| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: validate rx_req_idx to prevent out-of-bounds array access
In mana_hwc_rx_event_handler(), rx_req_idx is derived from
sge->address in DMA-coherent memory. In Confidential VMs
(SEV-SNP/TDX), this memory is shared unencrypted and HW can modify
WQE contents at any time. No bounds check exists on rx_req_idx,
which can lead to an out-of-bounds access into reqs[].
Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before
using it to index the reqs[] array. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: aggregator: fix a potential use-after-free
On error we free aggr->lookups->dev_id before removing the entry from
the lookup table. If a concurrent thread calls gpiod_find() before we
remove the entry, it could iterate over the list and call
gpiod_match_lookup_table() which unconditionally dereferences dev_id
when calling strcmp(). Reverse the order of cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
net: shaper: rework the VALID marking (again)
Recent commit changed the semantics from NOT_VALID to VALID.
I didn't realize that the flags are not stored atomically
with the entry in XArray. There's still a race of reader
observing a VALID mark for a slot, getting interrupted,
writer replacing the entry with a different one, reader
continuing, fetching the entry which is now a different
pointer than the pointer for which VALID was meant.
The biggest consequence of this is that we may see a UAF
since net_shaper_rollback() assumed that entries without
VALID can be freed without observing RCU.
Looks like the XArray marks are buying us nothing at this
point. Let's convert the code to an explicit valid field.
The smp_load_acquire() / smp_store_release() barriers are
marginally cleaner. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/rstat: validate cpu before css_rstat_cpu() access
css_rstat_updated() is exposed as a BPF kfunc and accepts a
caller-provided cpu argument. The function uses cpu for per-cpu rstat
lookups without checking whether it refers to a valid possible CPU.
A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an
invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu ==
0x7fffffff triggers:
UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9
index 2147483647 is out of range for type 'long unsigned int [64]'
Call Trace:
css_rstat_updated
bpf_iter_run_prog
cgroup_iter_seq_show
bpf_seq_read
Add cpu validation to the BPF-facing css_rstat_updated() kfunc and
move the common implementation to __css_rstat_updated() for in-kernel
callers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/snapshot: fix dumping of the unaligned regions
The snapshotting code internally aligns data segment to 16 bytes. This
works fine for DPU code (where most of the regions are aligned), but
fails for snapshotting of the DSI data (because DSI data region is
shifted by 4 bytes). Fix the code by removing length alignment and by
accurately printing last registers in the region. While reworking the
code also fix the 16x memory overallocation in
msm_disp_state_dump_regs().
Patchwork: https://patchwork.freedesktop.org/patch/725449/ |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix folio->private handling in netfs_perform_write()
Under some circumstances, netfs_perform_write() doesn't correctly
manipulate folio->private between NULL, NETFS_FOLIO_COPY_TO_CACHE, pointing
to a group and pointing to a netfs_folio struct, leading to potential
multiple attachments of private data with associated folio ref leaks and
also leaks of netfs_folio structs or netfs_group refs.
Fix this by consolidating the place at which a folio is marked uptodate in
one place and having that look at what's attached to folio->private and
decide how to clean it up and then set the new group. Also, the content
shouldn't be flushed if group is NULL, even if a group is specified in the
netfs_group parameter, as that would be the case for a new folio. A
filesystem should always specify netfs_group or never specify netfs_group.
The Sashiko auto-review tool noted that it was theoretically possible that
the fpos >= ctx->zero_point section might leak if it modified a streaming
write folio. This is unlikely, but with a network filesystem, third party
changes can happen. It also pointed out that __netfs_set_group() would
leak if called multiple times on the same folio from the "whole folio
modify section". |
| In the Linux kernel, the following vulnerability has been resolved:
fprobe: Fix unregister_fprobe() to wait for RCU grace period
Commit 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer")
changed fprobe to register struct fprobe to an rcu-hlist, but it forgot
to wait for RCU GP. Thus there can be use-after-free if the fprobe is
released right after unregistering. This can be happened on fprobe
event and sample module code.
To fix this issue, add synchronize_rcu() in unregister_fprobe().
Note that BPF is OK because fprobe is used as a part of
bpf_kprobe_multi_link. This unregisters its fprobe in
bpf_kprobe_multi_link_release() and it is deallocated via
bpf_kprobe_multi_link_dealloc(), which is invoked from
bpf_link_defer_dealloc_rcu_gp() RCU callback.
For BPF, this also introduced unregister_fprobe_async() which does
NOT wait for RCU grace priod. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tp_meter: directly shut down timer on cleanup
batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by
timer_delete() to guard against the timer handler re-arming itself between
the two calls. This double-deletion hack relied on the sending status being
set to 0 to suppress re-arming.
