_fault+0x11bc/0x2d14 do_mem_abort+0x3a8/0x1004 el0_da+0x3c/0xa0 el0t_64_sync_handler+0xc4/0xec el0t_64_sync+0x1b4/0x1b8 In f2fs_read_multi_pages(), once f2fs_decompress_cluster() was called if we hit cached page in compress_inode's cache, dic may be released, it needs break the loop rather than continuing it, in order to avoid accessing invalid dic pointer. | ||||
| CVE-2022-49201 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ibmvnic: fix race between xmit and reset There is a race between reset and the transmit paths that can lead to ibmvnic_xmit() accessing an scrq after it has been freed in the reset path. It can result in a crash like: Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc0080000016189f8 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0080000016189f8] ibmvnic_xmit+0x60/0xb60 [ibmvnic] LR [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280 Call Trace: [c008000001618f08] ibmvnic_xmit+0x570/0xb60 [ibmvnic] (unreliable) [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280 [c000000000c9cfcc] sch_direct_xmit+0xec/0x330 [c000000000bfe640] __dev_xmit_skb+0x3a0/0x9d0 [c000000000c00ad4] __dev_queue_xmit+0x394/0x730 [c008000002db813c] __bond_start_xmit+0x254/0x450 [bonding] [c008000002db8378] bond_start_xmit+0x40/0xc0 [bonding] [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280 [c000000000c00ca4] __dev_queue_xmit+0x564/0x730 [c000000000cf97e0] neigh_hh_output+0xd0/0x180 [c000000000cfa69c] ip_finish_output2+0x31c/0x5c0 [c000000000cfd244] __ip_queue_xmit+0x194/0x4f0 [c000000000d2a3c4] __tcp_transmit_skb+0x434/0x9b0 [c000000000d2d1e0] __tcp_retransmit_skb+0x1d0/0x6a0 [c000000000d2d984] tcp_retransmit_skb+0x34/0x130 [c000000000d310e8] tcp_retransmit_timer+0x388/0x6d0 [c000000000d315ec] tcp_write_timer_handler+0x1bc/0x330 [c000000000d317bc] tcp_write_timer+0x5c/0x200 [c000000000243270] call_timer_fn+0x50/0x1c0 [c000000000243704] __run_timers.part.0+0x324/0x460 [c000000000243894] run_timer_softirq+0x54/0xa0 [c000000000ea713c] __do_softirq+0x15c/0x3e0 [c000000000166258] __irq_exit_rcu+0x158/0x190 [c000000000166420] irq_exit+0x20/0x40 [c00000000002853c] timer_interrupt+0x14c/0x2b0 [c000000000009a00] decrementer_common_virt+0x210/0x220 --- interrupt: 900 at plpar_hcall_norets_notrace+0x18/0x2c The immediate cause of the crash is the access of tx_scrq in the following snippet during a reset, where the tx_scrq can be either NULL or an address that will soon be invalid: ibmvnic_xmit() { ... tx_scrq = adapter->tx_scrq[queue_num]; txq = netdev_get_tx_queue(netdev, queue_num); ind_bufp = &tx_scrq->ind_buf; if (test_bit(0, &adapter->resetting)) { ... } But beyond that, the call to ibmvnic_xmit() itself is not safe during a reset and the reset path attempts to avoid this by stopping the queue in ibmvnic_cleanup(). However just after the queue was stopped, an in-flight ibmvnic_complete_tx() could have restarted the queue even as the reset is progressing. Since the queue was restarted we could get a call to ibmvnic_xmit() which can then access the bad tx_scrq (or other fields). We cannot however simply have ibmvnic_complete_tx() check the ->resetting bit and skip starting the queue. This can race at the "back-end" of a good reset which just restarted the queue but has not cleared the ->resetting bit yet. If we skip restarting the queue due to ->resetting being true, the queue would remain stopped indefinitely potentially leading to transmit timeouts. IOW ->resetting is too broad for this purpose. Instead use a new flag that indicates whether or not the queues are active. Only the open/ reset paths control when the queues are active. ibmvnic_complete_tx() and others wake up the queue only if the queue is marked active. So we will have: A. reset/open thread in ibmvnic_cleanup() and __ibmvnic_open() ->resetting = true ->tx_queues_active = false disable tx queues ... ->tx_queues_active = true start tx queues B. Tx interrupt in ibmvnic_complete_tx(): if (->tx_queues_active) netif_wake_subqueue(); To ensure that ->tx_queues_active and state of the queues are consistent, we need a lock which: - must also be taken in the interrupt path (ibmvnic_complete_tx()) - shared across the multiple ---truncated--- | ||||
| CVE-2022-48864 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command When control vq receives a VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command request from the driver, presently there is no validation against the number of queue pairs to configure, or even if multiqueue had been negotiated or not is unverified. This may lead to kernel panic due to uninitialized resource for the queues were there any bogus request sent down by untrusted driver. Tie up the loose ends there. | ||||
| CVE-2025-68256 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix out-of-bounds read in rtw_get_ie() parser The Information Element (IE) parser rtw_get_ie() trusted the length byte of each IE without validating that the IE body (len bytes after the 2-byte header) fits inside the remaining frame buffer. A malformed frame can advertise an IE length larger than the available data, causing the parser to increment its pointer beyond the buffer end. This results in out-of-bounds reads or, depending on the pattern, an infinite loop. Fix by validating that (offset + 2 + len) does not exceed the limit before accepting the IE or advancing to the next element. This prevents OOB reads and ensures the parser terminates safely on malformed frames. | ||||
| CVE-2025-68265 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix admin request_queue lifetime The namespaces can access the controller's admin request_queue, and stale references on the namespaces may exist after tearing down the controller. Ensure the admin request_queue is active by moving the controller's 'put' to after all controller references have been released to ensure no one is can access the request_queue. This fixes a reported use-after-free bug: BUG: KASAN: slab-use-after-free in blk_queue_enter+0x41c/0x4a0 Read of size 8 at addr ffff88c0a53819f8 by task nvme/3287 CPU: 67 UID: 0 PID: 3287 Comm: nvme Tainted: G E 6.13.2-ga1582f1a031e #15 Tainted: [E]=UNSIGNED_MODULE Hardware name: Jabil /EGS 2S MB1, BIOS 1.00 06/18/2025 Call Trace: <TASK> dump_stack_lvl+0x4f/0x60 print_report+0xc4/0x620 ? _raw_spin_lock_irqsave+0x70/0xb0 ? _raw_read_unlock_irqrestore+0x30/0x30 ? blk_queue_enter+0x41c/0x4a0 kasan_report+0xab/0xe0 ? blk_queue_enter+0x41c/0x4a0 blk_queue_enter+0x41c/0x4a0 ? __irq_work_queue_local+0x75/0x1d0 ? blk_queue_start_drain+0x70/0x70 ? irq_work_queue+0x18/0x20 ? vprintk_emit.part.0+0x1cc/0x350 ? wake_up_klogd_work_func+0x60/0x60 blk_mq_alloc_request+0x2b7/0x6b0 ? __blk_mq_alloc_requests+0x1060/0x1060 ? __switch_to+0x5b7/0x1060 nvme_submit_user_cmd+0xa9/0x330 nvme_user_cmd.isra.0+0x240/0x3f0 ? force_sigsegv+0xe0/0xe0 ? nvme_user_cmd64+0x400/0x400 ? vfs_fileattr_set+0x9b0/0x9b0 ? cgroup_update_frozen_flag+0x24/0x1c0 ? cgroup_leave_frozen+0x204/0x330 ? nvme_ioctl+0x7c/0x2c0 blkdev_ioctl+0x1a8/0x4d0 ? blkdev_common_ioctl+0x1930/0x1930 ? fdget+0x54/0x380 __x64_sys_ioctl+0x129/0x190 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f765f703b0b Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d dd 52 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe2cefe808 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffe2cefe860 RCX: 00007f765f703b0b RDX: 00007ffe2cefe860 RSI: 00000000c0484e41 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000000 R10: 00007f765f611d50 R11: 0000000000000202 R12: 0000000000000003 R13: 00000000c0484e41 R14: 0000000000000001 R15: 00007ffe2cefea60 </TASK> | ||||
| CVE-2026-64371 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: proc: protect ptrace_may_access() with exec_update_lock (part 1) Fix the easy cases where procfs currently calls ptrace_may_access() without exec_update_lock protection, where the fix is to simply add the extra lock or use mm_access(): - do_task_stat(): grab exec_update_lock - proc_pid_wchan(): grab exec_update_lock - proc_map_files_lookup(): use mm_access() instead of get_task_mm() - proc_map_files_readdir(): use mm_access() instead of get_task_mm() - proc_ns_get_link(): grab exec_update_lock - proc_ns_readlink(): grab exec_update_lock | ||||