Replace both calls with a single timer_shutdown_sync(). This function both
waits for any running timer callback to complete (like timer_delete_sync())
and permanently disarms the timer so it cannot be re-armed afterwards,
making re-arming prevention unconditional and self-documenting.
The re-arming property is also required because otherwise:
1. context 0 (batadv_tp_recv_ack()) checks in
batadv_tp_reset_sender_timer() if sending is still 1 -> it is
2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in
this process forces the kthread to stop timer in
batadv_tp_sender_cleanup()
3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the
timer -> but the reference for it is already gone |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Reject MPA FPDU length underflow before signed receive math
A malicious connected siw peer can send an iWARP FPDU whose MPA length
field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller
than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP
parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode]
.hdr_len, but never compares mpa_len against that header length.
siw_tcp_rx_data() then derives
srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd
+ MPA_HDR_SIZE;
where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this
point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest
on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below
hdr_len - MPA_HDR_SIZE underflows to a negative int.
The signed value then flows into siw_proc_write()/siw_proc_rresp() as
bytes = min(srx->fpdu_part_rem, srx->skb_new);
is handed to siw_check_mem() as an int len (whose interval check
addr + len > mem->va + mem->len is satisfied for a valid base when
len is negative), and reaches siw_rx_data() -> siw_rx_kva() /
siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header
copy branch in skb_copy_bits() promotes that to size_t, producing a
multi-gigabyte read.
KASAN under a KUnit harness that drives the real kernel TCP receive
path -- a loopback AF_INET socketpair, the malformed FPDU written via
kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock
dispatching to siw_tcp_rx_data -- reports:
BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480
Read of size 4294967295 at addr ffff888...
Call Trace:
skb_copy_bits
siw_rx_kva
siw_rx_data
siw_check_mem
siw_proc_write
siw_tcp_rx_data
__tcp_read_sock
siw_qp_llp_data_ready
tcp_data_ready
tcp_data_queue
Add the missing invariant at the earliest point where the peer header
is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly
the value the siw transmitter uses as the minimum mpa_len for each
opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the
protocol contract. Out-of-range FPDUs terminate the connection with
TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which
is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields
do not agree on the start of an FPDU"), the correct framing-error
class for this inconsistency. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: fix potential skb leak in igc_fpe_xmit_smd_frame()
When igc_fpe_init_tx_descriptor() fails, no one takes care of an
allocated skb, leaking it. [1]
Use dev_kfree_skb_any() on failure.
Tested on an I226 adapter with the following command, while injecting
faults in igc_fpe_init_tx_descriptor() to trigger the error path.
# ethtool --set-mm $DEV verify-enabled on tx-enabled on pmac-enabled on
[1]
unreferenced object 0xffff888113c6cdc0 (size 224):
...
backtrace (crc be3d3fda):
kmem_cache_alloc_node_noprof+0x3b1/0x410
__alloc_skb+0xde/0x830
igc_fpe_xmit_smd_frame.isra.0+0xad/0x1b0
igc_fpe_send_mpacket+0x37/0x90
ethtool_mmsv_verify_timer+0x15e/0x300 |
| In the Linux kernel, the following vulnerability has been resolved:
lsm: hold cred_guard_mutex for lsm_set_self_attr()
Just as proc_pid_attr_write() already does before calling the LSM
hook. This only matters for SELinux and AppArmor which check
whether the process is being ptraced and if so, whether to
allow the transition. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: raw: reject IP_HDRINCL packets with ihl < 5
raw_send_hdrinc() validates that the caller-supplied IPv4 header
fits within the message length:
iphlen = iph->ihl * 4;
err = -EINVAL;
if (iphlen > length)
goto error_free;
if (iphlen >= sizeof(*iph)) {
/* fix up saddr, tot_len, id, csum, transport_header */
}
It does not, however, reject ihl < 5. For such a packet the
"if (iphlen >= sizeof(*iph))" branch is skipped, leaving the
crafted iphdr untouched, but the packet is still handed to
__ip_local_out() and onward. Downstream consumers that read
iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in
particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4
and passes the (signed-int-negative, then cast to size_t)
result to memcpy(), producing an OOB access of length close to
SIZE_MAX and a host kernel panic.
An IPv4 header with ihl < 5 is malformed by definition (RFC 791:
"Internet Header Length is the length of the internet header in
32 bit words ... Note that the minimum value for a correct header
is 5."). The kernel should not be willing to inject such a
packet into its own output path.