| CVE-2026-64544 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contents pefile_digest_pe_contents() computes the trailing-data hash length as pelen - (hashed_bytes + certs_size). A crafted PE can make the addition exceed pelen, causing the unsigned subtraction to underflow to ~4 GiB. This is passed to crypto_shash_update() which reads out of bounds and panics on unmapped vmalloc guard pages. BUG: unable to handle page fault for address: ffffc900038d8000 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:sha256_blocks_generic (lib/crypto/sha256.c:152) Call Trace: <TASK> __sha256_update (lib/crypto/sha256.c:208) crypto_sha256_update (crypto/sha256.c:142) verify_pefile_signature (crypto/asymmetric_keys/verify_pefile.c:436) kexec_kernel_verify_pe_sig (kernel/kexec_file.c:151) __do_sys_kexec_file_load (kernel/kexec_file.c:406) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Kernel panic - not syncing: Fatal exception Validate that the addition does not overflow and the result does not exceed pelen before the subtraction. Return -ELIBBAD on failure. | ||||
| CVE-2026-64233 | 1 Linux | 1 Linux Kernel | 2026-08-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind uvc_function_bind() walks &opts->extension_units twice without holding opts->lock: - directly, for the iExtension string-descriptor fixup loop; - indirectly, four times via uvc_copy_descriptors() (once per speed), where the helper iterates uvc->desc.extension_units (which aliases &opts->extension_units) to size and emit XU descriptors. The configfs side (uvcg_extension_make / uvcg_extension_drop, in drivers/usb/gadget/function/uvc_configfs.c) takes opts->lock around its list_add_tail / list_del operations. A privileged userspace process that holds the configfs subtree open and writes the gadget UDC name to bind the function while concurrently rmdir()'ing an extensions subdir can race uvcg_extension_drop() against the bind-time list walks and dereference a freed struct uvcg_extension. Hold opts->lock from the start of the XU string-descriptor fixup through the last uvc_copy_descriptors() call, releasing on the descriptor-error path via a new error_unlock label that drops the lock before falling through to the existing error label. This matches the locking discipline of the configfs callbacks and removes the only remaining unsynchronised reader of the XU list during bind. Reachability: only privileged processes that can mount configfs and write to gadget UDC files can trigger the race, so this is a correctness fix rather than a security boundary. | ||||
| CVE-2026-64246 | 1 Linux | 1 Linux Kernel | 2026-08-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: reset: linkstation-poweroff: fix use-after-free in the linkstation_poweroff_init() Move of_node_put(dn) after the of_match_node() call, which still needs the node pointer. The node reference is correctly released after use. | ||||
| CVE-2026-64513 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Unconditionally recompute CR8 intercept on PPR update The TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exits when the guest's virtual TPR falls under the specified threshold, allowing KVM to inject previously masked interrupts. KVM handles these VM exits in handle_tpr_below_threshold(). Commit eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits") optimized this function by calling apic_update_ppr() instead of raising KVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there is a pending, deliverable interrupt. However, if there are no new interrupts pending, apic_update_ppr() does not issue the request. Thus, kvm_lapic_update_cr8_intercept() and vmx_update_cr8_intercept() are not called before VM entry, which results in a high, stale TPR_THRESHOLD. This is problematic due to the following sentence in 28.2.1.1 "VM-Execution Control Fields" in the SDM: The following check is performed if the “use TPR shadow” VM-execution control is 1 and the “virtualize APIC accesses” and “virtual-interrupt delivery” VM-execution controls are both 0: the value of bits 3:0 of the TPR threshold VM-execution control field should not be greater than the value of bits 7:4 of VTPR. This error condition is typically not observed when KVM runs on a bare metal system because modern processors support APICv, which enables virtual-interrupt delivery, and which KVM uses when possible. This causes the processor to no longer generate TPR-below-threshold exits and to no longer check TPR_THRESHOLD on entry. However, when running on older platforms, or under nested virtualization on a hypervisor that does not support virtual-interrupt delivery and enforces this check (like Hyper-V) this can cause a VM entry failure with hardware error 0x7, as seen in [1]. Call kvm_lapic_update_cr8_intercept() if apic_update_ppr() does not find a deliverable interrupt (and thus does not raise KVM_REQ_EVENT). Remove calls to kvm_lapic_update_cr8_intercept() on paths that end up in apic_update_ppr(), as they now become redundant. This ensures that any path that updates the guest's PPR also figures out if KVM needs to wait for a TPR change (using TPR_THRESHOLD on VMX or CR8 intercepts on SVM). | ||||
| CVE-2026-64524 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/hyperv: validate resolution_count and fix WIN8 fallback A SYNTHVID_RESOLUTION_RESPONSE with resolution_count > 64 walks past the supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT] array in the parse loop. Bound resolution_count against the array size, folded into the existing zero-check. When the WIN10 resolution probe fails, the caller in hyperv_connect_vsp() left hv->screen_*_max / preferred_* unpopulated, which sets mode_config.max_width / max_height to 0 and makes drm_internal_framebuffer_create() reject every userspace framebuffer with -EINVAL. The pre-WIN10 branch had the same gap for preferred_width / preferred_height. Use a single post-probe fallback guarded by screen_width_max == 0 so both paths converge on the WIN8 defaults. | ||||
| CVE-2026-64232 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: block: recompute nr_integrity_segments in blk_insert_cloned_request blk_insert_cloned_request() already recomputes nr_phys_segments against the bottom queue, because "the queue settings related to segment counting may differ from the original queue." The exact same reasoning applies to integrity segments: a stacked driver's underlying queue can have tighter virt_boundary_mask, seg_boundary_mask, or max_segment_size than the top queue, in which case blk_rq_count_integrity_sg() against the bottom queue produces a different count than the cached rq->nr_integrity_segments inherited from the source request by blk_rq_prep_clone(). When the cached count is lower than the bottom queue's actual count, blk_rq_map_integrity_sg() trips BUG_ON(segments > rq->nr_integrity_segments); on dispatch. The same families of stacked setups that motivated the existing nr_phys_segments recompute -- dm-multipath fanning out to nvme-rdma in particular -- can produce this. Mirror the nr_phys_segments handling: when the request carries integrity, recompute nr_integrity_segments against the bottom queue and reject the request if it exceeds the bottom queue's max_integrity_segments. blk_rq_count_integrity_sg() and queue_max_integrity_segments() are both already available via <linux/blk-integrity.h>, which blk-mq.c includes. This closes a latent gap in the stacking contract and brings the integrity-segment accounting in line with the existing phys-segment accounting. | ||||
| CVE-2026-64239 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: delete tried region in regions_rmdirs() DAMON sysfs maintains the DAMOS tried region directory objects via a linked list. When the user requests refresh of the directories, DAMON sysfs removes all the region directories first, and then generate updated regions directory on the empty space. The removal function (damon_sysfs_scheme_regions_rm_dirs()) only puts the kobj objects. Deletion of the container region object from the linked list is done inside the kobj release callback function. If somehow the callback invocation is delayed, the list will contain regions list that gonna be freed. If the updated region directories creation is started in this situation, the list can be corrupted and use-after-free can happen. Because the kobj objects are managed by only DAMON sysfs, the issue cannot happen in normal situation. But, such delays can be made on kernels that built with CONFIG_DEBUG_KOBJECT_RELEASE. On the kernel, the issue can indeed be reproduced like below. # damo start --damos_action stat # cd /sys/kernel/mm/damon/admin/kdamonds/0/ # for i in {1..10}; do echo update_schemes_tried_regions > state; done # dmesg | grep underflow [ 89.296152] refcount_t: underflow; use-after-free. Fix the issue by removing the region object from the list when decrementing the reference count. Also update damos_sysfs_populate_region_dir() to add the region object to the list only after the kobject_init_and_add() is success, so that fail of kobject_init_and_add() is not leaving the deallocated object on the list. The issue was discovered [1] by Sashiko. | ||||