Reject "iphlen < sizeof(*iph)" alongside the existing
"iphlen > length" check. This matches the principle that locally
constructed packets that re-enter the IP stack must pass the same
basic sanity tests that a foreign packet would be subjected to.
Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around
the fixup branch becomes redundant; left in place to keep the
patch minimal and backport-friendly. A follow-up can unwrap it.
Note that commit 86f4c90a1c5c ("ipv4, ipv6: ensure raw socket
message is big enough to hold an IP header") ensures the message
buffer is large enough to hold an iphdr, but does not constrain
the self-reported iph->ihl.
Reachability: the malformed packet source is any caller with
CAP_NET_RAW, including an unprivileged process in a user+net
namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH
crash also requires a matching xfrm AH policy on the outgoing
route; a container granted CAP_NET_ADMIN can install that state
and policy in its netns. Loopback bypasses xfrm_output, so the
trigger uses a real netdev.
Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with
memcpy_orig at the crash site. Same shape reproduces inside a
rootless Docker container with --cap-add NET_ADMIN on a stock
distro kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb
ieee80211_invoke_fast_rx() reads RX status through
IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage
that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the
unicast forward path, mesh_data does:
info = IEEE80211_SKB_CB(fwd_skb);
memset(info, 0, sizeof(*info));
on the same skb the caller still names via rx->skb, then either
queues the skb for TX (success) or kfree_skb()'s it (no-route)
before returning RX_QUEUED. The caller's RX_QUEUED arm then
calls sta_stats_encode_rate(status) on memory that is either
zeroed (success path) or freed (no-route path). The latter is
KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.
Fix by encoding the rate from status before invoking
ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value
captured while status was still backed by valid memory. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: appleir: fix UAF on pending key_up_timer in remove()
appleir_remove() runs hid_hw_stop() before timer_delete_sync().
hid_hw_stop() synchronously unregisters the HID input device via
hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(),
which drops the last reference and frees the underlying input_dev when
no userspace handle holds it open.
key_up_tick() reads appleir->input_dev and calls input_report_key() /
input_sync() on it. The timer is armed from appleir_raw_event() with
a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a
key was pressed shortly before the device is disconnected, the timer
can fire after hid_hw_stop() has freed input_dev but before the
teardown drains it.
A simple reorder is not sufficient. Putting the timer drain first
still leaves a window where a USB URB completion (raw_event) running
during hid_hw_stop() can call mod_timer() and re-arm the timer, which
then fires after hidinput_disconnect() has freed input_dev. The same
URB-completion window also lets raw_event() reach key_up(), key_down()
and battery_flat() directly, all of which dereference
appleir->input_dev.
Introduce a 'removing' flag on struct appleir, gated by the existing
spinlock. appleir_remove() sets the flag under the lock and then
shuts down the timer with timer_shutdown_sync(), which both drains any
in-flight callback and permanently disables further mod_timer() calls.
appleir_raw_event() and key_up_tick() bail out early if the flag is
set, so no path can arm or run the timer, or dereference
appleir->input_dev, after remove() has started tearing down.
The keyrepeat and flatbattery branches of appleir_raw_event()
previously called into the input layer without holding the spinlock;
take it now so the flag check is well-defined. This incidentally
closes a pre-existing read-side race on appleir->current_key in the
keyrepeat branch.
This bug is structurally a sibling of commit 4db2af929279 ("HID:
appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been
present since the driver was introduced. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom: qmp-usbc: Fix out-of-bounds array access in dp swing config
swing_tbl and pre_emphasis_tbl are 4x4 arrays (valid indices 0-3), but
the boundary check uses "> 4" instead of ">= 4", allowing index 4 to
cause an out-of-bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
srcu: Don't queue workqueue handlers to never-online CPUs
While an srcu_struct structure is in the midst of switching from CPU-0
to all-CPUs state, it can attempt to invoke callbacks for CPUs that
have never been online. Worse yet, it can attempt in invoke callbacks
for CPUs that never will be online, even including imaginary CPUs not in
cpu_possible_mask. This can cause hangs on s390, which is not set up to
deal with workqueue handlers being scheduled on such CPUs. This commit
therefore causes Tree SRCU to refrain from queueing workqueue handlers
on CPUs that have not yet (and might never) come online.
Because callbacks are not invoked on CPUs that have not been
online, it is an error to invoke call_srcu(), synchronize_srcu(), or
synchronize_srcu_expedited() on a CPU that is not yet fully online.