| CVE-2026-64242 | 1 Linux | 1 Linux Kernel | 2026-08-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: net2280: Fix double free in probe error path usb_initialize_gadget() installs gadget_release() as the release callback for the embedded gadget device. The struct net2280 instance is therefore released through gadget_release() when the gadget device's last reference is dropped. The probe error path calls net2280_remove(), which tears down the partially initialized device and drops the gadget reference with usb_put_gadget(). Calling kfree(dev) afterwards can free the same object again. Drop the explicit kfree() and let the gadget device release callback handle the final free. This issue was found by a static analysis tool I am developing. | ||||
| CVE-2026-64247 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: hyper-v: Bound the bank index when querying sparse banks When checking if a VP ID is included in a sparse bank set, explicitly check that the ID can actually be contained in a sparse bank (the TLFS allows for a maximum of 64 banks of 64 vCPUs each). When handling a paravirtual TLB flush for L2, the VP ID is copied verbatim from the enlightened VMCS, without any bounds check, i.e. isn't guaranteed to be under the limit of 4096. Failure to check the bounds of the VP ID leads to an out-of-bounds read when testing the sparse bank, and super strictly speaking could lead to KVM performing an unnecessary TLB flush for an L2 vCPU. ================================================================== BUG: KASAN: use-after-free in hv_is_vp_in_sparse_set+0x85/0x100 [kvm] Read of size 8 at addr ffff88811ba5f598 by task hyperv_evmcs/2802 CPU: 12 UID: 1000 PID: 2802 Comm: hyperv_evmcs Not tainted 7.1.0-rc2 #7 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x51/0x60 print_report+0xcb/0x5d0 kasan_report+0xb4/0xe0 kasan_check_range+0x35/0x1b0 hv_is_vp_in_sparse_set+0x85/0x100 [kvm] kvm_hv_flush_tlb+0xe9e/0x16c0 [kvm] kvm_hv_hypercall+0xe6b/0x1e60 [kvm] vmx_handle_exit+0x485/0x1b60 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x22e3/0x5070 [kvm] kvm_vcpu_ioctl+0x5d0/0x10c0 [kvm] __x64_sys_ioctl+0x129/0x1a0 do_syscall_64+0xb9/0xcf0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f0e62d1a9bf </TASK> The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffffffffffffffff pfn:0x11ba5f flags: 0x4000000000000000(zone=1) raw: 4000000000000000 0000000000000000 00000000ffffffff 0000000000000000 raw: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88811ba5f480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88811ba5f500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff88811ba5f580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88811ba5f600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88811ba5f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint Opportunistically add a compile time assertion to ensure the maximum number of sparse banks exactly matches the number of possible bits in the passed in mask. [sean: add KASAN splat, drop comment, add assert, massage changelog] | ||||
| CVE-2026-64248 | 1 Linux | 1 Linux Kernel | 2026-08-05 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: smp: report dying CPU to RCU in stop_this_cpu() smp_send_stop() parks all secondary CPUs in stop_this_cpu(). The function marks the CPU offline for the scheduler via set_cpu_online(false) but never informs RCU, so RCU keeps expecting a quiescent state from CPUs that are now spinning forever with interrupts disabled. As long as nothing waits for an RCU grace period after smp_send_stop() this is harmless, which is why it went unnoticed. Since commit 91840be8f710 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT") however, irq_work_sync() calls synchronize_rcu() on architectures without an irq_work self-IPI, i.e. where arch_irq_work_has_interrupt() returns false. That is the asm-generic default used by MIPS. Any irq_work_sync() issued in the reboot/shutdown path after smp_send_stop() then blocks on a grace period that can never complete, hanging the reboot: WARNING: CPU: 0 PID: 15 at kernel/irq_work.c:144 irq_work_queue_on ... rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: Offline CPU 1 blocking current GP. rcu: Offline CPU 2 blocking current GP. rcu: Offline CPU 3 blocking current GP. This issue was noticed on several Realtek MIPS switch SoCs (MIPS interAptiv) and came up during kernel bump downstream in OpenWrt from 6.18.33 to 6.18.34, after the backport of the patch to the 6.18 stable branch. The patch also has been backported all the way back to 6.1. Call rcutree_report_cpu_dead() once interrupts are disabled, mirroring the generic CPU-hotplug offline path, so RCU stops waiting on the parked CPUs and grace periods can still complete. MIPS shuts down all CPUs here without going through the CPU-hotplug mechanism, so this report is not otherwise issued. Reporting a dying CPU to RCU outside the regular hotplug offline path is not unprecedented: arm64 does the same in cpu_die_early(). There it is an exception for a CPU that was coming online and is aborting bringup, rather than the default shutdown action as on MIPS. | ||||
| CVE-2026-64282 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Don't leak PFN when kvm_translate_vncr() races MMU notifier In the case that kvm_translate_vncr() races with an MMU notifier the early return does not release a reference on the faulted in PFN. Add the necessary call to kvm_release_faultin_page() for the unused PFN. | ||||
| CVE-2026-64312 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - restore callback for non-parallel fallback pcrypt installs pcrypt_aead_done() on the child AEAD request before trying to submit it through padata. If padata_do_parallel() returns -EBUSY, pcrypt falls back to calling the child AEAD directly. That fallback must not keep the padata completion callback. Otherwise an asynchronous completion runs pcrypt_aead_done() even though the request was never enrolled in padata. Restore the original request callback and callback data before calling the child AEAD directly. This keeps the fallback path aligned with a direct AEAD request while leaving the parallel path unchanged. | ||||
| CVE-2026-64316 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: caam - use print_hex_dump_devel to guard key hex dumps Use print_hex_dump_devel() for dumping sensitive key material in *_setkey() and gen_split_key() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled. | ||||
| CVE-2026-64438 | 1 Linux | 1 Linux Kernel | 2026-08-05 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - fix VF2PF work teardown race in adf_disable_sriov() The VF2PF interrupt handler queues PF-side response work that stores a raw pointer to per-VF state (struct adf_accel_vf_info). Currently, adf_disable_sriov() destroys per-VF mutexes and frees vf_info without stopping new VF2PF work or waiting for in-flight workers to complete. A concurrently scheduled or already queued worker can then dereference freed memory. This manifests as a use-after-free when KASAN is enabled: BUG: KASAN: null-ptr-deref in mutex_lock+0x76/0xe0 Write of size 8 at addr 0000000000000260 by task kworker/24:2/... Workqueue: qat_pf2vf_resp_wq adf_iov_send_resp [intel_qat] Call Trace: kasan_report+0x119/0x140 mutex_lock+0x76/0xe0 adf_gen4_pfvf_send+0xd4/0x1f0 [intel_qat] adf_recv_and_handle_vf2pf_msg+0x290/0x360 [intel_qat] adf_iov_send_resp+0x8c/0xe0 [intel_qat] process_one_work+0x6ac/0xfd0 worker_thread+0x4dd/0xd30 kthread+0x326/0x410 ret_from_fork+0x33b/0x670 Add a PF-local flag, vf2pf_disabled, that gates work queueing, worker processing, and interrupt re-enabling during teardown. Set this flag atomically with the hardware interrupt mask inside adf_disable_all_vf2pf_interrupts(). After masking, synchronize the AE cluster MSI-X interrupt and flush the PF response workqueue before tearing down per-VF locks and state so all in-flight work completes before vf_info is destroyed. Introduce adf_enable_all_vf2pf_interrupts() to clear the flag and unmask all VF2PF interrupts under the same lock when SR-IOV is re-enabled. This ensures the software flag and hardware state transition atomically on both the enable and disable paths. | ||||