However, it turns out to be less code to redirect the callbacks
from too-early invocations of call_srcu() than to warn about such
invocations. This commit therefore also redirects callbacks queued on
not-yet-fully-online CPUs to the boot CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it
In iwl_mld_remove_link, the link->fw_id is saved at the beginning of the
function so we have it after we freed the link.
But the link pointer can be NULL, and is not checked when the fw_id is
stored.
Fix it by simply freeing the link at the end of the function.
fFixes: 0e66a39f4f0e ("wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link()") |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/time: Remove redundant preempt_disable|enable() calls from arch_irq_work_raise()
A kernel panic is observed when handling machine check exceptions from
real mode.
BUG: Unable to handle kernel data access on read at 0xc00000006be21300
Oops: Kernel access of bad area, sig: 11 [#1]
MSR: 8000000000001003 <SF,ME,RI,LE> CR: 88222248 XER: 00000005
CFAR: c00000000003ffc4 DAR: c00000006be21300 DSISR: 40000000 IRQMASK: 0
NIP [c000000000029e40] arch_irq_work_raise+0x10/0x70
LR [c00000000003ffc8] machine_check_queue_event+0xa8/0x150
Call Trace:
[c0000000179d3c70] [c00000000003ff64] machine_check_queue_event+0x44/0x150
[c0000000179d3d30] [c0000000000084e0] machine_check_early_common+0x1f0/0x2c0
The crash occurs because arch_irq_work_raise() calls preempt_disable()
from machine check exception (MCE) handlers running in real mode. In
this context, accessing the preempt_count can fault, leading to the panic.
The preempt_disable()/preempt_enable() pair in arch_irq_work_raise()
was originally added by commit 0fe1ac48bef0 ("powerpc/perf_event: Fix
oops due to perf_event_do_pending call") to avoid races while raising
irq work from exception context.
Later, commit 471ba0e686cb ("irq_work: Do not raise an IPI when
queueing work on the local CPU") added preemption protection in
irq_work_queue() path, while commit 20b876918c06 ("irq_work: Use per
cpu atomics instead of regular atomics") added equivalent
protection in irq_work_queue_on() before reaching arch_irq_work_raise():
irq_work_queue() / irq_work_queue_on()
-> preempt_disable()
-> __irq_work_queue_local()
-> irq_work_raise()
-> arch_irq_work_raise()
As a result, callers other than mce_irq_work_raise() already execute
with preemption disabled, making the additional
preempt_disable()/preempt_enable() pair in arch_irq_work_raise()
redundant.
The arch_irq_work_raise() function executes in NMI context when called
from MCE handler. Hence we will not be preempted or scheduled out since
we are in NMI context with MSR[EE]=0. Therefore, it is safe to remove
the preempt_disable()/preempt_enable() calls from here.
Remove it to avoid accessing preempt_count from real mode context.
[Maddy: Fixed the commit title] |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix double free in rvu_rep_rsrc_init()
rvu_rep_rsrc_init() allocates queue memory before calling
otx2_init_hw_resources(). When hardware resource setup fails,
otx2_init_hw_resources() already unwinds the partially initialized
SQ, CQ, and aura state before returning an error. The representor
error path then calls otx2_free_hw_resources() again and can free
the same resources a second time.
Fix this by splitting the cleanup labels so that a failure from
otx2_init_hw_resources() only releases queue memory. Keep the
otx2_free_hw_resources() call for failures that happen after
hardware resource initialization completed successfully.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime validation was not performed because reproducing this path
requires OcteonTX2 representor hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: tps65219: fix irq_data.rdev not being assigned
Commit 64a6b577490c ("regulator: tps65219: Remove debugging helper
function") removed the tps65219_get_rdev_by_name() helper along with
the irq_data.rdev assignment that depended on it. This left
irq_data.rdev uninitialized for all IRQs, causing undefined behavior
when regulator_notifier_call_chain() is called from the IRQ handler:
Internal error: Oops: 0000000096000004
pc : regulator_notifier_call_chain
lr : tps65219_regulator_irq_handler
Call trace:
regulator_notifier_call_chain
tps65219_regulator_irq_handler
handle_nested_irq
regmap_irq_thread
irq_thread_fn
irq_thread
kthread
ret_from_fork
Instead of restoring a dedicated lookup array, restructure the probe
function to combine regulator registration with IRQ registration in
the same loop. This way the rdev returned by devm_regulator_register()
is naturally available for assigning to irq_data.rdev without any
auxiliary data structure.
Non-regulator IRQs (SENSOR, TIMEOUT) that don't correspond to any
registered regulator are registered with rdev=NULL, and the IRQ handler
is protected with a NULL check to avoid crashing. |
